铅酸蓄电池使用维护解析
|
摘要
铅酸蓄电池电压稳定、价格便宜,已大量地应用于军用装备领域。但由于使用不当,铝酸蓄电池常会出现严重馈电、不能激活等问题,从而导致其被提前报废,造成大量的浪费。首先,讨论了铅酸蓄电池在使用维护过程中需要注意的问题;然后,重点介绍了铅酸蓄电池充电过程中常见的误操作和忽视疏通电池通气孔对其造成的危害;最后,总结了在日常使用维护中应注意的事项。
Lead-acid batteries have been widely used in military equipment field because of their stable voltage and low price. Howerver, due to improper use, lead-acid batteries often appear serious feeding, inactivation and other issues, which causes them to be scrapped in advance, resulting in a lot of waste. Firstly, the problems that need to be paid attention to during the use and maintenance of lead-acid batteries are discussed. Then, the common misoperations in the charging process of lead-acid batteries and the harm caused by neglecting the neglecting to dredge battery blowhole are introduced. Finally, the matters that should be paid attention to in daily use and maintenance are summarized.
Lead-acid batteries have been widely used in military equipment field because of their stable voltage and low price. Howerver, due to improper use, lead-acid batteries often appear serious feeding, inactivation and other issues, which causes them to be scrapped in advance, resulting in a lot of waste. Firstly, the problems that need to be paid attention to during the use and maintenance of lead-acid batteries are discussed. Then, the common misoperations in the charging process of lead-acid batteries and the harm caused by neglecting the neglecting to dredge battery blowhole are introduced. Finally, the matters that should be paid attention to in daily use and maintenance are summarized.
引文
[1]胡克成,陈宏,沈健,等.使用条件对阀控式铅酸电池的寿命的影响[J].化工进展,2003(6):654-656.
[2]李俄收,吴文民.铅酸蓄电池的充电方法与充电工艺[J].电源技术,2004,28(5):328-330.
[3]毕大成,周希德.电动汽车铅酸蓄电池快速充电方法的研究[J].电源技术,2000,24(3):3159-3161.
[4]于成伟.大容量铅酸蓄电池的快速充电方法[J].汽车电器,2008(10):65.
[5]张月滨,王星博,任永乐,等.延长铅酸蓄电池寿命的保护装置的设计[J].起重运输机械,2007(10):23-26.
[2]李俄收,吴文民.铅酸蓄电池的充电方法与充电工艺[J].电源技术,2004,28(5):328-330.
[3]毕大成,周希德.电动汽车铅酸蓄电池快速充电方法的研究[J].电源技术,2000,24(3):3159-3161.
[4]于成伟.大容量铅酸蓄电池的快速充电方法[J].汽车电器,2008(10):65.
[5]张月滨,王星博,任永乐,等.延长铅酸蓄电池寿命的保护装置的设计[J].起重运输机械,2007(10):23-26.