A design model for fibre reinforced concrete beams pre-stressed with steel and FRP bars
- 作者：Joaquim A.O. Barros ; barros@civil.uminho.pt ; Mahsa Taheri taheri@civil.uminho.pt ; Hamidreza Salehian salehian@civil.uminho.pt ; Pedro J.D. Mendes pmendes@civil.uminho.pt
- 关键词：Fibre reinforced concrete ; Strain hardening ; Strain softening ; Flexural reinforcement ; Pre-stressed steel bars ; Pre-stressed FRP bars
- 刊名：Composite Structures
- 出版年：2012
- 期刊代码：15_02638223
- 类别：ms
- 出版时间：July, 2012
- 卷：94
- 期：8
- 页码：2494-2512
- 文件大小：2557 K
摘要
This paper presents a design oriented model to determine the moment-curvature relationship of elements of rectangular cross section failing in bending, made by strain softening or strain hardening fibre reinforced concrete (FRC) and reinforced with perfectly bonded pre-stressed steel and fibre reinforced polymeric (FRP) bars. Since FRP bars are not affected by corrosion, they have the minimum FRC cover thickness that guaranty proper bond conditions, while steel bars are positioned with a thicker FRC cover to increase their protection against corrosion. Using the moment-curvature relationship predicted by the model in an algorithm based on the virtual work method, a numerical strategy is adopted to evaluate the load-deflection response of statically determinate beams. The predictive performance of the proposed formulation is assessed by simulating the response of available experimental results. By using this model, a parametric study is carried out in order to evaluate the influence of the main parameters that characterize the post cracking behaviour of FRC, and the pre-stress level applied to FRP and steel bars, on the moment-curvature and load-deflection responses of this type of structural elements. Finally the shear resistance of this structural system is predicted.