基于Inventor的内摆线参数化设计及轨迹仿真
|
摘要
基于Autodesk Inventor三维设计软件,创建了内摆线的参数化设计模型,实现了内摆线轨迹的动态模拟。改变设计参数,直观呈现了多种内摆线的动态轨迹,避免了重复建模,提高了设计效率。通过仿真结果,分析了设计参数与内摆线轨迹之间的关系,有助于理解内摆线的生成过程和轨迹性质。
Based on the 3D design software of Autodesk Inventor, the parametric design model of the hypocycloid is created, and the dynamic simulation of the hypocycloid trajectory is realized. Changing the design parameters can intuitively display the dynamic trajectories of multiple hypocycloids, avoiding repeated modeling and improving the design efficiency. Through the simulation results, the relationship between the design parameters and the hypocycloid trajectory is analyzed, which helps to understand the formation process and trajectory properties of the hypocycloid.
Based on the 3D design software of Autodesk Inventor, the parametric design model of the hypocycloid is created, and the dynamic simulation of the hypocycloid trajectory is realized. Changing the design parameters can intuitively display the dynamic trajectories of multiple hypocycloids, avoiding repeated modeling and improving the design efficiency. Through the simulation results, the relationship between the design parameters and the hypocycloid trajectory is analyzed, which helps to understand the formation process and trajectory properties of the hypocycloid.
引文
[1]王洪欣,等.内摆线的图形分类与应用研究[J].江苏建筑职业技术学院学报,2017(1):16-19.
[2]夏合勇,戴俊平,赵川.内摆线的轨迹性质分析[J]..机电工程技术,2017(1):25-30.
[3]周志红.利用几何画板分析平摆线运动[J]..实验教学与仪器,2018(2):46.
[4]王琳琳.基于Mathematica7.0设计外摆线轨迹动态模型[J]..襄阳职业技术学院学报,2013(1):31-33.
[5]卢新杰.实例解析Inventor的参数动画[J]..电脑知识与技术,2013(3):600-602.
[6]李晓芳,闫其顺.Inventor软件在微课制作过程中的应用探索[J]..当代教育实践与教学研究,2016(10):13-14.
[2]夏合勇,戴俊平,赵川.内摆线的轨迹性质分析[J]..机电工程技术,2017(1):25-30.
[3]周志红.利用几何画板分析平摆线运动[J]..实验教学与仪器,2018(2):46.
[4]王琳琳.基于Mathematica7.0设计外摆线轨迹动态模型[J]..襄阳职业技术学院学报,2013(1):31-33.
[5]卢新杰.实例解析Inventor的参数动画[J]..电脑知识与技术,2013(3):600-602.
[6]李晓芳,闫其顺.Inventor软件在微课制作过程中的应用探索[J]..当代教育实践与教学研究,2016(10):13-14.