Effects of the H₂S partial pressure on the performance of bimetallic noble-metal molybdenum catalysts in simultaneous hydrogenation and hydrodesulfurization reactions

详细信息	查看全文 | 推荐本文 |

• 作者：David Pé ; rez-Martí ; nez ; Sonia A. Giraldo ; Aristó ; bulo Centeno
• 关键词：Hydrotreatment ; Hydrodesulfurization ; Noble-metal molybdenum catalysts ; H₂S partial pressure ; TPR
• 刊名：Applied Catalysis A ; General
• 出版年：2006
• 期刊代码：4_0926860x
• 类别：ch
• 出版时间：23 November 2006
• 卷：315
• 期：Complete
• 页码：35-43
• 文件大小：594 K

摘要

The influence of the H₂S concentration on the activity and selectivity to hydrodesulfurization (HDS) of bimetallic noble-metal molybdenum (NM–Mo, NM = Pt, Ru, Pd) supported on γ-Al₂O₃ catalysts was studied. The effect of H₂S on the modification of the HDS pathway and the influence of the Mo loading on the sulfur resistance of catalysts were also analyzed. NM–Mo/γ-Al₂O₃ and conventional CoMo/γ-Al₂O₃ catalysts were prepared and evaluated in simultaneous dibenzothiophene (DBT) HDS and naphthalene hydrogenation (HYD) reaction cycles, in the presence of dimethyl disulfide (DMDS) in order to obtain H₂S partial pressures of 10, 30 and 50 kPa. Catalysts were characterized by atomic absorption spectroscopy and temperature-programmed reduction of sulfides (TPRS). TPRS experiments after exposing catalysts to simulated reaction conditions (TPRS-SRC) were also performed. Results show that the H₂S does not poison the studied catalysts, but an inhibition of both HYD and HDS reactions is observed. The inhibition of catalyst activities is attributed to the interconversion of HDS, HYD and inactive sites; this interconversion is influenced by the H₂S/H₂ ratio, the nature of the NM and the composition of catalysts. Activity, TPRS and TPRS-SRC results confirmed this scheme. A modification of the reaction pathway was observed when the H₂S partial pressure was increased; the direct desulfurization was principally affected. The interconversion of sites could explain this modification. Moreover, our results show that the Mo loading and specifically the Pt/Mo ratio, which determine the Pt dispersion, influence the sulfur resistance of the catalyst.