Design and control of reactive distillation for ethyl and isopropyl acetates production with azeotropic feeds
- 作者：I-Kuan Lai ; Shih-Bo Hung ; Wan-Jen Hung ; Cheng-Ching Yu ; Ming-Jer Lee ; Hsiao-Ping Huang
- 关键词：Ethyl acetate ; Isopropyl acetate ; Azeotrope ; Reactive distillation ; Control ; Design
- 刊名：Chemical Engineering Science
- 出版年：2007
- 期刊代码：18_00092509
- 类别：ce
- 出版时间：February 2007
- 卷：62
- 期：3
- 页码：878-898
- 文件大小：802 K
摘要
Reactive distillations for the production of ethyl acetate (EtAc) and isopropyl acetate (IPAc) are classified as the type-II process where the first column consists of a reactive zone and a rectifying section followed by a stripper [Tang et al., 2005. Design of reactive distillations for acetic acid esterification with different alcohols. A.I.Ch.E. Journal 51, 1683–1699]. Instead of using pure alcohols and acetic acid as reactants, this paper studies the effects of reactant purity on the design and control of reactive distillation. This offers significant economical incentives (by reducing raw materials costs), because ethanol forms an azeotrope with water at 90 mol%and isopropanol/water has an azeotrope at 68%. The purities of the acid is set to 95%for acetic acid (industrial grade), 87%for ethanol, and 65%for isopropanol. The results show that the total annual costs (TAC) increase by a factor of 5%for EtAc and 8%for IPAc production using reactive distillation. Next, the operability of the reactive distillations with azeotrope feeds is explored. Three disturbances, feed flow, acid feed purity, and alcohol feed composition, are introduced to assess control performance using dual-temperature control and one-temperature-one-composition control. Simulation results indicate good control performance can be achieved for reactive distillation with azeotropic feeds.