Leaching experiments on the release of heavy metals and PAH from soil and waste materials

详细信息	查看全文 | 推荐本文 |

• 作者：O. Krü ; ger ; ^{oliver.krueger@bam.de} ; U. Kalbe ^{ute.kalbe@bam.de} ; W. Berger ^{wolfgang.berger@bam.de} ; F.-G. Simon ^{franz-georg.simon@bam.de} ; S. Ló ; pez Meza¹ ; ^{sarynna.lopez@alumni.vanderbilt.edu}
• 关键词：Column tests ; Batch tests ; Waste materials ; Leaching ; Standardization
• 刊名：Journal of Hazardous Materials
• 出版年：2012
• 期刊代码：50_03043894
• 类别：ce
• 出版时间：15 March, 2012
• 卷：207-208
• 期：Complete
• 页码：51-55
• 文件大小：340 K

摘要

Leaching tests are fundamental tools for the assessment of long-term impact of contaminated waste materials on the soil-groundwater pathway. Experiments were carried out in the framework of standardization and validation of column percolation and batch test procedures, in particular concerning the stipulation of the experimental setup. The colloid release of column and batch experiments was compared and the influence of different column filling heights (12.5-50 cm) on the release of polycyclic aromatic hydrocarbons (PAH) from soil was studied, as well as the effect of varying contact times (2.5-16 h) on the release of chromium from construction and demolition (C&D) waste and municipal solid waste incineration (MSWI) bottom ash. The results indicate that filtration of the eluate, which is required for batch tests, does not always allow the simulation of the actual colloid amount in soil pore water. Medium column heights four times the inner diameter of the column seemed to provide reasonable equilibrium adjustment conditions and avoid major biodegradation. The release of chromium was only marginally affected by the contact time, varied between 0.115 and 0.150 mg/kg for demolition waste eluate at a liquid-to-solid ratio of approximately 5 L/kg.