Characterization of microstructure and deformation behaviour of resistance spot welded AZ31 magnesium alloy

详细信息	查看全文 | 推荐本文 |

• 作者：N. Kishore Babu^a ; ^{kishorebn@simtech.a-star.edu.sg} ; S. Brauser^b ; M. Rethmeier^b ; ^c ; C.E. Cross^d
• 关键词：Resistance spot welding ; AZ31 magnesium alloy ; Microstructure ; Hardness ; Torsion ; Tensile&ndash ; shear
• 刊名：Materials Science and Engineering ; A
• 出版年：2012
• 期刊代码：61_09215093
• 类别：ms
• 出版时间：15 July, 2012
• 卷：549
• 期：Complete
• 页码：149-156
• 文件大小：2369 K

摘要

Resistance spot welds were prepared on 3 mm thick sheets of continuous cast and rolled AZ31 magnesium alloy. The microstructure and composition analysis of weld nugget, heat affected zone (HAZ) and base metal were examined using optical and scanning electron microscopy (HR-SEM and EDS/X). The resistance spot welded magnesium alloy joints consist mainly of weld nugget and HAZ. The nugget contains two different structures, i.e. the cellular-dendritic structure at the edge of the nugget and the equiaxed dendritic structure in the centre of the nugget. The structure transition is attributed to the changes of solidification conditions. In the HAZ, grain boundary melting occurred and grain boundaries became coarse. It has been shown that hardness reduction in the weld nugget and HAZ compared with base metal is evident due to dendritic microstructure and grain growth, respectively. The results showed that spot welded joints have failed in interfacial mode under torsion and tensile-shear loading conditions. Digital image correlation during tensile-shear testing showed that low surface strains occur in the interfacial failure mode, because fracture and deformation happened primarily in the nugget area.