核反应堆氧传感器用ZrO_2陶瓷连接技术研究进展
|
摘要
ZrO_2陶瓷型氧传感器具有测量精度高、范围广以及可直接以电压(或电流)形式输出等特点,在新型核反应堆有着重要的应用前景。然而由于ZrO_2陶瓷材料本身的特点及应用环境的特殊性,有必要进行ZrO_2陶瓷本体或与金属的可靠性连接,实现优势互补。综述了核电领域ZrO_2陶瓷的连接特点及目前用于ZrO_2陶瓷的连接方法,探讨各个连接方法的特点,并指出未来ZrO_2陶瓷连接技术的发展方向。
With the high measurement accuracy,wide range and direct output in the form of voltage(or current),ZrO_2 ceramic oxygen sensor has an important application prospect in the new type nuclear reactors. However,due to the characteristics of ZrO_2 ceramic material and special application environment,it is necessary to carry out a reliable joining of ZrO_2 ceramic with itself or metals to realize the complementary advantages. The joining characteristics and present joining methods of ZrO_2 ceramics in the field of nuclear power are summarized. The characteristics of each joining method are discussed,and the development direction of ZrO_2 ceramic joining technology is pointed out.
With the high measurement accuracy,wide range and direct output in the form of voltage(or current),ZrO_2 ceramic oxygen sensor has an important application prospect in the new type nuclear reactors. However,due to the characteristics of ZrO_2 ceramic material and special application environment,it is necessary to carry out a reliable joining of ZrO_2 ceramic with itself or metals to realize the complementary advantages. The joining characteristics and present joining methods of ZrO_2 ceramics in the field of nuclear power are summarized. The characteristics of each joining method are discussed,and the development direction of ZrO_2 ceramic joining technology is pointed out.
引文
[1]Aruna S.T,Balaji N,Rajam K.S.Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia coatingscontaining various mol%of yttria[J].Materials Characterization,2011,62(7):697-705.
[2]Rabiei A,Evans A.G.Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings[J].Acta materialia,2000,48(15):3963-3976.
[3]Tekeli S.The solid solubility limit of Al2O3and its effect on densification and microstructural evolution in cubic-zirconia used as an electrolyte for solid oxide fuel cell[J].Materials&design,2007,28(2):713-716.
[4]Han J.H.Joining of zirconia ceramics in green state using a paste of zirconia slurry[J].Ceramic International,2013(39):239-243.
[5]刘家臣,高海,魏艳秋.CePO4基与Zr O2基陶瓷的坯体连接及其界面特征[J].天津大学学报,2004,37(4):353-357.
[6]何欣.Zr O2陶瓷的微波连接[D].天津:天津大学,2008.
[7]Yamane T,Minamino Y,Hirao K,et al.Bonding of partiallystabilized zirconia and nickel with nickel oxide layer[J].Journal of materials science,1986,21(12):4227-4232.
[8]潘厚宏,王克军,伊藤勲.Zr O2陶瓷与Ni-Bi合金扩散焊研究[J].热加工工艺,2011,40(1):157-159.
[9]Yang B,Shen P,Yu L.T,et al.Electrochemically-driven direct joining of Ni and Zr O2[J].Scripta Materialia,2017(141):41-44.
[10]Durov A.V,Kostjuk B.D,Shevchenko A.V,et al.Joining of zirconia to metal with Cu-Ga-Ti and Cu-Sn-Pb-Ti fillers[J].Materials Science and Engineering A,2000(290):186-189.
[11]Lin K.L,Singh M,Asthana R,et al.Interfacial and mechanical characterization of yttria-stabilized zirconia(YSZ)to stainless steel joints fabricated using Ag-Cu-Ti interlayers[J].Ceramics International,2014,40(1):2063-2071.
[12]裴艳虎,李红,黄海新.Zr O2陶瓷与TC4真空钎焊接头组织和性能[J].焊接,2016(6):22-25.
[13]魏灿.微电流辅助Ag-Cu钎料在Zr O2上的润湿及其与304不锈钢的连接[D].吉林:吉林大学,2016.
[14]卞红,胡胜鹏,宋晓国,等.钎焊温度对Ti60/AgCu/ZrO2接头界面组织及性能的影响[J].航空学报,2017,38(12):1-9.
[15]黄小丽,林实,肖纪美.Zr O2与40Cr钢钎焊中的缓冲层[J].材料科学与工程,1996,14(3):58-61.
[16]浩宏奇,金志浩,王笑天.氧化锆陶瓷与不锈钢钎焊的研究[J].西安交通大学学报,1995,29(2):85-89.
[17]Xiong J H,Huang J H,Wang Z P.JoiningCf/SiC composite and Ti alloy using composite filler materials[J].Materials Science and Technology,2009,25(8):1046-1050.
[18]熊进辉,黄继华,薛行雁,等.Cf/SiC复合材料与Ti合金的AgCuTi-W复合钎焊[J].航空材料学报,2009,29(6):48-52.
[2]Rabiei A,Evans A.G.Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings[J].Acta materialia,2000,48(15):3963-3976.
[3]Tekeli S.The solid solubility limit of Al2O3and its effect on densification and microstructural evolution in cubic-zirconia used as an electrolyte for solid oxide fuel cell[J].Materials&design,2007,28(2):713-716.
[4]Han J.H.Joining of zirconia ceramics in green state using a paste of zirconia slurry[J].Ceramic International,2013(39):239-243.
[5]刘家臣,高海,魏艳秋.CePO4基与Zr O2基陶瓷的坯体连接及其界面特征[J].天津大学学报,2004,37(4):353-357.
[6]何欣.Zr O2陶瓷的微波连接[D].天津:天津大学,2008.
[7]Yamane T,Minamino Y,Hirao K,et al.Bonding of partiallystabilized zirconia and nickel with nickel oxide layer[J].Journal of materials science,1986,21(12):4227-4232.
[8]潘厚宏,王克军,伊藤勲.Zr O2陶瓷与Ni-Bi合金扩散焊研究[J].热加工工艺,2011,40(1):157-159.
[9]Yang B,Shen P,Yu L.T,et al.Electrochemically-driven direct joining of Ni and Zr O2[J].Scripta Materialia,2017(141):41-44.
[10]Durov A.V,Kostjuk B.D,Shevchenko A.V,et al.Joining of zirconia to metal with Cu-Ga-Ti and Cu-Sn-Pb-Ti fillers[J].Materials Science and Engineering A,2000(290):186-189.
[11]Lin K.L,Singh M,Asthana R,et al.Interfacial and mechanical characterization of yttria-stabilized zirconia(YSZ)to stainless steel joints fabricated using Ag-Cu-Ti interlayers[J].Ceramics International,2014,40(1):2063-2071.
[12]裴艳虎,李红,黄海新.Zr O2陶瓷与TC4真空钎焊接头组织和性能[J].焊接,2016(6):22-25.
[13]魏灿.微电流辅助Ag-Cu钎料在Zr O2上的润湿及其与304不锈钢的连接[D].吉林:吉林大学,2016.
[14]卞红,胡胜鹏,宋晓国,等.钎焊温度对Ti60/AgCu/ZrO2接头界面组织及性能的影响[J].航空学报,2017,38(12):1-9.
[15]黄小丽,林实,肖纪美.Zr O2与40Cr钢钎焊中的缓冲层[J].材料科学与工程,1996,14(3):58-61.
[16]浩宏奇,金志浩,王笑天.氧化锆陶瓷与不锈钢钎焊的研究[J].西安交通大学学报,1995,29(2):85-89.
[17]Xiong J H,Huang J H,Wang Z P.JoiningCf/SiC composite and Ti alloy using composite filler materials[J].Materials Science and Technology,2009,25(8):1046-1050.
[18]熊进辉,黄继华,薛行雁,等.Cf/SiC复合材料与Ti合金的AgCuTi-W复合钎焊[J].航空材料学报,2009,29(6):48-52.