Improved DAE formulation for inverse dynamics simulation of cranes
| 详细信息 | 推荐本文 | |
- 作者：Wojciech Blajer (1) w.blajer@pr.radom.pl
Krzysztof Ko艂odziejczyk (1) - 关键词：Inverse dynamics – ; Underactuated systems – ; Crane dynamics and control
- 刊名：Multibody System Dynamics
- 出版时间：February 2011
- 出版年：2011
- 期刊代码：89_13845640
- 类别：med
- 卷：25
- 期：2
- 页码：131-143
- 数据来源：sp
摘要
Cranes are underactuated systems with less control inputs than degrees of freedom. Dynamics and control of such systems is a challenging task, and the existence of solution to the inverse dynamics simulation problem in which an r-degree-of-freedom system with m actuators, m<r, is subject to m specified motion task (servo-constraints) is conditioned upon the system is differentially flat (all the system states and control inputs can be algebraically expressed in terms of the outputs and their time derivatives up to a certain order). The outputs are often designed as specified in time load coordinates to model a rest-to-rest maneuver along a trajectory in the working space, from the initial load position to its desired destination. The flatness-based methodology results then in the required control inputs determined in terms of the fourth time derivatives of the imposed outputs, and the derivations are featured by substantial complexity. The DAE formulation motivated in this contribution offers a more convenient approach to the prediction of dynamics and control of cranes executing prescribed load motions, and only the second time derivatives of the specified outputs are involved. While most of the inverse simulation formulations, both flatness-based and DAE ones, are performed using independent state variables, the use of dependent coordinates and velocities may lead to substantial modeling simplifications and gains in computational efficiency. An improved DAE formulation of this type is presented in this paper.