Synthesis and characterization of copper zinc tin chalcogenide nanoparticles: Influence of reactants on the chemical composition
详细信息查看全文 | 推荐本文 |
摘要
Nanoparticles of copper zinc tin sulfide (CZTS, Cu2ZnSnS4) and copper zinc tin selenide (CZTSe, Cu2ZnSnSe4) were prepared by a synthesis route using corresponding metal salts and sulfur or selenium. Oleylamine was used as solvent and capping agent. This fast and uncomplicated preparation method delivers amine-capped nanoparticles with a diameter of approximately 7-35 nm depending on the reaction conditions, whereas CZTSe nanoparticles are bigger than similarly synthesized CZTS nanoparticles. The nanoparticles are characterized by powder-X-ray diffraction, mass spectrometry, transmission electron microscopy, high resolution transmission electron microscopy, electron diffraction and energy dispersive X-ray spectroscopy. For CZTS the chemical composition - proven by energy dispersive X-ray spectroscopy - is in good accordance with the stoichiometric chemical composition, while in the case of CZTSe the chemical composition depends strongly on the metal salts used for the synthesis. A composition close to the stoichiometric one was achieved by selecting metal salts with appropriate reactivity. Transmission electron microscopy images, as well as high resolution transmission electron microscopy images, reveal perfect crystals for the CZTS sample, in the CZTSe samples defects in the crystal structure are observed.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700