Domestic hot water consumption vs. solar thermal energy storage: The optimum size of the storage tank

详细信息	查看全文 | 推荐本文 |

• 作者：M.C. Rodrí ; guez-Hidalgo^a ; ^{mariadelcarmen.rodriguez.hidalgo@upm.es} ; P.A. Rodrí ; guez-Aumente^b ; A. Lecuona^b ; M. Legrand^b ; R. Ventas^b
• 关键词：Renewable energy ; Solar thermal energy ; Water storage tank ; Transient simulation ; Heat storage ; Domestic hot water
• 刊名：Applied Energy
• 出版年：2012
• 期刊代码：2_03062619
• 类别：pw
• 出版时间：September, 2012
• 卷：97
• 期：Complete
• 页码：897-906
• 文件大小：1168 K

摘要

Many efforts have been made in order to adequate the production of a solar thermal collector field to the consumption of domestic hot water of the inhabitants of a building. In that sense, much has been achieved in different domains: research agencies, government policies and manufacturers. However, most of the design rules of the solar plants are based on steady state models, whereas solar irradiance, consumption and thermal accumulation are inherently transient processes. As a result of this lack of physical accuracy, thermal storage tanks are sometimes left to be as large as the designer decides without any aforementioned precise recommendation. This can be a problem if solar thermal systems are meant to be implemented in nowadays buildings, where there is a shortage of space. In addition to that, an excessive storage volume could not result more efficient in many residential applications, but costly, extreme in space consumption and in some cases too heavy.

A proprietary transient simulation program has been developed and validated with a detailed measurement campaign in an experimental facility. In situ environmental data have been obtained through a whole year of operation. They have been gathered at intervals of 10 min for a solar plant of 50 m² with a storage tank of 3 m³, including the equipment for domestic hot water production of a typical apartment building.

This program has been used to obtain the design and dimensioning criteria of DHW solar plants under daily transient conditions throughout a year and more specifically the size of the storage tank for a multi storey apartment building.

Comparison of the simulation results with the current Spanish regulation applicable, 鈥淐贸digo T茅cnico de la Edificaci贸n鈥?(CTE 2006), offers fruitful details and establishes solar facilities dimensioning criteria.