Detection of surface silanol groups on pristine and functionalized silica mixed oxides and zirconia

详细信息	查看全文 | 推荐本文 |

• 作者：Florian M. Wisser^a ; ^b ; Matthias Abele^c ; ^d ; Matthias Gasthauer^a ; Klaus Mü ; ller^c ; Norbert Moszner^e ; Guido Kickelbick^a ; ^{kickelbick@mx.uni-saarland.de}
• 关键词：Surface-functionalization ; Silanol content ; Silica ; Zirconia ; Mixed oxides ; Hydroxyl content
• 刊名：Journal of Colloid and Interface Science
• 出版年：2012
• 期刊代码：125_00219797
• 类别：ch
• 出版时间：15 May, 2012
• 卷：374
• 期：1
• 页码：77-82
• 文件大小：405 K

摘要

The surface hydroxyl content and surface structure of silica and other oxides with and without surface modification were systematically studied by solid state ²⁹Si NMR, thermogravimetric analysis, and the lithium alanate method. Aerosil 90 as a well described reference system and functionalized zirconia-silica particles were used in the validation of the lithium alanate method. 3-Methacryloxypropyltrimethoxysilane and dodecylphosphonic acid were applied as surface modifiers. The determination of silanol content of Aerosil 90 by ²⁹Si NMR and TGA confirms the results obtained by the lithium alanate method, which also allows for the determination of the remaining surface hydroxyl content after surface modification. For both silane coupling agents, the residual hydroxyl content of modified zirconia-silica is decreased by a factor of approximately 2 compared with that of the unmodified mixed oxide, whereas after modification with dodecylphosphonic acid, the hydroxyl content is slightly higher. These results are again in good agreement with those by ²⁹Si NMR confirming that the lithium alanate method is a reliable and easily practicable method for surface hydroxyl determination.