摘要
提出基于链表法的配电网故障定位方法,主要依靠安装在线路上的故障指示器检测到短路或接地故障,并形成故障函数信息,通过链表法来建立网络拓扑结构,把网络进行区域划分和树枝划分,并且充分考虑了漏报、误报等机制,通过一次定位、二次定位来判断故障位置.该方法可以同时针对短路故障、接地故障进行定位,考虑了时间延时等容错机制问题,克服了因通信延时影响故障定位准确性的问题,分析了多电源或单电源多出线问题,并给出了解决方法,具备原理简单、复杂度低等特点,可以解决多重故障判定,具有良好的容错性和实用性.
Fault location of distribution network based on chain table algorithm is presented in this paper. The fault indicator installed on the electric wire can detect the shout-circuit fault and ground fault, and form the fault information. The topological graph is built by chain table algorithm, and translated into the regional division & branch division. With the condition of time delay, false negatives and false positives, the fault point is located via first location and second location. The method is simple and can solve the problem of multiple faults and owns fault tolerance and effective practicability.
引文
[1] 胡福年, 孙守娟, 林宗浩. 一种改进的馈线终端设计[J]. 自动化仪表, 2014, 35(8):35-39.
[2] 罗梅, 杨洪耕. 配电网故障定位的一种改进通用矩阵算法[J]. 电力系统保护与控制, 2012, 40(5):64-68.
[3] 谢章洪, 黄炜宏, 陈祥伟, 等. 一种配电网故障定位的实用矩阵算法[J]. 配网规划与设计, 2013, 30(3):51-55.
[4] 孔永超, 董张卓, 李养俊. 基于馈线终端单元的馈线故障定位矩阵算法研究[J]. 科学技术与工程, 2014, 14(6):159-163.
[5] 蒋秀洁, 熊信银, 吴耀武, 等. 改进矩阵算法及其在配电网故障定位中的应用[J]. 电网技术, 2004, 28(19):60-63.
[6] 梅念, 石东源, 杨增力, 等. 一种实用的复杂配电网故障定位的矩阵算法[J]. 电力系统自动化, 2007, 31(10):66-70.
[7] 王飞, 孙莹. 配电网故障定位的改进矩阵算法[J]. 电力系统自动化, 2003, 27(24):45-49.
[8] 刘会家, 王峥, 陈玮. 配电网故障定位统一矩阵算法的改进[J]. 三峡大学学报(自然科学版), 2002, 24(1):308-310.
[9] 杨俊起, 陈滟涛, 杨凌霄, 等. 配电网故障定位的改进矩阵算法研究[J]. 高电压技术, 2007, 33(5):135-138.
[10] 胡福年, 孙守娟. 基于图论的矩阵算法在配电网故障定位中的应用[J]. 中国电力, 2016, 49(3):94-98.
[11] 张新峰, 吕飞鹏, 吕文超等. 基于链表法的复杂配电网单相接地故障在线定位[J]. 电力系统保护与控制, 2012, 40(22):31-40.