Shock attenuation of PMMA sandwich panels filled with soda-lime glass beads: A聽fluid-structure interaction continuum model simulation

详细信息	查看全文 | 推荐本文 |

• 作者：George A. Christou^a ; Laurence R. Young^a ; Rahul Goel^a ; Andrew P. Vechart^a ; Antoine Jé ; rusalem^a ; ^b ; ^{antoine.jerusalem@imdea.org}
• 关键词：Fluid&ndash ; structure interaction ; Shock propagation ; Finite element method ; Soda-lime glass ; Foam
• 刊名：International Journal of Impact Engineering
• 出版年：2012
• 期刊代码：82_0734743x
• 类别：et
• 出版时间：September, 2012
• 卷：47
• 期：Complete
• 页码：48-59
• 文件大小：2136 K

摘要

The dramatic increase of Improvised Explosive Device (IED) related injuries has stimulated many studies to reconsider the design of the current state-of-the-art vehicle and body protective equipment. Materials now need to be chosen not only to stop solid projectiles such as shrapnel or bullets but also to attenuate the injurious effects of incoming blast waves. New advanced computational models of such events have been proved to facilitate the access to information currently inaccessible to experiments. To this end, we developed a fluid-structure interaction computational continuum model to investigate the attenuation properties of foam specimens containing filler materials under shock loading. Three test specimens were examined: a solid foam sample, and two other foam samples incorporating an intermediate layer of filler material: SiO₂ aerogel and soda-lime glass beads. The model was then calibrated and the results compared to the corresponding shock tube experimental results [M.D. Alley, S.F. Son, G. Christou, R. Goel, L. Young, 2009]. In conclusion, the model shows good agreement with experiment values for the peak pressure of the transmitted wave as well as its propagation time. Complementing the existing experimental results, high density soda-lime glass beads filler material is shown to substantially decrease the peak magnitude of the transmitted wave and to decrease the spatial gradient of the pressure compared to the other lower density filler samples. However, the history of the sample reaction force suggests that the frame constraining the test specimen is being subjected to a higher impulse using the high density filler. Such a model paves the road to a new series of complex numerical models designed to accompany experimental testing by providing new insights on the mechanisms of fluid-structure interaction.