内转式进气道与飞行器前体的一体化设计综述
|
摘要
飞行器前体/高超声速内转式进气道的一体化设计已经成为吸气式高超声速推进系统研究的一个热点。从气动设计角度分析了高超声速内转式进气道及其与飞行器前体的一体化设计方法。内转式进气道的设计方法主要包括直接流线追踪方法、基于均匀来流的吻切流设计方法和基于前体非均匀来流的内转式进气道设计方法。基于内转式进气道的一体化设计主要包括正对来流的独立进气方式以及利用前体预压缩进气方式两类,结合内转式进气道的设计方法对这两者进行了深入分析。根据分析,基于均匀来流条件的内转式进气道的设计方法得到了深入发展,但还有必要进一步发展非均匀来流条件下的设计方法以提升一体化设计的灵活性;此外,随着内转式进气道设计方法的深入发展,一体化设计也将得到进一步发展。
The integrated design of aircraft forebody/hypersonic inward-turning inlet has become a hot spot in the research of airbreathing hypersonic propulsion system.This paper mainly analyzes the design method of hypersonic inward-turning inlet and its integration with aircraft forebody from the perspective of aerodynamic design.For the design method of the inwardturning inlet,it mainly includes direct streamline-tracing method,the osculating method with uniform incoming flow and the inverse design method based on the forebody non-uniform flowfield.The integrated design method based on the inward-turning inlet mainly includes two types:the independent intake mode facing the incoming flow and the pre-compression intake mode with the forebody.Combined with the design method of the inward-turning inlet,the design methods of these two types are analyzed in details.According to the analysis,the design method of the inward-turning inlet based on the uniform forebody flow-field has been further developed,but it is necessary to develop the design method under non-uniform incoming flow to enhance the flexibility of the integrated design.With the in-depth development of the inward-turning inlet design method,the integrated design method is bound to be further developed.
The integrated design of aircraft forebody/hypersonic inward-turning inlet has become a hot spot in the research of airbreathing hypersonic propulsion system.This paper mainly analyzes the design method of hypersonic inward-turning inlet and its integration with aircraft forebody from the perspective of aerodynamic design.For the design method of the inwardturning inlet,it mainly includes direct streamline-tracing method,the osculating method with uniform incoming flow and the inverse design method based on the forebody non-uniform flowfield.The integrated design method based on the inward-turning inlet mainly includes two types:the independent intake mode facing the incoming flow and the pre-compression intake mode with the forebody.Combined with the design method of the inward-turning inlet,the design methods of these two types are analyzed in details.According to the analysis,the design method of the inward-turning inlet based on the uniform forebody flow-field has been further developed,but it is necessary to develop the design method under non-uniform incoming flow to enhance the flexibility of the integrated design.With the in-depth development of the inward-turning inlet design method,the integrated design method is bound to be further developed.
引文
[1]Haney J W,Beaulieu W B.Waverider inlet integration issues[R].AIAA-1994-0383,1994.
[2]Heiser W H,Pratt D T,Daniel H D,et al.Hypersonic airbreathing propulsion[M].Washington D C:American Institute of Aeronautics and Astronautics Inc,1994.
[3]Javaid K H,Serghides V C.Airframe-propulsion integration methodology for waverider-derived hypersonic cruise aircraft design concepts[R].AIAA-2004-1201,2004.
[4]Andrews E,Mackley E.Review of NASA’s hypersonic research engine project[R].AIAA-93-2323,1993.
[5]吴颖川,贺元元,贺伟,等.吸气式高超声速飞行器机体推进一体化技术研究进展[J].航空学报,2015,36(1):245-260.Wu Y C,He Y Y,He W,et al.Progress in airframepropulsion integration technology of air-breathing hypersonic vehicle[J].Acta Aeronautica et Astronautica Sinica,2015,36(1):245-260.
[6]向先宏,钱战森.高超声速飞行器机体/推进气动布局一体化设计技术研究现状[J].航空科学技术,2015,10:44-52.Xiang X H,Qian Z S.An overview and development analysis of hypersonic airframe/propulsion integrative design technology[J].Aeronautical Science and Technology,2015,10:44-52.
[7]尤延铖,梁德旺,郭荣伟,等.高超声速三维内收缩式进气道/乘波前体一体化设计研究评述[J].力学进展,2009,39(5):513-525.You Y C,Liang D W,Guo R W,et al.Overview of the integration of three-dimensional inward turning hypersonic inlet and waverider forebody[J].Advances in Mechanics,2009,39(5):513-525.
[8]王江峰,王旭东,李佳伟,等.高超声速巡航飞行器乘波布局气动设计综述[J].空气动力学学报,2018,36(5):705-728.Wang J F,Wang X D,Li J W,et al.Overview on aerodynamic design of cruising waverider configuration for hypersonic vehicles[J].Acta Aerodynamica Sinica,2018,36(5):705-728.
[9]Ding F,Liu J,Shen C B,et al.An overview of research on waverider design methodology[J].Acta Astronautica,2017,140:190-205.
[10]Ding F,Liu J,Shen C B,et al.An overview of waverider design concept in airframe/inlet integration methodology for airbreathing hypersonic vehicles[J].Acta Astronautica,2018,152:639-656.
[11]丁峰,柳军,沈赤兵,等.乘波概念应用于吸气式高超声速飞行器机体/进气道一体化设计方法研究综述[J].实验流体力学,2018,32(6):16-26.Ding F,Liu J,Shen C B,et al.An overview of waverider design concept in airframe-inlet integration methodology for airbreathing hypersonic vehicles[J].Journal of Experiments in Fluid Mechanics,2018,32(6):16-26.
[12]Billig F S,Jacobsen L S.Comparison of planar and axisymmetric flowpaths for hydrogen fueled space access vehicles[R].AIAA-2003-4407,2003.
[13]Zanchetta M,Cain T.An axisymmetric internal compression inlet[R].AIAA-1998-1525,1998.
[14]Goldfeld M A,Nestoulia R V.Numerical and experimental studies of 3Dhypersonic inlet[R].AIAA-2003-14,2003.
[15]Barkmeyer D E F,Starkey R P,Lewis M J.Inverse waverider design for inward turning inlets[R].AIAA-2005-3915,2005.
[16]Smart M K.Design of three-dimensional hypersonic inlets with rectangular to elliptical shape transition[J].Journal of Propulsion and Power,1999,15(3):408-416.
[17]Smart M K,White J A.Computational investigation of the performance and back-pressure limits of a hypersonic inlet[R].AIAA-2002-508,2002.
[18]Smart M K,Trexler C A.Mach 4performance of hypersonic inlet with rectangular-to-elliptical shape transition[J].Journal of Propulsion and Power,2004,20(2):288-293.
[19]尤延铖.三维内乘波式高超声速进气道设计方法与流动特征研究[D].南京:南京航空航天大学,2008.You Y C.Designing concept and flow characteristic research of internal waverider hypersonic inlet[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2008.
[20]南向军.压升规律可控的高超声速内收缩进气道设计方法研究[D].南京:南京航空航天大学,2012.Nan X J.Investigation on design methodology of hypersonic inward turning inlets with controlled pressure rise law[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2012.
[21]李永洲.马赫数分布可控的高超声速内收缩进气道及其一体化设计研究[D].南京:南京航空航天大学,2014.Li Y Z.Investigation of hypersonic inward turning inlet with controlled Mach number distribution and its integrated design[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2014.
[22]Busemann A.Die achsensymmetrische kegeligeüberschallstr9mung[J].Luftfahrtforschung,1942,19(4):137-144.
[23]Dsouza N,M9elder S.Applicability of hypersonic smalldisturbance theory and similitude to internal hypersonic conical flows[J].Journal of Spacecraft and Rockets,1970,7(2):149-154.
[24]Billig F S,Baurle R A,Tam C J,et al.Design and analysis of streamline traced hypersonic inlets[R].AIAA-1999-4974,1999.
[25]Jacobsen L S,Tam C J,Behdadnia R,et al.Starting and operation of a streamline-traced Busemann inlet at Mach 4[R].AIAA-2006-4508,2006.
[26]Flock A K,Guelhan A.Viscous effects and truncation effects in axisymmetric Busemann scramjet intakes[J].AIAA Journal,2016,54(6):1-11.
[27]Walker S H,Rodgers F C,Esposita A L.Hypersonic collaborative Australia/United States experiment(Hycause)[R].AIAA-2005-3254,2005.
[28]孙波,张堃元,王成鹏,等.Busemann进气道无粘流场数值分析[J].推进技术,2005,26(3):242-247.Sun B,Zhang K Y,Wang C P,et al.Inviscid CFD analysis of hypersonic Busemann inlet[J]Journal of Propulsion Technology,2005,26(3):242-247.
[29]孙波,张堃元.Busemann进气道起动问题初步研究[J].推进技术,2006,27(2):128-131.Sun B,Zhang K Y.Prenminary investigation on Busemann inlet starting characteristics[J].Journal of Propulsion Technology,2006,27(2):128-131.
[30]郭军亮,黄国平,尤延铖,等.改善内乘波式进气道出口均匀性的内收缩基本流场研究[J].宇航学报,2009,30(5):1934-1940,1952.Guo J L,Huang G P,You Y C,et al.Study of internal compression flowfield for improving the outflow uniformity of internal waverider inlet[J].Journal of Astronautics,2009,30(5):1934-1940,1952.
[31]O’Brien T F,Colville J R.Blunt leading edge effects on inviscid truncated Busemann inlet performance[R].AIAA-2007-5411,2007.
[32]O’Brien T F,Colville J R.Analytical computation of leadingedge truncation effects on inviscid Busemann-inlet performance[J].Journal of Propulsion and Power,2008,24(4):655-661.
[33]Ramasubramanian V,Lewis M,Starkey R.Performance of various truncation strategies employed on hypersonic Busemann inlets[R].AIAA-2009-7249,2009.
[34]黄慧慧,黄国平,俞宗汉,等.高外压缩比的高超声速内乘波进气道设计[J].工程热物理学报,2015,36(6):1233-1237.Huang H H,Huang G P,Yu Z H,et al.The design of internal waverider hypersonic inlet with high ratio of external compression[J].Journal of Engineering Thermophysics,2015,36(6):1233-1237.
[35]Matthews A J,Jones T V.Design and test of a modular waverider hypersonic intake[J].Journal of propulsion and power,2006,22(4):913-920.
[36]李永洲,张堃元,钟启涛,等.变中心体新型轴对称基准流场研究[C].第四届冲压发动机技术交流会,北京,2013.
[37]王卫星,顾强,郭荣伟.内转式进气道流动控制研究[J].推进技术,2017,38(5):961-967.Wang W X,Gu Q,Guo R W.Srudy of flow control of inward turning inlet[J].Journal of Propulsion Technology,2017,38(5):961-967.
[38]Malo-Molina F J,Gaitonde D V,Kutschenreuter P H.Numerical investigation of an innovative inward turning inlet[R].AIAA-2005-4871,2005.
[39]Malo-Molina F J,Gaitonde D V,Ebrahimi H B,et al.Analysis of an innovative inward turning inlet using an air-JP8combustion mixture at Mach 7[R].AIAA-2006-3041,2006.
[40]董昊.高超声速咽式进气道流场特性和设计方法研究[D].南京:南京航空航天大学,2010.Dong H.Investigation of flowfield characteristics and design methodology of hypersonic Jaws inlet[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2010.
[41]辜天来,张帅,郑耀.咽式进气道/等直隔离段的反压特性[J].浙江大学学报(工学版),2016,50(7):1418-1424.Gu T L,Zhang S,Zheng Y.Back pressure characteristics of jaws inlet with constant-area isolator[J].Journal of Zhejiang University(Engineering Science),2016,50(7):1418-1424.
[42]辜天来,付磊,张帅,等.咽式进气道设计工况下性能初步分析[J].航空动力学报,2014,29(9):2070-2078.Gu T L,Fu L,Zhang S,et al.Preliminary analysis of jaws inlet performance under design conditions[J].Journal of Aerospace Power,2014,29(9):2070-2078.
[43]Malo-Molina F J,Gaitonde D V,Ebrahimi H B.Three dimensional analysis of a fully coupled hypersonic air-breathing inlet-combustor flowpath[R].AIAA-2010-412,2010.
[44]Malo-Molina F J,Gaitonde D,Ebrahimi H B,et al.Threedimensional analysis of a supersonic combustor coupled to innovative inward-turning inlets[J].AIAA Journal,2010,48(3):572-582.
[45]方兴军.控制出口速度分布的超声速内流通道反设计[D].南京:南京航空航天大学,2011.Fang X J.Inverse design of supersonic internal flow path based on given outflow velocity profile[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2011.
[46]刘燚.控制出口马赫数分布的高超声速压缩通道反设计[D].南京:南京航空航天大学,2012.Liu Y.Inverse design of hypersonic air compression tube for generating desirable Mach profile[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2012.
[47]韩伟强,朱呈祥,尤延铖,等.给定下游边界的超声速流场逆向求解方法[J].推进技术,2016,37(4):624-631.Han W Q,Zhu C X,You Y C,et al.An inverse method for supersonic flowfield with given downstream boundary[J].Journal of Propulsion Technology,2016,37(4):624-631.
[48]卫锋,贺旭照,贺元元,等.三维内转式进气道双激波基准流场的设计方法[J].推进技术,2015,36(3):358-364.Wei F,He X Z,He Y Y,et al.Design method of dual-shock wave basic flow-field for inward turning inlet[J].Journal of Propulsion Technology,2015,36(3):358-364.
[49]何家祥,金东海.基于Busemann压升规律的可控消波内转基准流场设计[J].航空动力学报,2017,32(5):1168-1175.He J X,Jin D H.Busemann pressure rise distribution based design of inward turning basic flowfield with controlled and cancelled shock waves[J].Journal of Aerospace Power,2017,32(5):1168-1175.
[50]乔文友,余安远,黎崎.控制出口截面速度方向的内转式进气道设计方法研究[C].航天三网第38届技术交流会暨第二届空天动力联合会议,大连,2017.
[51]乔文友,黄国平,夏晨,等.发展用于高速飞行器前体/进气道匹配设计的逆特征线法[J].航空动力学报,2014,29(6):1444-1452.Qiao W Y,Huang G P,Xia C,et al.Development of inverse characteristic method for matching design of high-speed aircraft forebody/inlet[J].Journal of Aerospace Power,2014,29(6):1444-1452.
[52]谭慧俊,黄河峡,卜焕先,等.一种高超声速内转式进气道的内通道设计方法:CN105205220A[P].2015-12-30.
[53]Sobieczky H,Dougherty F C,Jones K.Hypersonic waverider design from given shock waves[C].The 1st International Hypersonic Waverider Symposium,University of Maryland,USA,1990.
[54]Xiao Y B,Yue L J,Chenr L H,et.al.Iso-contraction-ratio methodology for the design of hypersonic inward turning inlets with shape transition[R].AIAA-2012-5978,2012.
[55]尤延铖,黄国平,郭军亮,等.基于任意激波形状的内乘波式高超声速进气道:ZL200820159849.3[P].2009-09-02.
[56]肖雅彬,岳连捷,卢洪波,等.局部收缩比一致的变截面高超声速内转式进气道:ZL201210157992.X[P].2014-06-13.
[57]乔文友.可排除前体低能量的高超声速三维内收缩式进气道研究[D].南京:南京航空航天大学,2015.Qiao W Y.Design and investigation of a novel hypersonic threedimensional inward turning inlet for removing forebody low kinetic flow[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2015.
[58]Jones K D.A new inverse method for generating high-speed aerodynamic flows with application to waverider design[D].Colorado:University of Colorado Boulder,1993.
[59]Jones K D,Center K B.Waverider design methods for nonconical shock geometries[R].AIAA-2002-3204,2002.
[60]刘小勇.超燃冲压发动机技术[J].飞航导弹,2003,2:38-42.
[61]甘文彪,阎超,耿云飞,等.乘波飞行器一体化构型设计[J].空气动力学学报,2012,30(1):68-73.Gan W B,Yan C,Geng Y F,et al.Waverider design of integrated configuration[J].Acta Aerodynamica Sinica,2012,30(1):68-73.
[62]Nonweiler T R F.Aerodynamic problems of manned space vehicles[J].Journal of the Royal Aeronautical Society,1959,63(585):521-528.
[63]Rasmussen M.Hypersonic flow[M].New York:John Wiley&Sons Inc,1994.
[64]Starkey R P,Lewis M J.Critical design issues for airbreathing hypersonic waverider missiles[J].Journal of Spacecraft and Rockets,2001,38(4):510-519.
[65]Jones J G,Moore K C,Pike J,et al.A method for designing lifting configurations for high supersonic speeds,using axisymmetric flow fields[J].Ingenieur-Archiv,1968,37(1):56-72.
[66]He X Z,Le J L,Zhou Z,et al.Osculating inward turning cone waverider/inlet(OICWI)design methods and experimental study[R].AIAA-2012-5810,2012.
[67]Lewis M J,Takashima N.Engine/airframe integration for waverider cruise vehicles[R].AIAA-1993-0507,1993.
[68]Takashima N,Lewis M J.Wedge-cone waverider configuration for engine-airframe interaction[J].Journal of Aircraft,2012,32(5):1142-1144.
[69]赵桂林,胡亮,闻洁,等.乘波构形和乘波飞行器研究综述[J].力学进展,2003,33(3):357-374.Zhao G L,Hu L,Wen J,et al.An overview of the research on waveriders and waverider-derived hypersonic vehicles[J].Advances in Mechanics,2003,33(3):357-374.
[70]希舍尔.高超声速飞行器气动热力学设计问题精选[M].北京:国防工业出版社,2013.Hirschel E H.Selected aerothermodynamic design problems of hypersonic flight vehicles[M].Beijing:National Defense Industry Press,2013.
[71]Kothari A P,Tarpley C,McLaughlin T A,et al.Hypersonic vehicle design using inward turning flow fields[R].AIAA-1996-2552,1996.
[72]Mehta U,Aftosmis M,Bowles J,et al.Skylon aerospace plane and its aerodynamics and plumes[J].Journal of Spacecraft and Rockets,2016,53(2):340-353.
[73]Elvin J D.Integrated inward turning inlets and nozzles for hypersonic air vehicles:US 2007/0187550A1[P].2007-08-16.
[74]Smith T R,Bowcutt K G.Integrated hypersonic inlet design:USA,08256706B1[P].2012-09-04.
[75]Wang J F,Cai J S,Liu C Z,et al.Aerodynamic configuration integration design of hypersonic cruise aircraft with inwardturning inlets[J].Chinese Journal of Aeronautics,2017,30(4):1349-1362.
[76]南向军,张堃元,金志光.乘波前体两侧高超声速内收缩进气道一体化设计[J].航空学报,2012,33(8):1417-1426.Nan X J,Zhang K Y,Jin Z G.Integrated design of waverider forebody and lateral hypersonic inward turning inlets[J].Acta Aeronautica et Astronautica Sinica,2012,33(8):1417-1426.
[77]向先宏.基于三维内收缩进气道的高超声速飞行器一体化概念设计[D].南京:南京航空航天大学,2011.Xiang X H.Conceptual design of an integrative hypersonic vehicle based on 3Dinward-turning inlet[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2011.
[78]向先宏,程克明,王成鹏.基于类咽式进气道的高超声速飞行器一体化设计[J].宇航学报,2012,33(1):19-26.Xiang X H,Cheng K M,Wang C P.Integrative design of airbreathing hypersonic vehicle based on sim-Jaws inlet[J].Journal of Astronautics,2012,33(1):19-26.
[79]李永洲,张堃元.基于马赫数分布可控曲面外/内锥形基准流场的前体/进气道一体化设计[J].航空学报,2015,36(1):289-301.Li Y Z,Zhang K Y.Integrated design of forebody and inlet based on external and internal conical basic flow field with controlled Mach number distribution surface[J].Acta Aeronautica et Astronautica Sinica,2015,36(1):289-301.
[80]崔凯,胡守超,李广利,等.双旁侧进气高超声速飞机概念设计与评估[J].中国科学:技术科学,2013,43(10):1085-1093.
[81]Bowcutt K G,Smith T R,Kothari A P,et al.The hypersonic space and global transportation system:a concept for routine and affordable access to space[R].AIAA-2011-2295,2011.
[82]Langener T,Steelant J,Roncioni P,et al.Preliminary performance analysis of the LAPCAT-MR2by means of noseto-tail computations[R].AIAA-2012-5872,2012.
[83]向先宏,钱战森.吸气式高超声速飞行器机体/推进一体化设计技术研究进展及分类对比分析[J].推进技术,2018,39(10):2207-2218.Xiang X H,Qian Z S.An overview and development analysis of air-breathing hypersonic airframe/propulsion integrative design technology[J].Journal of Propulsion Technology,2018,39(10):2207-2218.
[84]Starkey R P,Lewis M J.Simple analytical model for parametric studies of hypersonic waveriders[J].Journal of Spacecraft and Rockets,1999,36(4):516-523.
[85]Takashima N,Lewis M J.Waverider configurations based on non-axisymmetric flow fields for engine-airframe integration[R].AIAA-1994-0380,1994.
[86]Jones K D,Sobieczky H,Seebass A R,et al.Waverider design for generalized shock geometries[J].Journal of Spacecraft and Rockets,1995,32(6):957-963.
[87]Kontogiannis K,Taylor N,Sóbester A.Parametric geometry models for hypersonic aircraft:integrated external inlet compression[R].AIAA-2016-0915,2016.
[88]陈小庆,侯中喜,何烈堂,等.吻切锥乘波构型优化设计与分析[J].国防科技大学学报,2007,29(4):12-16.Chen X Q,Hou Z X,He L T,et al.Optimized design and analyze of osculating cone waverider[J].Journal of National University of Defense Technology,2007,29(4):12-16.
[89]王卓,钱翼稷.乘波机外形设计[J].北京航空航天大学学报,1999,25(2):180-183.Wang Z,Qian Y J.Waverider configuration design[J].Journal of Beijing University of Aeronautics and Astronautics,1999,25(2):180-183.
[90]鲍文,姚照辉.综合离心力/气动力的升力体高超声速飞行器纵向运动建模研究[J].宇航学报,2009,30(1):128-133,144.Bao W,Yao Z H.Study on longitudinal modeling for integrated centrifugal/aero force lifting-body hypersonic vehicles[J].Journal of Astronautics,2009,30(1):128-133,144.
[91]肖洪,吴丁毅,刘振侠,等.两种乘波前体/进气道一体化设计与性能研究[J].哈尔滨工业大学学报,2009,41(7):150-154.Xiao H,Wu D Y,Liu Z X,et al.Integrated design and performance research of waverider forebody/inlet[J].Journal of Harbin Institute of Technology,2009,41(7):150-154.
[92]唐硕,祝强军.吸气式高超声速飞行器动力学建模研究进展[J].力学进展,2011,41(2):187-200.Tang S,Zhu Q J.Research progresses on flight dynamic modeling of airbreathing hypersonic vehicles[J].Advances in Mechanics,2011,41(2):187-200.
[93]张杰,王发民.乘波器的参数化设计研究[J].空气动力学学报,2008,26(1):115-118.Zhang J,Wang F M.Parametric waveriders design method study[J].Acta Aerodynamica Sinica,2008,26(1):115-118.
[94]You Y C,Zhu C X,Guo J L.Dual waverider concept for the integration of hypersonic inward-turning inlet and airframe forebody[R].AIAA-2009-7421,2009.
[95]Li Y Q,An P,Pan C J,et al.Integration methodology for waverider-derived hypersonic inlet and vehicle forebody[R].AIAA-2014-3229,2014.
[96]Gollan R J,Smart M K.Design of modular shape-transition inlets for a conical hypersonic vehicle[J].Journal of Propulsion&Power,2010,29(4):1-15.
[97]李怡庆,周驯黄,朱呈祥,等.曲锥前体/三维内转进气道一体化设计与分析[J].航空动力学报,2018,33(1):87-96.Li Y Q,Zhou X H,Zhu C X,et al.Integration design and analysis for curved conical forebody and three dimensional inward turning inlet[J].Journal of Aerospace Power,2018,33(1):87-96.
[98]肖尧,崔凯,李广利,等.全乘波背部进气高超声速飞行器构型概念研究[C].第十八届全国激波与激波管学术会议,北京,2018.
[99]周扬,黄国平.匹配飞行器前体的高外压缩内乘波进气道设计[C].第十五届推进系统气动热力学专业学术交流会,杭州,2015.
[100]乔文友,余安远,杨大伟,等.基于前体激波的内转式进气道一体化设计[J].航空学报,2018,39(10):122078.Qiao W Y,Yu A Y,Yang D W,et al.Integration design of inward-turning inlets based on forebody shock wave[J].Acta Aeronautica et Astronautica Sinica,2018,39(10):122078.
[101]乔文友,余安远,唐伟员.可匹配弹体的三维内收缩式高超声速进气道设计[C].第五届冲压发动机会议,厦门,2015.
[2]Heiser W H,Pratt D T,Daniel H D,et al.Hypersonic airbreathing propulsion[M].Washington D C:American Institute of Aeronautics and Astronautics Inc,1994.
[3]Javaid K H,Serghides V C.Airframe-propulsion integration methodology for waverider-derived hypersonic cruise aircraft design concepts[R].AIAA-2004-1201,2004.
[4]Andrews E,Mackley E.Review of NASA’s hypersonic research engine project[R].AIAA-93-2323,1993.
[5]吴颖川,贺元元,贺伟,等.吸气式高超声速飞行器机体推进一体化技术研究进展[J].航空学报,2015,36(1):245-260.Wu Y C,He Y Y,He W,et al.Progress in airframepropulsion integration technology of air-breathing hypersonic vehicle[J].Acta Aeronautica et Astronautica Sinica,2015,36(1):245-260.
[6]向先宏,钱战森.高超声速飞行器机体/推进气动布局一体化设计技术研究现状[J].航空科学技术,2015,10:44-52.Xiang X H,Qian Z S.An overview and development analysis of hypersonic airframe/propulsion integrative design technology[J].Aeronautical Science and Technology,2015,10:44-52.
[7]尤延铖,梁德旺,郭荣伟,等.高超声速三维内收缩式进气道/乘波前体一体化设计研究评述[J].力学进展,2009,39(5):513-525.You Y C,Liang D W,Guo R W,et al.Overview of the integration of three-dimensional inward turning hypersonic inlet and waverider forebody[J].Advances in Mechanics,2009,39(5):513-525.
[8]王江峰,王旭东,李佳伟,等.高超声速巡航飞行器乘波布局气动设计综述[J].空气动力学学报,2018,36(5):705-728.Wang J F,Wang X D,Li J W,et al.Overview on aerodynamic design of cruising waverider configuration for hypersonic vehicles[J].Acta Aerodynamica Sinica,2018,36(5):705-728.
[9]Ding F,Liu J,Shen C B,et al.An overview of research on waverider design methodology[J].Acta Astronautica,2017,140:190-205.
[10]Ding F,Liu J,Shen C B,et al.An overview of waverider design concept in airframe/inlet integration methodology for airbreathing hypersonic vehicles[J].Acta Astronautica,2018,152:639-656.
[11]丁峰,柳军,沈赤兵,等.乘波概念应用于吸气式高超声速飞行器机体/进气道一体化设计方法研究综述[J].实验流体力学,2018,32(6):16-26.Ding F,Liu J,Shen C B,et al.An overview of waverider design concept in airframe-inlet integration methodology for airbreathing hypersonic vehicles[J].Journal of Experiments in Fluid Mechanics,2018,32(6):16-26.
[12]Billig F S,Jacobsen L S.Comparison of planar and axisymmetric flowpaths for hydrogen fueled space access vehicles[R].AIAA-2003-4407,2003.
[13]Zanchetta M,Cain T.An axisymmetric internal compression inlet[R].AIAA-1998-1525,1998.
[14]Goldfeld M A,Nestoulia R V.Numerical and experimental studies of 3Dhypersonic inlet[R].AIAA-2003-14,2003.
[15]Barkmeyer D E F,Starkey R P,Lewis M J.Inverse waverider design for inward turning inlets[R].AIAA-2005-3915,2005.
[16]Smart M K.Design of three-dimensional hypersonic inlets with rectangular to elliptical shape transition[J].Journal of Propulsion and Power,1999,15(3):408-416.
[17]Smart M K,White J A.Computational investigation of the performance and back-pressure limits of a hypersonic inlet[R].AIAA-2002-508,2002.
[18]Smart M K,Trexler C A.Mach 4performance of hypersonic inlet with rectangular-to-elliptical shape transition[J].Journal of Propulsion and Power,2004,20(2):288-293.
[19]尤延铖.三维内乘波式高超声速进气道设计方法与流动特征研究[D].南京:南京航空航天大学,2008.You Y C.Designing concept and flow characteristic research of internal waverider hypersonic inlet[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2008.
[20]南向军.压升规律可控的高超声速内收缩进气道设计方法研究[D].南京:南京航空航天大学,2012.Nan X J.Investigation on design methodology of hypersonic inward turning inlets with controlled pressure rise law[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2012.
[21]李永洲.马赫数分布可控的高超声速内收缩进气道及其一体化设计研究[D].南京:南京航空航天大学,2014.Li Y Z.Investigation of hypersonic inward turning inlet with controlled Mach number distribution and its integrated design[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2014.
[22]Busemann A.Die achsensymmetrische kegeligeüberschallstr9mung[J].Luftfahrtforschung,1942,19(4):137-144.
[23]Dsouza N,M9elder S.Applicability of hypersonic smalldisturbance theory and similitude to internal hypersonic conical flows[J].Journal of Spacecraft and Rockets,1970,7(2):149-154.
[24]Billig F S,Baurle R A,Tam C J,et al.Design and analysis of streamline traced hypersonic inlets[R].AIAA-1999-4974,1999.
[25]Jacobsen L S,Tam C J,Behdadnia R,et al.Starting and operation of a streamline-traced Busemann inlet at Mach 4[R].AIAA-2006-4508,2006.
[26]Flock A K,Guelhan A.Viscous effects and truncation effects in axisymmetric Busemann scramjet intakes[J].AIAA Journal,2016,54(6):1-11.
[27]Walker S H,Rodgers F C,Esposita A L.Hypersonic collaborative Australia/United States experiment(Hycause)[R].AIAA-2005-3254,2005.
[28]孙波,张堃元,王成鹏,等.Busemann进气道无粘流场数值分析[J].推进技术,2005,26(3):242-247.Sun B,Zhang K Y,Wang C P,et al.Inviscid CFD analysis of hypersonic Busemann inlet[J]Journal of Propulsion Technology,2005,26(3):242-247.
[29]孙波,张堃元.Busemann进气道起动问题初步研究[J].推进技术,2006,27(2):128-131.Sun B,Zhang K Y.Prenminary investigation on Busemann inlet starting characteristics[J].Journal of Propulsion Technology,2006,27(2):128-131.
[30]郭军亮,黄国平,尤延铖,等.改善内乘波式进气道出口均匀性的内收缩基本流场研究[J].宇航学报,2009,30(5):1934-1940,1952.Guo J L,Huang G P,You Y C,et al.Study of internal compression flowfield for improving the outflow uniformity of internal waverider inlet[J].Journal of Astronautics,2009,30(5):1934-1940,1952.
[31]O’Brien T F,Colville J R.Blunt leading edge effects on inviscid truncated Busemann inlet performance[R].AIAA-2007-5411,2007.
[32]O’Brien T F,Colville J R.Analytical computation of leadingedge truncation effects on inviscid Busemann-inlet performance[J].Journal of Propulsion and Power,2008,24(4):655-661.
[33]Ramasubramanian V,Lewis M,Starkey R.Performance of various truncation strategies employed on hypersonic Busemann inlets[R].AIAA-2009-7249,2009.
[34]黄慧慧,黄国平,俞宗汉,等.高外压缩比的高超声速内乘波进气道设计[J].工程热物理学报,2015,36(6):1233-1237.Huang H H,Huang G P,Yu Z H,et al.The design of internal waverider hypersonic inlet with high ratio of external compression[J].Journal of Engineering Thermophysics,2015,36(6):1233-1237.
[35]Matthews A J,Jones T V.Design and test of a modular waverider hypersonic intake[J].Journal of propulsion and power,2006,22(4):913-920.
[36]李永洲,张堃元,钟启涛,等.变中心体新型轴对称基准流场研究[C].第四届冲压发动机技术交流会,北京,2013.
[37]王卫星,顾强,郭荣伟.内转式进气道流动控制研究[J].推进技术,2017,38(5):961-967.Wang W X,Gu Q,Guo R W.Srudy of flow control of inward turning inlet[J].Journal of Propulsion Technology,2017,38(5):961-967.
[38]Malo-Molina F J,Gaitonde D V,Kutschenreuter P H.Numerical investigation of an innovative inward turning inlet[R].AIAA-2005-4871,2005.
[39]Malo-Molina F J,Gaitonde D V,Ebrahimi H B,et al.Analysis of an innovative inward turning inlet using an air-JP8combustion mixture at Mach 7[R].AIAA-2006-3041,2006.
[40]董昊.高超声速咽式进气道流场特性和设计方法研究[D].南京:南京航空航天大学,2010.Dong H.Investigation of flowfield characteristics and design methodology of hypersonic Jaws inlet[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2010.
[41]辜天来,张帅,郑耀.咽式进气道/等直隔离段的反压特性[J].浙江大学学报(工学版),2016,50(7):1418-1424.Gu T L,Zhang S,Zheng Y.Back pressure characteristics of jaws inlet with constant-area isolator[J].Journal of Zhejiang University(Engineering Science),2016,50(7):1418-1424.
[42]辜天来,付磊,张帅,等.咽式进气道设计工况下性能初步分析[J].航空动力学报,2014,29(9):2070-2078.Gu T L,Fu L,Zhang S,et al.Preliminary analysis of jaws inlet performance under design conditions[J].Journal of Aerospace Power,2014,29(9):2070-2078.
[43]Malo-Molina F J,Gaitonde D V,Ebrahimi H B.Three dimensional analysis of a fully coupled hypersonic air-breathing inlet-combustor flowpath[R].AIAA-2010-412,2010.
[44]Malo-Molina F J,Gaitonde D,Ebrahimi H B,et al.Threedimensional analysis of a supersonic combustor coupled to innovative inward-turning inlets[J].AIAA Journal,2010,48(3):572-582.
[45]方兴军.控制出口速度分布的超声速内流通道反设计[D].南京:南京航空航天大学,2011.Fang X J.Inverse design of supersonic internal flow path based on given outflow velocity profile[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2011.
[46]刘燚.控制出口马赫数分布的高超声速压缩通道反设计[D].南京:南京航空航天大学,2012.Liu Y.Inverse design of hypersonic air compression tube for generating desirable Mach profile[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2012.
[47]韩伟强,朱呈祥,尤延铖,等.给定下游边界的超声速流场逆向求解方法[J].推进技术,2016,37(4):624-631.Han W Q,Zhu C X,You Y C,et al.An inverse method for supersonic flowfield with given downstream boundary[J].Journal of Propulsion Technology,2016,37(4):624-631.
[48]卫锋,贺旭照,贺元元,等.三维内转式进气道双激波基准流场的设计方法[J].推进技术,2015,36(3):358-364.Wei F,He X Z,He Y Y,et al.Design method of dual-shock wave basic flow-field for inward turning inlet[J].Journal of Propulsion Technology,2015,36(3):358-364.
[49]何家祥,金东海.基于Busemann压升规律的可控消波内转基准流场设计[J].航空动力学报,2017,32(5):1168-1175.He J X,Jin D H.Busemann pressure rise distribution based design of inward turning basic flowfield with controlled and cancelled shock waves[J].Journal of Aerospace Power,2017,32(5):1168-1175.
[50]乔文友,余安远,黎崎.控制出口截面速度方向的内转式进气道设计方法研究[C].航天三网第38届技术交流会暨第二届空天动力联合会议,大连,2017.
[51]乔文友,黄国平,夏晨,等.发展用于高速飞行器前体/进气道匹配设计的逆特征线法[J].航空动力学报,2014,29(6):1444-1452.Qiao W Y,Huang G P,Xia C,et al.Development of inverse characteristic method for matching design of high-speed aircraft forebody/inlet[J].Journal of Aerospace Power,2014,29(6):1444-1452.
[52]谭慧俊,黄河峡,卜焕先,等.一种高超声速内转式进气道的内通道设计方法:CN105205220A[P].2015-12-30.
[53]Sobieczky H,Dougherty F C,Jones K.Hypersonic waverider design from given shock waves[C].The 1st International Hypersonic Waverider Symposium,University of Maryland,USA,1990.
[54]Xiao Y B,Yue L J,Chenr L H,et.al.Iso-contraction-ratio methodology for the design of hypersonic inward turning inlets with shape transition[R].AIAA-2012-5978,2012.
[55]尤延铖,黄国平,郭军亮,等.基于任意激波形状的内乘波式高超声速进气道:ZL200820159849.3[P].2009-09-02.
[56]肖雅彬,岳连捷,卢洪波,等.局部收缩比一致的变截面高超声速内转式进气道:ZL201210157992.X[P].2014-06-13.
[57]乔文友.可排除前体低能量的高超声速三维内收缩式进气道研究[D].南京:南京航空航天大学,2015.Qiao W Y.Design and investigation of a novel hypersonic threedimensional inward turning inlet for removing forebody low kinetic flow[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2015.
[58]Jones K D.A new inverse method for generating high-speed aerodynamic flows with application to waverider design[D].Colorado:University of Colorado Boulder,1993.
[59]Jones K D,Center K B.Waverider design methods for nonconical shock geometries[R].AIAA-2002-3204,2002.
[60]刘小勇.超燃冲压发动机技术[J].飞航导弹,2003,2:38-42.
[61]甘文彪,阎超,耿云飞,等.乘波飞行器一体化构型设计[J].空气动力学学报,2012,30(1):68-73.Gan W B,Yan C,Geng Y F,et al.Waverider design of integrated configuration[J].Acta Aerodynamica Sinica,2012,30(1):68-73.
[62]Nonweiler T R F.Aerodynamic problems of manned space vehicles[J].Journal of the Royal Aeronautical Society,1959,63(585):521-528.
[63]Rasmussen M.Hypersonic flow[M].New York:John Wiley&Sons Inc,1994.
[64]Starkey R P,Lewis M J.Critical design issues for airbreathing hypersonic waverider missiles[J].Journal of Spacecraft and Rockets,2001,38(4):510-519.
[65]Jones J G,Moore K C,Pike J,et al.A method for designing lifting configurations for high supersonic speeds,using axisymmetric flow fields[J].Ingenieur-Archiv,1968,37(1):56-72.
[66]He X Z,Le J L,Zhou Z,et al.Osculating inward turning cone waverider/inlet(OICWI)design methods and experimental study[R].AIAA-2012-5810,2012.
[67]Lewis M J,Takashima N.Engine/airframe integration for waverider cruise vehicles[R].AIAA-1993-0507,1993.
[68]Takashima N,Lewis M J.Wedge-cone waverider configuration for engine-airframe interaction[J].Journal of Aircraft,2012,32(5):1142-1144.
[69]赵桂林,胡亮,闻洁,等.乘波构形和乘波飞行器研究综述[J].力学进展,2003,33(3):357-374.Zhao G L,Hu L,Wen J,et al.An overview of the research on waveriders and waverider-derived hypersonic vehicles[J].Advances in Mechanics,2003,33(3):357-374.
[70]希舍尔.高超声速飞行器气动热力学设计问题精选[M].北京:国防工业出版社,2013.Hirschel E H.Selected aerothermodynamic design problems of hypersonic flight vehicles[M].Beijing:National Defense Industry Press,2013.
[71]Kothari A P,Tarpley C,McLaughlin T A,et al.Hypersonic vehicle design using inward turning flow fields[R].AIAA-1996-2552,1996.
[72]Mehta U,Aftosmis M,Bowles J,et al.Skylon aerospace plane and its aerodynamics and plumes[J].Journal of Spacecraft and Rockets,2016,53(2):340-353.
[73]Elvin J D.Integrated inward turning inlets and nozzles for hypersonic air vehicles:US 2007/0187550A1[P].2007-08-16.
[74]Smith T R,Bowcutt K G.Integrated hypersonic inlet design:USA,08256706B1[P].2012-09-04.
[75]Wang J F,Cai J S,Liu C Z,et al.Aerodynamic configuration integration design of hypersonic cruise aircraft with inwardturning inlets[J].Chinese Journal of Aeronautics,2017,30(4):1349-1362.
[76]南向军,张堃元,金志光.乘波前体两侧高超声速内收缩进气道一体化设计[J].航空学报,2012,33(8):1417-1426.Nan X J,Zhang K Y,Jin Z G.Integrated design of waverider forebody and lateral hypersonic inward turning inlets[J].Acta Aeronautica et Astronautica Sinica,2012,33(8):1417-1426.
[77]向先宏.基于三维内收缩进气道的高超声速飞行器一体化概念设计[D].南京:南京航空航天大学,2011.Xiang X H.Conceptual design of an integrative hypersonic vehicle based on 3Dinward-turning inlet[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2011.
[78]向先宏,程克明,王成鹏.基于类咽式进气道的高超声速飞行器一体化设计[J].宇航学报,2012,33(1):19-26.Xiang X H,Cheng K M,Wang C P.Integrative design of airbreathing hypersonic vehicle based on sim-Jaws inlet[J].Journal of Astronautics,2012,33(1):19-26.
[79]李永洲,张堃元.基于马赫数分布可控曲面外/内锥形基准流场的前体/进气道一体化设计[J].航空学报,2015,36(1):289-301.Li Y Z,Zhang K Y.Integrated design of forebody and inlet based on external and internal conical basic flow field with controlled Mach number distribution surface[J].Acta Aeronautica et Astronautica Sinica,2015,36(1):289-301.
[80]崔凯,胡守超,李广利,等.双旁侧进气高超声速飞机概念设计与评估[J].中国科学:技术科学,2013,43(10):1085-1093.
[81]Bowcutt K G,Smith T R,Kothari A P,et al.The hypersonic space and global transportation system:a concept for routine and affordable access to space[R].AIAA-2011-2295,2011.
[82]Langener T,Steelant J,Roncioni P,et al.Preliminary performance analysis of the LAPCAT-MR2by means of noseto-tail computations[R].AIAA-2012-5872,2012.
[83]向先宏,钱战森.吸气式高超声速飞行器机体/推进一体化设计技术研究进展及分类对比分析[J].推进技术,2018,39(10):2207-2218.Xiang X H,Qian Z S.An overview and development analysis of air-breathing hypersonic airframe/propulsion integrative design technology[J].Journal of Propulsion Technology,2018,39(10):2207-2218.
[84]Starkey R P,Lewis M J.Simple analytical model for parametric studies of hypersonic waveriders[J].Journal of Spacecraft and Rockets,1999,36(4):516-523.
[85]Takashima N,Lewis M J.Waverider configurations based on non-axisymmetric flow fields for engine-airframe integration[R].AIAA-1994-0380,1994.
[86]Jones K D,Sobieczky H,Seebass A R,et al.Waverider design for generalized shock geometries[J].Journal of Spacecraft and Rockets,1995,32(6):957-963.
[87]Kontogiannis K,Taylor N,Sóbester A.Parametric geometry models for hypersonic aircraft:integrated external inlet compression[R].AIAA-2016-0915,2016.
[88]陈小庆,侯中喜,何烈堂,等.吻切锥乘波构型优化设计与分析[J].国防科技大学学报,2007,29(4):12-16.Chen X Q,Hou Z X,He L T,et al.Optimized design and analyze of osculating cone waverider[J].Journal of National University of Defense Technology,2007,29(4):12-16.
[89]王卓,钱翼稷.乘波机外形设计[J].北京航空航天大学学报,1999,25(2):180-183.Wang Z,Qian Y J.Waverider configuration design[J].Journal of Beijing University of Aeronautics and Astronautics,1999,25(2):180-183.
[90]鲍文,姚照辉.综合离心力/气动力的升力体高超声速飞行器纵向运动建模研究[J].宇航学报,2009,30(1):128-133,144.Bao W,Yao Z H.Study on longitudinal modeling for integrated centrifugal/aero force lifting-body hypersonic vehicles[J].Journal of Astronautics,2009,30(1):128-133,144.
[91]肖洪,吴丁毅,刘振侠,等.两种乘波前体/进气道一体化设计与性能研究[J].哈尔滨工业大学学报,2009,41(7):150-154.Xiao H,Wu D Y,Liu Z X,et al.Integrated design and performance research of waverider forebody/inlet[J].Journal of Harbin Institute of Technology,2009,41(7):150-154.
[92]唐硕,祝强军.吸气式高超声速飞行器动力学建模研究进展[J].力学进展,2011,41(2):187-200.Tang S,Zhu Q J.Research progresses on flight dynamic modeling of airbreathing hypersonic vehicles[J].Advances in Mechanics,2011,41(2):187-200.
[93]张杰,王发民.乘波器的参数化设计研究[J].空气动力学学报,2008,26(1):115-118.Zhang J,Wang F M.Parametric waveriders design method study[J].Acta Aerodynamica Sinica,2008,26(1):115-118.
[94]You Y C,Zhu C X,Guo J L.Dual waverider concept for the integration of hypersonic inward-turning inlet and airframe forebody[R].AIAA-2009-7421,2009.
[95]Li Y Q,An P,Pan C J,et al.Integration methodology for waverider-derived hypersonic inlet and vehicle forebody[R].AIAA-2014-3229,2014.
[96]Gollan R J,Smart M K.Design of modular shape-transition inlets for a conical hypersonic vehicle[J].Journal of Propulsion&Power,2010,29(4):1-15.
[97]李怡庆,周驯黄,朱呈祥,等.曲锥前体/三维内转进气道一体化设计与分析[J].航空动力学报,2018,33(1):87-96.Li Y Q,Zhou X H,Zhu C X,et al.Integration design and analysis for curved conical forebody and three dimensional inward turning inlet[J].Journal of Aerospace Power,2018,33(1):87-96.
[98]肖尧,崔凯,李广利,等.全乘波背部进气高超声速飞行器构型概念研究[C].第十八届全国激波与激波管学术会议,北京,2018.
[99]周扬,黄国平.匹配飞行器前体的高外压缩内乘波进气道设计[C].第十五届推进系统气动热力学专业学术交流会,杭州,2015.
[100]乔文友,余安远,杨大伟,等.基于前体激波的内转式进气道一体化设计[J].航空学报,2018,39(10):122078.Qiao W Y,Yu A Y,Yang D W,et al.Integration design of inward-turning inlets based on forebody shock wave[J].Acta Aeronautica et Astronautica Sinica,2018,39(10):122078.
[101]乔文友,余安远,唐伟员.可匹配弹体的三维内收缩式高超声速进气道设计[C].第五届冲压发动机会议,厦门,2015.