Dosimetry and microdosimetry of 10-220聽MeV proton beams with CR-39 and their verifications by calculation of reaction cross sections using ALICE, TALYS and GEANT4 codes

详细信息	查看全文 | 推荐本文 |

• 作者：M. Ghergherehchi^a ; H. Afarideh^b ; Y.S. Kim^c ; S.Y. Park^d ; S.B. Lee^e ; D.H. Shin^e ; J.S. Chai^a ; ^f ; ^{jschai@skku.edu} ; X.J. Mu^a ; B.N. Lee^a
• 关键词：High energy protons ; Track etch detectors ; CR-39 ; Secondary particles ; Alice code ; TALYS code ; Microdosimetry ; GEANT4 code
• 刊名：Radiation Measurements
• 出版年：2012
• 期刊代码：71_13504487
• 类别：ce
• 出版时间：June, 2012
• 卷：47
• 期：6
• 页码：410-416
• 文件大小：430 K

摘要

High- and intermediate-energy protons are not able to directly form a track in a CR-39 etch detector (TED). Such detectors, however, can be used for the detection and dosimetry of the beams of these particles through the registration of secondary charged particles with sufficiently high values of linear energy transfer (LET). High-energy protons (72-220聽MeV) and Intermediate-energy protons (10-30聽MeV) with low LET values ranging from 1.1 down to 0.4聽keV/渭m and 5.87 down to 2.40聽keV/渭m, respectively are considered in this study. It seems to be sufficient to create secondary particles, although the LET values are low. This phenomenon can modify the characteristics of the energy transfer process due to these particles, which should be taken into account when such particles are used for radiobiology studies or for radiotherapy. The importance of these secondary particles was investigated experimentally by means of an LET spectrometer based on a chemically etched track detector in which the tracks of the primary protons are not revealed. Experiments were performed with proton beams available at the Nuclear Research Center for Agriculture and Medicine (NRCAM) in Karaj, Iran and at the National Cancer Center (NCC) in Seoul, Korea with protons of primary energies of about 10-30聽MeV and 72-220聽MeV respectively. The contribution of the secondary particle dose increases as the proton energy decreases. The origin of the secondary particles in interactions with protons having high and intermediate energies due to various nuclear reactions was calculated by the both ALICE and TALYS computer codes. The secondary microdosimetry doses were also calculated by GEANT4 code. There is large discrepancy between experimental and calculated results in low proton energies. It has been verified that there is a good correlation between the experimentally obtained results and the reaction cross sections predicted by ALICE and TALYS codes.