Effect of grain size on tensile properties of fine-grained metastable 尾 titanium alloys fabricated by stress-induced martensite and its reverse transformations

详细信息	查看全文 | 推荐本文 |

• 作者：Ming-Hui Cai ; Chan-Young Lee ; Young-Kook Lee ; ^{yklee@yonsei.ac.kr}
• 关键词：Metastable 尾 titanium alloy ; Stress-induced martensitic transformation ; Grain size ; Strain hardening ; Tensile properties
• 刊名：Scripta Materialia
• 出版年：2012
• 期刊代码：157_13596462
• 类别：et
• 出版时间：April, 2012
• 卷：66
• 期：8
• 页码：606-609
• 文件大小：512 K

摘要

Fine-grained Ti-16V-3.5Al-3Sn alloys were fabricated through the stress-induced martensite and its reverse transformations. All tensile curves of the alloys showed double yielding, high strain hardening and low trigger stress for martensitic transformation. As the grain size increased, the trigger stress decreased and then increased again, while the dimples on the fractured surface became large and non-uniform. The three-stage strain hardening and high strain-hardening rate were closely associated with the stress-induced 尾 to 伪鈥?martensitic transformation and dislocation hardening.