Braided reinforced composite rods for the internal reinforcement of concrete
| 详细信息 | 推荐本文 | |
- 作者：C. Gonilho Pereira ; R. Fangueiro ; S. Jalali ; M. Araujo and P. Marques
- 关键词：concrete ; fibre ; reinforced composite material ; core ; reinforced braided fabric ; braided reinforced composite rod
- 刊名：Mechanics of Composite Materials
- 出版时间：May, 2008
- 出版年：2008
- 期刊代码：50_01915665
- 类别：ch
- 卷：44
- 期：3
- 页码：221-230
- 数据来源：sp
摘要
This paper reports on the development of braided reinforced composite rods as a substitute for the steel reinforcement in concrete. The research work aims at understanding the mechanical behaviour of core-reinforced braided fabrics and braided reinforced composite rods, namely concerning the influence of the braiding angle, the type of core reinforcement fibre, and preloading and postloading conditions. The core-reinforced braided fabrics were made from polyester fibres for producing braided structures, and E-glass, carbon, HT polyethylene, and sisal fibres were used for the core reinforcement. The braided reinforced composite rods were obtained by impregnating the core-reinforced braided fabric with a vinyl ester resin. The preloading of the core-reinforced braided fabrics and the postloading of the braided reinforced composite rods were performed in three and two stages, respectively. The results of tensile tests carried out on different samples of core-reinforced braided fabrics are presented and discussed. The tensile and bending properties of the braided reinforced composite rods have been evaluated, and the results obtained are presented, discussed, and compared with those of conventional materials, such as steel.