SUS430铁素体不锈钢连续退火试验研究
|
摘要
为了扩大SUS430铁素体不锈钢的产能、降低生产成本,对浅冲用SUS430铁素体不锈钢采用连续退火工艺代替罩式退火工艺。对比分析不同退火工艺下钢的显微组织和力学性能。最终得出:SUS430铁素体不锈钢连续退火工艺的性能完全满足浅冲用户的需求。
In order to expand the production capacity and reduce the production cost of SUS430 ferritic stainless steel, the continuous annealing process was used to instead of the bell type annealing process for shallow drawing materials. The microstructure and mechanical properties of the steel were comparatively analyzed under different annealing process. The results show that the performance of SUS430 ferritic stainless steel under continuous annealing process can meet the user's requirements completely.
In order to expand the production capacity and reduce the production cost of SUS430 ferritic stainless steel, the continuous annealing process was used to instead of the bell type annealing process for shallow drawing materials. The microstructure and mechanical properties of the steel were comparatively analyzed under different annealing process. The results show that the performance of SUS430 ferritic stainless steel under continuous annealing process can meet the user's requirements completely.
引文
[1]杨咏阶.SUS430不锈钢薄板起皱缺陷的成因及凝固组织对它的影响[J].宽厚板,2006,12(6):29-31.
[2]李晓波.具有良好抗皱性能的SUS430型铁素体不锈钢冷板生产工艺技术的开发[J].塑性工程学报,2006,13(3):35-39.
[3]陆世英,张延凯,康喜范.不锈钢[M].北京:原子能出版社,1995.
[4]Tadashi Sawatani,Mitsuo Ishii,Hirohumi Yoshimura,et a1.Development of continuous annealing process for 17%Cr stainless steel strip[J].Diseases of the Colon&Rectum,2015,58(8):713-725.
[5]Laura Alleva,Antonio Bufalini,Gustavo Brascugli,et al.Direct annealing-a new route in the production cycle of 430 ferritics stainless steel[J].Thyssen Krupp techforum,2004(1):l8-23.
[6]Jha B K,Jha P,Singh C D.Process technology for the continuous hot band annealing of 17%Cr ferritic stainless steel[J].Journal of Materials Engineering and Performance,2002,11(2):l80-186.
[2]李晓波.具有良好抗皱性能的SUS430型铁素体不锈钢冷板生产工艺技术的开发[J].塑性工程学报,2006,13(3):35-39.
[3]陆世英,张延凯,康喜范.不锈钢[M].北京:原子能出版社,1995.
[4]Tadashi Sawatani,Mitsuo Ishii,Hirohumi Yoshimura,et a1.Development of continuous annealing process for 17%Cr stainless steel strip[J].Diseases of the Colon&Rectum,2015,58(8):713-725.
[5]Laura Alleva,Antonio Bufalini,Gustavo Brascugli,et al.Direct annealing-a new route in the production cycle of 430 ferritics stainless steel[J].Thyssen Krupp techforum,2004(1):l8-23.
[6]Jha B K,Jha P,Singh C D.Process technology for the continuous hot band annealing of 17%Cr ferritic stainless steel[J].Journal of Materials Engineering and Performance,2002,11(2):l80-186.