Copper ion sensing with fluorescent electrospun nanofibers

详细信息	查看全文 | 推荐本文 |

• 作者：Merve Zeyrek Ongun^a ; ^{merve.zeyrek@deu.edu.tr} ; ^{mervezeyrek@gmail.com} ; Kadriye Ertekin^b ; ^d ; Mustafa Gocmenturk^a ; Yavuz Ergun^b ; Asl谋han Suslu^a ; ^c
• 关键词：Electrospinning ; Electrospun nanofiber ; Optical copper sensor ; Fiber optic chemical sensor ; Fluorescence
• 刊名：Spectrochimica Acta Part A ; Molecular and Biomolecular Spectroscopy
• 出版年：2012
• 期刊代码：99_13861425
• 类别：ch
• 出版时间：May, 2012
• 卷：90
• 期：Complete
• 页码：177-185
• 文件大小：1233 K

摘要

In this work, the use of electrospun nanofibrous materials as highly responsive fluorescence quenching-based copper sensitive chemosensor is reported. Poly(methyl methacrylate) and ethyl cellulose were used as polymeric support materials. Sensing slides were fabricated by electrospinning technique. Copper sensors based on the change in the fluorescence signal intensity of fluoroionophore; N鈥?3-(4-(dimethylamino phenly)allylidene)isonicotinohydrazide. The sensor slides exhibited high sensitivities due to the high surface area of the nanofibrous membrane structures. The preliminary results of Stern-Volmer analysis show that the sensitivities of electrospun nanofibrous membranes to detect Cu(II) ions are 6-20-fold higher than those of the continuous thin films. By this way we obtained linear calibration plots for Cu(II) ions in the concentration range of 10^鈭?2-10^鈭? M. The response times of the sensing slides were less than 1 min. Stability of the employed ionophore in the matrix materials was excellent and when stored in the ambient air of the laboratory there was no significant drift in signal intensity after 6 months. Our stability tests are still in progress.