摘要
本文提出了一种基于频域重构的激励和响应识别方法,由两组试验获取的激励信号在频域上重新构造出一种新的激励,以新的激励去识别响应信号,从而获取试验中较难实现的激励和响应信号,该方法已成功应用于实际工程试验分析中。
In this paper, an excitation and response identification method based on frequency domain reconstruction is proposed. The excitation signals obtained by the two experimental groups in the requency domain construct a new excitation, with the new excitation to identify the response signal, and gets more difficult to achieve in the test of the excitation and response signals. This method has been successfully applied to the analysis of the actual engineering test.
引文
[1]傅志方,华宏星.模态分析理论与应用[M].上海交通大学出版社,2002.
[2]Dobson B J,Rider E.A review of the indirect calculation of excitation forces from measured structural response data[J].Journal of Mechanical Engineering Science:Part C,1990,204:69-75.
[3]Stevens K K.Force identification problems-an overview[C].Proceedings of SEM spring conference on experimental mechanics,FL,USA,1987:838-844.
[4]徐志英,廖旭晖.动态载荷识别及其进展[J].常州工学院学报,2006,19(4):13-18.
[5]许锋,陈怀海,鲍明.机械振动载荷识研究的现状与未来[J].中国机械工程(2)2002,13(6):526-530.
[6]伍乾坤,等.一种直接求解的动态载荷识别方法[J].应用力学学报,2011,28(2):201-206.
[7]朱斯岩,朱礼文.运载火箭动态载荷识别研究[J].振动工程学报,2008,21(2):135-139.