Multi-objective optimization of laser-scribed micro grooves on AZO conductive thin film using Data Envelopment Analysis

详细信息	查看全文 | 推荐本文 |

• 作者：Chung-Feng Jeffrey Kuo^a ; ^{jeffreykuo@mail.ntust.edu.tw} ; Huy Quang Vu^a ; Dewantoro Gunawan^a ; Wei-Luen Lan^b
• 关键词：Laser scribing system ; Multi-objective optimization ; Data Envelopment Analysis
• 刊名：Optics and Laser Technology
• 出版年：2012
• 期刊代码：48_00303992
• 类别：ph
• 出版时间：September, 2012
• 卷：44
• 期：6
• 页码：1959-1970
• 文件大小：791 K

摘要

Laser scribing process has been considered as an effective approach for surface texturization on thin film solar cell. In this study, a systematic method for optimizing multi-objective process parameters of fiber laser system was proposed to achieve excellent quality characteristics, such as the minimum scribing line width, the flattest trough bottom, and the least processing edge surface bumps for increasing incident light absorption of thin film solar cell. First, the Taguchi method (TM) obtained useful statistical information through the orthogonal array with relatively fewer experiments. However, TM is only appropriate to optimize single-objective problems and has to rely on engineering judgment for solving multi-objective problems that can cause uncertainty to some degree. The back-propagation neural network (BPNN) and data envelopment analysis (DEA) were utilized to estimate the incomplete data and derive the optimal process parameters of laser scribing system. In addition, analysis of variance (ANOVA) method was also applied to identify the significant factors which have the greatest effects on the quality of scribing process; in other words, by putting more emphasis on these controllable and profound factors, the quality characteristics of the scribed thin film could be effectively enhanced. The experiments were carried out on ZnO:Al (AZO) transparent conductive thin film with a thickness of 500 nm and the results proved that the proposed approach yields better anticipated improvements than that of the TM which is only superior in improving one quality while sacrificing the other qualities. The results of confirmation experiments have showed the reliability of the proposed method.