管板复合式内高压成形液压机的有限元分析
|
摘要
介绍了用于管板复合式内高压成形工艺的液压机结构,利用有限元分析软件对液压机在两种不同工艺动作下的机构力学性能进行分析,研究液压机在管式和板式内高压成形工况下的应力及变形,同时保证两种工艺动作工作时压力机的强度和刚度满足设计要求。研究方法和结果为管板复合式内高压成形液压机的结构设计提供了指导和借鉴。
This paper introduces the structure of the hydraulic press for the tube plate composite internal high pressure forming hydraulic press. Using the finite element analysis software,the mechanical properties of the hydraulic press under two different process movements are analyzed. The stress and shape of the hydraulic press in the tube-sheet composite internal high pressure forming conditions are studied,and two kinds of operation work are guaranteed. The strength and stiffness of the press meet the design requirements. The research methods and results provide guidance and reference for the structural design of tubesheet composite hydroforming machine.
This paper introduces the structure of the hydraulic press for the tube plate composite internal high pressure forming hydraulic press. Using the finite element analysis software,the mechanical properties of the hydraulic press under two different process movements are analyzed. The stress and shape of the hydraulic press in the tube-sheet composite internal high pressure forming conditions are studied,and two kinds of operation work are guaranteed. The strength and stiffness of the press meet the design requirements. The research methods and results provide guidance and reference for the structural design of tubesheet composite hydroforming machine.
引文
[1]李洪洋,刘海军,吕海源,等.管材内高压成形国内研究进展及发展趋势[J].中国机械工程,2006(10):54-56.
[2]苑世剑.我国内高压成形技术现状与进展[J].锻压技术,2004(3):1-2.
[3]张红梅,陆宪忠.管件液压成形技术及其汽车工业中的应用[J].重型汽车,2004(2):17-18.
[2]苑世剑.我国内高压成形技术现状与进展[J].锻压技术,2004(3):1-2.
[3]张红梅,陆宪忠.管件液压成形技术及其汽车工业中的应用[J].重型汽车,2004(2):17-18.