Fatigue crack growth behavior of Sn–Pb and Sn-based lead-free solders
详细信息查看全文 | 推荐本文 |
摘要
Solder alloys of lead-rich composition have been commonly used as joining materials in electronic package. However, because of environmental concerns, lead-free solders will replace lead-rich solders more and more in the future. The fatigue characteristics of the solders used are most important in assessing the reliability of joints in electronic packaging. In the present study, the fatigue crack growth (FCG) behavior of a wide variety of solders of both lead-rich and lead-free types has been investigated under a range of mean stresses and frequencies. Both time dependent and time independent (cyclic dependent) behaviors were observed. In the cyclic dependent crack growth regime, the FCG rates could be expressed as a function of either ΔKeff or ΔJ. Further, the lead-free solders were found to have a higher resistance to FCG than did the lead-rich solders. In the time dependent crack growth regime, the FCG rates were found to be a function of C*. The point of transition between time dependent and time independent behavior was found to depend on the homologous temperature and strength of the alloys.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700