摘要
为提高国防军工行业计量管理水平,提升型号计量保障能力,各国防军工单位都在进行型号计量监督检查,本文根据近年来型号计量监督检查发过程中发现的共性问题进行汇总、分析,归纳出一系列典型案例,对发生的原因进行分析,提出解决方案,并进一步提出了型号计量监督检查工作的改进建议。
In order to improve the measurement management level of national defense,all defense industry units complete metrological supervision to enhance the ability of model measurement support. The author summarize the typical cases based on the problems found in the inspection. The typical cases and its causes were briefly discussed,and solution were given below. come up with recommendations for improvement at last.
引文
[1]苏鹏辉,苗静.型号计量管理与控制[J].北京:计量与测试技术,2015.
[2]国家国防科技工业局.武器装备科研生产单位计量监督检查工作程序:JJF(军工)8—2015[S].北京,2016.
[3]国家国防科技工业局.武器装备科研生产单位计量工作通用要求:JJF(军工)7—2015[S].北京,2016.
[4]银红.专用测试设备的计量管理[J].北京:计量技术,2015.
[5]张寅.浅谈如何做好检测实验室计量管理工作[J].计量与测试技术,2015.
[6]屈淑兰.型号计量保证有效途径的探讨[J].宇航计测技术,2018.
[7]徐益忠,庞丽娟.军工型号计量保证工作中存在的问题和有关建议[J].计测技术,2010,30(1):48-51.
[8]吴倩,王哲.质量管理体系中的计量保证工作研究[J],宇航计测技术,2017.