Self-organized porous TiO2 and ZrO2 produced by anodization
- 作者：Hiroaki Tsuchiya ; Jan M. Macak ; Andrei Ghicov ; Luciano Taveira and Patrik Schmuki
- 关键词：Self-organization ; Nanotube ; Titanium oxide ; Zirconium oxide ; Anodization
- 刊名：Corrosion Science
- 出版年：2005
- 期刊代码：28_0010938x
- 类别：ch
- 出版时间：2005
- 卷：47
- 期：12
- 页码：3324-3335
- 文件大小：600 K
摘要
The present work investigates the electrochemical formation of self-organized high aspect ratio TiO2 and ZrO2 nanotube layers. The formation and growth of a self-organized porous layer can be achieved directly by anodization without any templates in fluoride containing electrolytes. The morphology of the porous layers is affected by the electrochemical conditions such as the electrolyte composition, the pH and the exact polarization treatment (such as the potential sweep rate from the open-circuit potential to the anodizing potential). For Ti, nanotube layers are formed with diameters varying from approx. 20 nm to 100 nm and lengths from approx. 0.25 μm to 2.5 μm depending on the electrolytes and pH. On the other hand, for Zr, tubes of 50 nm in diameter and up to approx. 17 μm in length can be grown—a key parameter in this case is the potential sweep rate. The large difference between Ti and Zr in the achievable thickness of nanotube layers indicates a difference in the growth mechanism which may be based on the different chemical dissolution rates of electrochemically formed oxides.