Flexible microfluidic normal force sensor skin for tactile feedback

详细信息	查看全文 | 推荐本文 |

• 作者：Ruben D. Ponce Wong^a ; ^{Ruben.Poncewong@asu.edu}  ; [Author Vitae] ; Jonathan D. Posner^b ; ^{jposner@uw.edu}  ; [Author Vitae] ; Veronica J. Santos^a ; ^{Veronica.Santos@asu.edu}  ; [Author Vitae]
• 关键词：Capacitive sensor ; Conductive fluid ; Flexible sensor ; Microfluidic force sensor ; Sensor skin ; Soft lithography
• 刊名：Sensors and Actuators A ; Physical
• 出版年：2012
• 期刊代码：160_09244247
• 类别：et
• 出版时间：June, 2012
• 卷：179
• 期：Complete
• 页码：62-69
• 文件大小：843 K

摘要

Robotic applications often require robust tactile sensing capabilities on curved surfaces, such as artificial fingertips. Flexible tactile sensors could be conformally wrapped around curved digits and could enhance grip by cushioning impacts and increasing the effective contact area during grasp. Flexible microfabricated devices that use thin film or solid electrical components are susceptible to failure due to cracking and fatigue. Conductive fluids have been used as transduction media, electrical connections, and in resistance-based pressure and bend sensors. In this work, a flexible and multilayer capacitive microfluidic normal force sensor is developed with a 5 脳 5 taxel array. The sensor uses liquid metal-filled microfluidic channels as the capacitive plates and conductive interconnects. The sensor is microfabricated using soft lithography microfabrication techniques and consists of multiple layers of PDMS microchannels filled with the liquid metal alloy Galinstan and air pockets that modify the mechanical and electrical properties of the sensor. A single taxel is calibrated for normal forces ranging from 0 to 2.5 N, is shown to provide repeatable measurements of static uniaxial loads, and follows the loading and unloading phases of low-frequency dynamic loads (0.4-4 Hz). The sensor prototype has a spatial resolution on the order of 0.5 mm, performs reliably when wrapped around a surface having a curvature similar to that of a human finger (1.575 cm^鈭?), and has been shown to tolerate curvatures as high as 6.289 cm^鈭?. The deformable liquid capacitive plates and heterogeneous PDMS-air dielectric medium can be designed to tune the sensor's sensitivity and range. The sensor prototype provides greater sensitivity at low loads, a feature which can be exploited for robotic applications in which light touch is important.