Mine water treatment with limestone for sulfate removal

详细信息	查看全文 | 推荐本文 |

• 作者：Adarlê ; ne M. Silva ^{adarlenems@gmail.com} ; Rosa M.F. Lima ; Versiane A. Leã ; o ; ^{versiane@demet.em.ufop.br} ; ^{versiane.ufop@gmail.com} ; ^{va.leao@uol.com.br}
• 关键词：Sulfate ; Mine water ; Limestone ; Sorption ; Fixed-bed models ; Thomas model
• 刊名：Journal of Hazardous Materials
• 出版年：2012
• 期刊代码：50_03043894
• 类别：ce
• 出版时间：30 June, 2012
• 卷：221-222
• 期：Complete
• 页码：45-55
• 文件大小：1108 K

摘要

Limestone can be an option for sulfate sorption, particularly from neutral mine drainages because calcium ions on the solid surface can bind sulfate ions. This work investigated sulfate removal from mine waters through sorption on limestone. Continuous stirred-tank experiments reduced the sulfate concentration from 588.0 mg/L to 87.0 mg/L at a 210-min residence time. Batch equilibrium tests showed that sulfate loading on limestone can be described by the Langmuir isotherm, with a maximum loading of 23.7 mg/g. Fixed-bed experiments were utilized to produce breakthrough curves at different bed depths. The Bed Depth Service Time (BDST) model was applied, and it indicated sulfate loadings of up to 20.0 g SO₄^{2鈭?/sup>/L-bed as the flow rate increased from 1 to 10 mL/min. Thomas, Yoon-Nelson and dose-response models, predicted a maximum particle loading of 19 mg/g. Infrared spectrometry indicated the presence of sulfate ions on the limestone surface. Sulfate sorption on limestone seems to be an alternative to treating mine waters with sulfate concentrations below the 1200-2000 mg/L range, where lime precipitation is not effective. In addition, this approach does not require alkaline pH values, as in the ettringite process.}