核电厂缝隙结构的腐蚀与防护
|
摘要
将核电厂缝隙结构归纳为九类,讨论了九类不同缝隙结构的腐蚀防护措施,针对重要设备的缝隙结构提出了预防性的腐蚀检测建议。
Crevice structures in nuclear power plants were summarized into nine types.Corrosion protection measures for the nine different types of crevice structures are discussed.Preventive corrosion detection of crevice structures for important equipment in nuclear power plants is proposed.
Crevice structures in nuclear power plants were summarized into nine types.Corrosion protection measures for the nine different types of crevice structures are discussed.Preventive corrosion detection of crevice structures for important equipment in nuclear power plants is proposed.
引文
[1]陈东旭,吴欣强,韩恩厚.缝隙腐蚀研究进展及核电材料的缝隙腐蚀问题[J].中国腐蚀与防护学报,2014,34(4):295-300.
[2] The World Association of Nuclear Operators.WANO SOER 2003-2,reactor pressure vessel degradation at davis-besse nuclear power station[R].London:The World Association of Nuclear Operators,2006.
[3]孟剑,徐金康.AP1000反应堆蒸汽发生器的设计特点[J].发电设备,2015,29(1):35-39.
[4]吴小飞.核电厂蒸汽发生器维修工艺[J].设备管理与维修,2018(10):73-75.
[5] ROBERT M K.Gasket materials and other factors influencing the crevice corrosion resistance of stainless steel flanges[R].Houston,US:National Association of Corrosion Engineer,1998.
[6]黄德军,王绍尉,李成涛,等.EB104/EB202涂层对904L不锈钢的防腐蚀效果[J].腐蚀与防护,2017,38(10):741-746,750.
[7]张路怀,贾祥,严天文,等.我国核电厂紧固件管理要求建议[J].机电产品开发与创新,2016,29(5):1-2,5.
[8]边飞龙,黄燕滨,时小军,等.海洋环境下螺纹紧固件复合防腐技术[J].电镀与涂饰,2010,29(12):64-66.
[9]刘杨宇,刘杨君,康绍炜,等.新型复合结构防腐层在沿海大型油罐罐底边缘板的应用[J].涂层与防护,2018,39(6):1-7.
[10]邹铭,师华,吕化工.杭州湾大桥钢护栏地脚螺栓防腐新工艺[J].涂料技术与文摘,2015,36(1):23-26,43.
[11] JIM B.Corrosion at pipe supports causes&solutions[R].Houston,US:InterResources Inc.,2002.
[12] GERHARD S,ANIBAL D,AKINYEMI O,et al.Preventing pitting and crevice corrosion of offshore stainless steel tubing[J],World Oil,2009,230(4):73-80.
[13]杨津瑞,贺钰林,刘一博,等.核电厂蒸汽发生器各层支撑板视频检查技术[J].设备管理与维修,2017(1):39-41.
[14]刘一博,程檀,程辉,等.核电厂蒸汽发生器鼓泡清洗技术研究[J].清洗世界,2017,33(12):10-12.
[15]宋双官,李军,黄清生.法兰密封面腐蚀缺陷超声相控阵检测技术[J].无损检测,2014,36(4):33-37,41.
[16] ANDRUSCHAK N,SALETES I,FILLETER T,et al.An NDT guided wave technique for the identification of corrosion defects at support locations[J].NDT&e International,2015,75:72-79.
[2] The World Association of Nuclear Operators.WANO SOER 2003-2,reactor pressure vessel degradation at davis-besse nuclear power station[R].London:The World Association of Nuclear Operators,2006.
[3]孟剑,徐金康.AP1000反应堆蒸汽发生器的设计特点[J].发电设备,2015,29(1):35-39.
[4]吴小飞.核电厂蒸汽发生器维修工艺[J].设备管理与维修,2018(10):73-75.
[5] ROBERT M K.Gasket materials and other factors influencing the crevice corrosion resistance of stainless steel flanges[R].Houston,US:National Association of Corrosion Engineer,1998.
[6]黄德军,王绍尉,李成涛,等.EB104/EB202涂层对904L不锈钢的防腐蚀效果[J].腐蚀与防护,2017,38(10):741-746,750.
[7]张路怀,贾祥,严天文,等.我国核电厂紧固件管理要求建议[J].机电产品开发与创新,2016,29(5):1-2,5.
[8]边飞龙,黄燕滨,时小军,等.海洋环境下螺纹紧固件复合防腐技术[J].电镀与涂饰,2010,29(12):64-66.
[9]刘杨宇,刘杨君,康绍炜,等.新型复合结构防腐层在沿海大型油罐罐底边缘板的应用[J].涂层与防护,2018,39(6):1-7.
[10]邹铭,师华,吕化工.杭州湾大桥钢护栏地脚螺栓防腐新工艺[J].涂料技术与文摘,2015,36(1):23-26,43.
[11] JIM B.Corrosion at pipe supports causes&solutions[R].Houston,US:InterResources Inc.,2002.
[12] GERHARD S,ANIBAL D,AKINYEMI O,et al.Preventing pitting and crevice corrosion of offshore stainless steel tubing[J],World Oil,2009,230(4):73-80.
[13]杨津瑞,贺钰林,刘一博,等.核电厂蒸汽发生器各层支撑板视频检查技术[J].设备管理与维修,2017(1):39-41.
[14]刘一博,程檀,程辉,等.核电厂蒸汽发生器鼓泡清洗技术研究[J].清洗世界,2017,33(12):10-12.
[15]宋双官,李军,黄清生.法兰密封面腐蚀缺陷超声相控阵检测技术[J].无损检测,2014,36(4):33-37,41.
[16] ANDRUSCHAK N,SALETES I,FILLETER T,et al.An NDT guided wave technique for the identification of corrosion defects at support locations[J].NDT&e International,2015,75:72-79.