Treatment of ion exchange resins used in nuclear power plants by super- and sub-critical water oxidation - A road to commercial plant from bench-scale facility

详细信息	查看全文 | 推荐本文 |

• 作者：Kyeongsook Kim^a ; ^{kskim@kepri.re.kr} ; ^{96801025@kepco.co.kr} ; KwangSin Kim^a ; Mihwa Choi^a ; Soon Hwan Son^b ; Joo Hee Han^c
• 关键词：Super-critical water oxidation (SCWO) ; Sub-critical ; Waste ion exchange resin ; Pressurized water reactors (PWR) ; Radioactive
• 刊名：Chemical Engineering Journal
• 出版年：2012
• 期刊代码：16_13858947
• 类别：ce
• 出版时间：1 May, 2012
• 卷：189-190
• 期：Complete
• 页码：213-221
• 文件大小：1375 K

摘要

A super-critical water oxidation (SCWO) process has been developed to effectively reduce the quantities of waste ion exchange resins from the pressurized water reactors (PWR) in Korea. First of all, waste ion exchange resins were separated into cationic and anionic resins by a specific gravity difference in the fluidized bed. The separated resins were wet pulverized in a ball mill for 24 h to make uniformly dispersed slurry in high concentration. The optimal decomposition conditions for waste cationic and anionic resins from thermal power plants were obtained in a bench-scale facility of reactor of 220 mL volume. Then scale-up experiments were performed in a pilot plant with a 24 L reactor. The optimal values of such parameters as process temperature, process pressure, residence time, amount of oxidant, and amount of additives (NaOH and CH₃NO₂) for decomposition were determined by the pilot plant. The optimal process condition on cationic ion exchange was found under the sub-critical condition. The process temperature for anionic ion exchange resins was lowered to 515 掳C. By using nitromethane as a denitrification agent, total-nitrogen (T-N) in the treated water was lowered as well as almost no NO_x was emitted from the exhausted gases. Based on the production rate and the stored amount of waste resins in the nuclear power plant 鈥淎鈥? a commercial facility with process capacity of 150 kg/h was designed in detail. In this paper, we present the procedure to scale-up from a bench-scale facility to a commercial plant and major check points in each stage.