Pervaporation separation of water + 1,4-dioxane and water + tetrahydrofuran mixtures using sodium alginate and its blend membranes with hydroxyethylcellulose—A comparative study
- 作者：B. Vijaya Kumar Naidu ; K.S.V. Krishna Rao and Tejraj M. Aminabhavi
- 关键词：Blend membranes ; Pervaporation ; Sodium alginate ; Hydroxyethylcellulose
- 刊名：Journal of Membrane Science
- 出版年：2005
- 期刊代码：55_03767388
- 类别：ch
- 出版时间：2005
- 卷：260
- 期：1-2
- 页码：131-141
- 文件大小：446 K
摘要
Sodium alginate and hydroxyethylcellulose blend membranes were prepared by solution casting, crosslinked with glutaraldehyde and ureaȁ3;formaldehydeȁ3;sulfuric acid mixture. Crosslinking was confirmed by Fourier transform infrared spectroscopy, while the blend compatibility was studied by differential scanning calorimetry and scanning electron microscopy. Membranes were tested for pervaporation separation of feed mixtures ranging from 10 to 50 mass%water in water + 1,4-dioxane and water + tetrahydrofuran mixtures at 30 °C. For 10 mass%of the feed mixture, pervaporation experiments were also carried out at higher temperatures (40 and 50 °C). By increasing the temperature, a slight increase in flux with a considerable decrease in selectivity was observed for all the membranes and for both the mixtures. The blend membranes exhibited different pervaporation performance for both the binary mixtures investigated. For water + 1,4-dioxane mixture, the pervaporation performance did not improve much after blending, whereas for water + tetrahydrofuran mixture, the pervaporation performance has improved considerably over that of plain sodium alginate membrane.