Influence of fibre treatments on mechanical properties of short Sansevieria cylindrica/polyester composites

详细信息	查看全文 | 推荐本文 |

• 作者：V.S. Sreenivasan^a ; ^{vssreenivasan@ymail.com} ; D. Ravindran^b ; ^{rmkv1@rediffmail.com} ; V. Manikandan^c ; ^{vaimanikandan@yahoo.com} ; R. Narayanasamy^d ; ^{narayan@nitt.edu}
• 关键词：A. Polymer matrix composites ; E. Mechanical ; G. Scanning electron microscopy
• 刊名：Materials and Design
• 出版年：2012
• 期刊代码：56_02613069
• 类别：ms
• 出版时间：May, 2012
• 卷：37
• 期：Complete
• 页码：111-121
• 文件大小：1714 K

摘要

In the present study, to improve the interfacial bond between Sansevieria cylindrica fibres (SCFs) and polyester matrix, chemical surface treatments have been performed on the fibres. Treatments including alkali, benzoyl peroxide, potassium permanganate and stearic acid were carried out to modify the fibre surface. Raw and each type of treated SCF samples were utilised separately for fabricating the composites. The mechanical properties of composites prepared from the chemically treated SCFs are found to be much better than those of the untreated ones. Potassium-permanganate-treated S. cylindrica fibre/polyester (PSCFP) composites showed optimum mechanical properties among the treated S. cylindrica fibre/polyester (SCFP) composites. The surface morphologies of fracture surfaces of composites were recorded using scanning electron microscopy (SEM). The SEM micrographs reveal that interfacial bonding between potassium-permanganate-treated SCF (PSCF) and polyester matrix has significantly improved, suggesting that better dispersion of PSCF into the matrix has occurred upon potassium permanganate treatment of SCF.