摘要
液压多级缸在换级时,易产生较大的液压冲击,为保证举升系统的稳定性,同时获得举升过程的快速性,在分级规划时,首先,提出采用加速和减速阶段比例为3:7的三种非对称组合正弦函数来拟合起竖臂的位姿变化规律,并建立轨迹规划模型,然后运用模式搜索法求解最优时间,仿真得到多级液压缸的运行轨迹和负载冲击情况。最后通过仿真结果对比,表明提出的轨迹规划方法是有效的,且不同分段的非对称组合正弦函数对于举升系统有明显的影响。
The great hydraulic impact was caused by stage change of hydraulic multistage cylinder. In order toensure the stability of the lifting system and obtain the rapid of the lifting process,firstly,three kinds of the asymmetry combined sine function,whose ratio of acceleration to deceleration was 3 to 7,were proposed to fit the posture variety regulationof the erecting arm in stage planning. And the trajectory planning was established. Then pattern search was given to solve the optimal time and running track and load impact ofthemultistage hydraulic cylinder were gained by simulation. Finally,by comparing with the simulation result,it was proved that the trajectory planning method was feasible,and different section of the asymmetric combined sine function hadanobvious impact on the lifting system.
引文
[1]黄浦,李红民.防空导弹垂直发射技术的现状及趋势[J].价值工程,2011,30(6):22-24.(Huang Pu,Li Hong-min.Status and trend of airbornesurfacetoair missile vertical-launched technology[J].Value Engineering,2011,30(6):22-24.)
[2]高钦和,黄先祥,王孙安.含多级油缸的液压举升系统智能PID控制研究[J].中国机械工程,2007,18(6):662-665.(Gao Qin-he,Huang Xian-xiang,Wang Sun-an.Study on intelligent PID of hydraulically driven lift system with multistage hydraulic cylinder[J].China Mechanical Engineering,2007,18(6):662-665.)
[3]李伟光,许阳钊.搬运机器人的轨迹规划[J].组合机床与自动化加工技术,2010(5):83-85.(Li Wei-guang,Xu Yang-zhao.The trajectory planning of transport robot[J].Modular Machine Tool&Automatic Manufacturing Technique,2010(5):83-85.)
[4]薄纯青,段建中.通过坐标变换建立多关节机器人一般位形方程的方法[J].机械工程师,2015(8):34-36.(Bo Chun-qing,Duan Jian-zhong.Establishment of general configuration equations for multi-joint robot based oncoordinate transformation method[J].Mechanical Engineer,2015(8):34-36.)
[5]张斌,方强,柯映林.大型刚体调姿系统最优时间轨迹规划[J].机械工程学报,2008,44(8):248-252.(Zhang Bin,Fang Qiang,Ke Ying-lin.Optimal time trajectory planning method for a kind of posturealigning system of large rigid bodies[J].Journal of Mechanical Engineering,2008,44(8):248-252.)
[6]朱海燕.七自由度仿人机械臂轨迹规划与控制方法研究[D].杭州:浙江工业大学,2012.(Zhu Hai-yan.Research of 7DOF humanoid manipulators′s trajectory planning and control[D].Hangzhou:Zhejiang University of Technology,2012.)