同步箝位压电马达的运动特性仿真
|
摘要
为研究同步箝位控制压电马达的动力学特性,运用系统仿真软件Maplesim,分别建立箝位开关、压电陶瓷片和单自由度振子的数值模型,进行了压电马达进行了整体性能仿真。该动态模型的仿真结果表明,该压电马达具有良好的步进特性,在驱动电压和占空比分别为100V和50%时,空载单次步距为8.182μm;输出轴平均速度随驱动电压的增加而增加,随负载和占空比的增加而减小,呈一定的函数关系。该仿真对压电箝位马达在实验和使用时的控制参数调节提供了重要参考。
In order to study the dynamic characteristics of a piezoelectric motor based on synchronized switching control.Mathematical simulation software Maplesim and its existing mathematical models were used to construct simulation model for piezoelectric clamp switch,piezoelectric ceramics and vibrator respectively.The overall system simulation for Piezoelectric motor had also been done with this model.It was illustrated that the piezoelectric motor had a favorable movement characteristics after analyzing the results of the simulation.The single-step distance for piezoelectric motor without load was 8.182μm on condition that the drive voltage and duty cycle were 100Vand50% respectively.It also proved that the average velocity of the output shaft was an approximately linear function of the driving voltage and decreased with the increases of load and duty cycle.The simulation provided an important reference for controls parameters adjustment of piezoelectric motor in the further experiment and practical application.
In order to study the dynamic characteristics of a piezoelectric motor based on synchronized switching control.Mathematical simulation software Maplesim and its existing mathematical models were used to construct simulation model for piezoelectric clamp switch,piezoelectric ceramics and vibrator respectively.The overall system simulation for Piezoelectric motor had also been done with this model.It was illustrated that the piezoelectric motor had a favorable movement characteristics after analyzing the results of the simulation.The single-step distance for piezoelectric motor without load was 8.182μm on condition that the drive voltage and duty cycle were 100Vand50% respectively.It also proved that the average velocity of the output shaft was an approximately linear function of the driving voltage and decreased with the increases of load and duty cycle.The simulation provided an important reference for controls parameters adjustment of piezoelectric motor in the further experiment and practical application.
引文
[1]吴博达,鄂世举,杨志刚,等.压电驱动与控制技术的发展与应用[J].机械工程学报,2003,39(10):79-85.WU Boda,E Shiju,YANG Zhigang,et al.Development and application of Piezoelectric actuation and control[J].Chinese Journal of Mechanical Engineering,2003,39(10):79-85.
[2]贺良国,刘永斌,张祺,等.新型同步箝位控制压电马达[J].振动与冲击,2013,32(23):26-31.HE Liangguo,LIU Yongbin,ZHANG Qi,et al.A novel Piezoelectric with synchronous anchoring/loosening control[J].Journal of Vibration and Shock,2013,32(23):26-31.
[3]赵鑫鑫,杨耀东.液力机械自动变速器Maplesim仿真研究[J].机械设计与制造,2013(8):57-60.ZHAO Xinxin,YANG Yaodong.Automatic transmission simulation study based on maplesim[J].Machinery Design&Manufacture,2013(8):57-60.
[4]王记,赵修平.基于Maplesim的自由度平台仿真[J].海军航空工程学院学报,2013,28(6):604-608.
[5]HE Liangguo,ZHANG Qi,PAN Cheangliang,et al.Piezoelectric motor based on synchronized switching control[J].Sensors and Actuators A 197,2013:53-61.
[6]贺良国.基于同步箝位控制与周期机械波合成的压电马达研究[D].合肥:中国科学技术大学,2013.
[2]贺良国,刘永斌,张祺,等.新型同步箝位控制压电马达[J].振动与冲击,2013,32(23):26-31.HE Liangguo,LIU Yongbin,ZHANG Qi,et al.A novel Piezoelectric with synchronous anchoring/loosening control[J].Journal of Vibration and Shock,2013,32(23):26-31.
[3]赵鑫鑫,杨耀东.液力机械自动变速器Maplesim仿真研究[J].机械设计与制造,2013(8):57-60.ZHAO Xinxin,YANG Yaodong.Automatic transmission simulation study based on maplesim[J].Machinery Design&Manufacture,2013(8):57-60.
[4]王记,赵修平.基于Maplesim的自由度平台仿真[J].海军航空工程学院学报,2013,28(6):604-608.
[5]HE Liangguo,ZHANG Qi,PAN Cheangliang,et al.Piezoelectric motor based on synchronized switching control[J].Sensors and Actuators A 197,2013:53-61.
[6]贺良国.基于同步箝位控制与周期机械波合成的压电马达研究[D].合肥:中国科学技术大学,2013.