Temporal stability of shallow soil water content for three adjacent transects on a hillslope

详细信息	查看全文 | 推荐本文 |

• 作者：Lei Gao^a ; ^c ; Mingan Shao^b ; ^{shaoma@igsnrr.ac.cn}
• 关键词：Soil water content ; Temporal stability ; Representative locations ; Soil properties
• 刊名：Agricultural Water Management
• 出版年：2012
• 期刊代码：5_03783774
• 类别：abs
• 出版时间：July, 2012
• 卷：110
• 期：Complete
• 页码：41-54
• 文件大小：977 K

摘要

Identifying representative locations that estimate mean soil water content (SWC) for an area of interest is one of the most important applications of the concept of temporal stability but typically requires extensive sampling on multiple occasions. This study aimed to examine the feasibility of identifying temporally stable locations by using other properties (mainly soil) that were themselves relatively temporally stable, thus reducing the cost of sampling. From July 2008 to October 2010, SWCs at four soil depths (0.1, 0.2, 0.4 and 0.6 m) were measured using a neutron probe on 20 occasions, along three transects (鈭?0 locations for each transect) on a hillslope of the Loess Plateau, China. Summary variables were determined at corresponding locations. The results showed good temporal patterns, with mean Spearman correlation coefficients ranging from 0.63 to 0.83 for the three transects at four soil depths. Identified representative locations for the three transects well-represented the mean SWC, with a root mean square error of less than 2%and a mean error of less than 1%. Elevation and clay content of soil were the main factors affecting the spatial and temporal distribution of soil water at the hillslope scale. However, the characteristics of temporal stability differed in part among the three transects, both in temporal persistence and in the number of representative locations. Multiple linear regression equations, determined between the mean relative difference and the measured variables based on the datasets of transects 1 and 2, did not accurately predict temporally stable locations for transect 3. The a priori selection of representative locations based solely on properties of soil and elevation was determined to be infeasible at the present time.