Analysis of dynamic stability in a turning process based on a 2-DOFs model with overlap factor
| 详细信息 | 推荐本文 | |
- 作者：Laixi Zhang (1)
Xingsong Wang (1) xswang@seu.edu.cn
Shulin Liu (1) - 关键词：Chatter – ; Regenerative – ; 2 ; DOFs model – ; Overlap factor – ; Stability analysis
- 刊名：Journal of Mechanical Science and Technology
- 出版时间：June 2012
- 出版年：2012
- 期刊代码：108_1976-3824
- 类别：et
- 卷：26
- 期：6
- 页码：1891-1899
- 数据来源：sp
摘要
A novel 2-DOFs dynamic turning model including the compliance of workpiece and cutting tool is developed. In past studies, most of them were based on SDOF models and either the workpiece or tool was simplified as rigid one. Meanwhile, traditional regenerative chatter models focus mainly on cross cutting which was particularly prone to chatter. It is evident that such models cannot describe cutting system comprehensively. In order to tackle this problem, we introduce the overlap factor to make the novel model also suitable for length-wise cutting. Stability was analyzed after performing the Laplace transformation, correlation between critical chip width and spindle speed was derived. Simulation suggests that the new model has a larger critical chip width which complies with practical situation.