摘要
某新型应答机内部腔体双工器在飞行过程中出现放电现象,经过分析及试验验证,确认放电原因为气体密度降低导致内部导体之间的击穿电压降低(低气压放电)。利用Ansoft HFSS场仿真软件和Ansoft designer电路仿真软件,采用场路结合的方法,对该双工器发射通路内部的电场强度进行建模仿真计算,根据仿真计算结果,给出适应工程化应用的加固处理方法。
A discharge Phenomena occurred during the flight of a new type transponder with a duplex cavity fixed inside. After analysis and experimental verification,the discharge is caused by low pressure when the gas density reduction makes the breakdown voltage lower between two conductors of the duplexer. With the help of simulation software such as Ansoft HFSS and Ansoft Designer,we model and simulate the electric field intensity within transmission channel of the duplexer. According to the simulation results,we put forward a method to reinforce it for engineering application.
引文
[1]王小林,安城,唐德效,吴须大.FY22卫星功率合成器低气压放电和微放电预防[J].上海航天,2005:65-68.
[2]刘中华,李树杰.星用微波组件低气压放电与真空微放电效应研究[J].电子产品可靠性与环境试验,2014,32(4):4-7.
[3]吴须大,杨军.腔体滤波器与低气压放电[J].空间电子技术,2001(4):55-60.
[4]王宇平,夏玉林.星载微波设备低气压放电及其防范[J].上海航天,2005(增刊):65-68.
[5]Ming Y.Power-hangdling capability for RF filters[J].IEEE Micro.Magazine,2007(10):88-97.
[6]薛亚杰,殷新社.微波器件低气压放电阀值的计算[J].空间电子技术,2012,9(4):55-61.
[7]Udiljak R,Anderson D,Ingvarson P.New method for detection of multination[J].IEEE Transactions Plasma Science,2003,31(3):396-404.
[8]王瑞,张娜,李韵,胡天存,王新波,崔万照.低气压放电效应研究进展[J].空间电子技术,2015(1):1-6.