高强集装箱AS700MC内裂原因分析及控制

详细信息    查看全文 | 推荐本文 |

英文篇名：Analysis on Causes Leading to Internal Cracks of AS700MC High Strength Steel for Container and Controlling Countermeasures of Cracks 作者：苏小利 ; 于海岐 ; 吕志勇 ; 邢维义 ; 殷东明 ; 刘文飞 英文作者：Su Xiaoli;Yu Haiqi;Lv Zhiyong;Xing Weiyi;Yin Dongming;Liu Wenfei;Bayuquan Branch of Angang Steel Co., Ltd.; 关键词：高强集装箱 ; 内部裂纹 ; 中心偏析 英文关键词：high strength container;;internal crack;;center segregation 中文刊名：AGJS 英文刊名：Angang Technology 机构：鞍钢股份有限公司鲅鱼圈钢铁分公司; 出版日期：2018-02-15 出版单位：鞍钢技术 年：2018 期：No.409 语种：中文; 页：AGJS201801017 页数：4 CN：01 ISSN：21-1105/TF 分类号：60-63

摘要

针对鞍钢股份有限公司鲅鱼圈钢铁分公司生产高强集装箱用AS700MC时出现严重内裂纹现象,采取了改进LF脱硫工艺、降低中间包过热度、提高铸机拉速等措施。结果表明,AS700MC内裂问题得到一定程度的缓解,中间裂纹由原来的2.0降低到了1.0以下,中心偏析由原来的B1.0降低到B0.5。
        For the problem of severe crack occurred in the AS700 MC high strength container produced by Bayuquan Branch of Angang Steel Co., Ltd., such countermeasures as improving the desulfurization process by LF, increasing the casting speed of a casting machine and reducing the degree of superheat caused by tundish were taken. The production results showed that the problem of emerging cracks was alleviated in some extent, being reflected in that the level of the in-between cracks was reduced to less than Level 1.0 from Level 2.0 and the level of center segregations was reduced to Level B0.5 from Level B1.0.

引文

[1]曲鹏.本钢Frsc机组700MPa级高强度集装箱用钢的研制[J].物理测试,2009,27(3):10-13.
    [2]于赋志,殷浩.高强集装箱用钢AS700MC连铸坯中间裂纹分析与控制[J].中国冶金,2012,22(1):155-158.