Damage, defects and diffusion from ultra-low energy (0–5 keV) ion implantation of silicon
摘要
Continued use of ion implantation for doping of silicon integrated circuits will soon require implantation energies below 5 keV to form electrical junctions less than 50 nm deep. At such low energies, dopant diffusion and formation of extended defects is modified by both the proximity of the surface and by the large volume concentrations of point defects and dopant atoms that arise from reduced range straggling. This brief review summarizes our recent experiments which measured defect formation and evolution, as well as enhanced diffusion, in silicon implanted with Si+ and B+ ions at energies as low as 0.5 keV. The results have demonstrated that {311}-type extended defects are generated from Si+ implants even within 3 nm of the surface. However, when these defects eventually dissolve, the surface acts as a perfect sink to efficiently annihilate the released interstitials. As a result, the amount of TED from Si+ implantation measured by epitaxially-grown B markers decreases approximately linearly with decreasing ion energy. For sub-keV B+ implants typical doses currently used for source-drain doping lead to a boron diffusion enhancement of 3–4× despite the proximity of the surface. Enhanced diffusion is also observed from molecular beam-deposited silicon layers containing a high boron concentration. This newly emerged diffusion enhancement mechanism, boron-enhanced-diffusion (BED), is associated with the formation of a fine-grain polycrystalline silicon boride phase in the implanted layer during activation annealing. These investigations of ultra-low energy (ULE) implantation have thus reinforced and validated our understanding of the role of implantation damage in enhancing dopant diffusion in silicon, while simultaneously revealing some important new materials issues which will impact semiconductor processing in coming device generations.