Biomechanical evaluation of bike power saver
- 作者：Gongbing Shan
- 关键词：3D motion capture ; Joint control ; Electromyography ; Frequency analysis ; Fatigue ; Efficiency
- 刊名：Applied Ergonomics
- 出版年：2008
- 期刊代码：13_00036870
- 类别：et
- 出版时间：January 2008
- 卷：39
- 期：1
- 页码：37-45
- 文件大小：836 K
摘要
Bike power saver (BPS) is a new product that claims to change the angle of pedaling forces and reduce applied power dead range (Chic Sheng Industrial Co., Ltd, Taiwan, China). In order to determine its effectiveness, we quantified how BPS operates through a 3D kinematical study and electromyography (EMG) analysis of leg muscles during pedaling. Ten kinesiology students participated in this study. A 3D motion capture system consisting of nine high-speed cameras (VICON v8i, a capture rate of 120 frames/s) was used to collect the total body and pedal motion with and without BPS at statically determined low, middle and high intensity cycling levels. The short-time test (14 s) was applied to all intensity levels while the long-time test (30 min) was applied only to the low wattage level. Wireless EMG was synchronized with the 3D motion capture system to monitor the right and left tibialis anterior, gastrocnemius, quadriceps and hamstring. The results revealed that BPS did not alter hip and knee movement significantly (p>0.05), but it did vary ankle movement. BPS caused a movement change in the pedals, and consequently induced instability in ankle control. The altered pedal movement led to an increase in activity level and presumably also energy expenditure for dominant muscles, resulting in a faster fatigue process. From these data, it is likely that the BPS actually requires more effort than a standard bike.