某型飞机空舰导弹供电系统检测仪的软件设计
|
摘要
为解决某型飞机空舰导弹供电系统在发射启动阶段无法检测满负载能力和纹波电压的问题,本文设计了空舰导弹供电系统检测仪。采用实时嵌入式控制器、实时操作系统(real-time operating system,RTX)、变速率采样及缓冲式传输等技术,实现了纳秒级供电瞬间电压和电流波形的还原及实时检测,提高了检测深度,缩小了故障定位范围,实现了供电系统综合检测。使用结果表明,该检测仪运行稳定可靠、检测准确度高、扩展性好,能有效提高部队空舰导弹供电系统维护保障能力。该设计可应用于其他主战机型空舰导弹供电系统的原位检测,应用前景广阔。
In order to solve the problem that the power supply system of an aircraft air-to-ship missile can not detect the full load capacity and ripple voltage during launching start-up stage,this paper designs an air-to-ship missile power supply system detector.Real-time embedded controller,real-time operating system(RTX),variable speed sampling and buffer transmission technology are used to realize the restoration and real-time detection of instantaneous voltage and current waveforms in nanosecond power supply.The detection depth is improved,the fault location range is reduced,and the comprehensive detection of power supply system is realized.The application results show that the tester runs stably and reliably,has high detection accuracy and good expansibility,and can effectively improve the maintenance and support capability of power supply system of airto-ship missile.The design can be applied to the in-situ detection of power supply system of other main fighter type air-to-ship missiles,and has broad application prospects.
In order to solve the problem that the power supply system of an aircraft air-to-ship missile can not detect the full load capacity and ripple voltage during launching start-up stage,this paper designs an air-to-ship missile power supply system detector.Real-time embedded controller,real-time operating system(RTX),variable speed sampling and buffer transmission technology are used to realize the restoration and real-time detection of instantaneous voltage and current waveforms in nanosecond power supply.The detection depth is improved,the fault location range is reduced,and the comprehensive detection of power supply system is realized.The application results show that the tester runs stably and reliably,has high detection accuracy and good expansibility,and can effectively improve the maintenance and support capability of power supply system of airto-ship missile.The design can be applied to the in-situ detection of power supply system of other main fighter type air-to-ship missiles,and has broad application prospects.
引文
[1]高红红.机载电源检测系统的设计[J].西安工业大学学报,2009,29(6):534-538.
[2]刘建峰.一种航空地面电源性能检测与故障诊断系统的研究[D].沈阳:东北大学,2011.
[3]张文华,徐田中,李钢.变电站直流电源移动式微机检测设备[J].电源技术应用,2004,7(10):633-635.
[4]熊华刚,王中华.先进航空电子综合技术[M].北京:国防工业出版社,2009.
[5]支超有.机载数据总线技术及其应用[M].北京:国防工业出版社,2009.
[6]叶华,李彬,高培淞,等.航空相机检测仪系统的设计与实现[J].国外电子测量技术,2017,36(5):40-44.
[7]白江浩,文国军,朱振利,等.便携式辉光放电重金属检测仪的设计[J].仪表技术与传感器,2017,24(3):34-36.
[8]陈瑞森.基于AT89C52的可配置环境检测仪设计[J].智能计算机与应用,2017,7(5):129-132.
[9]邹明虎,闫军,万里波,等.基于嵌入式计算机的雷达数字拖动设备检测仪[J].兵工自动化,2017,36(10):24-28.
[10]王洪庆.基于单片机控制的煤气表密封水试自动检测仪[J].安徽电子信息职业技术学院学报,2017,16(2):8-10.
[11]周岳斌,王冬,杨凯.便携式甲醛及PM2.5检测仪设计[J].机械管理开发,2015(3):19-21.
[12]杨帅,熊德智,李建新.基于载波通信的低压用户串户检测仪的设计[J].计算机应用,2016(4):56-58.
[13]徐志刚,赵祥模,宋焕生,等.多功能混凝土超声波检测仪软件设计与实现[J].计算机应用与软件,2008,25(1):276-279.
[14]吴向臣,吴茂林,吴作栋.基于Arduino的通用型通路与绝缘性检测仪设计[J].舰船电子工程,2016,36(3):126-129.
[15]王大鹏,范惠林,陈丹强,等.基于ARM-WinCE的某型航空发动机温控盒检测仪设计[J].电子技术应用,2013,39(5):8-11.
[16]钱平,于宝成,杜玉立.基于LabVIEW的某型光电雷达随动电子部件检测仪软件设计[J].软件导刊,2017,16(9):117-119.
[17]闫保中,孟庆丹,邹银红.基于Linux Qt的无损信号检测仪人机界面软件的设计与实现[J].化工自动化及仪表,2014,41(2):134-137.
[18]张万良.基于嵌入式处理器的瓦斯检测仪设计[J].煤炭技术,2017,36(2):244-245.
[19]黄辉,张跃.脉搏血氧检测仪软件设计优化[J].计算机工程与设计,2013,34(8):2737-2742.
[20]杨珂,宋国堃,赵世平.基于多线程技术的测控系统软件设计[J].电子设计工程,2016,24(16):89-91.
[21]徐熠刚,李青,吴轶,等.远程地下水COD在线检测仪设计[J].计算机测量与控制,2017,25(11):311-315.
[22]武孝勇,张维忠,袁翠梅,等.一种基于TOF相机的人头检测算法研究[J].青岛大学学报:工程技术版,2017,32(4):42-45.
[23]邓嵘,曹恩国,王萌,等.便携式食品检测仪设计[J].机械设计,2015,32(12):126-128.
[24]蔡宇宏,王田刚,李正清,等.一种新型低温容器综合性能检测仪设计及应用[J].低温工程,2016(2):32-37.
[2]刘建峰.一种航空地面电源性能检测与故障诊断系统的研究[D].沈阳:东北大学,2011.
[3]张文华,徐田中,李钢.变电站直流电源移动式微机检测设备[J].电源技术应用,2004,7(10):633-635.
[4]熊华刚,王中华.先进航空电子综合技术[M].北京:国防工业出版社,2009.
[5]支超有.机载数据总线技术及其应用[M].北京:国防工业出版社,2009.
[6]叶华,李彬,高培淞,等.航空相机检测仪系统的设计与实现[J].国外电子测量技术,2017,36(5):40-44.
[7]白江浩,文国军,朱振利,等.便携式辉光放电重金属检测仪的设计[J].仪表技术与传感器,2017,24(3):34-36.
[8]陈瑞森.基于AT89C52的可配置环境检测仪设计[J].智能计算机与应用,2017,7(5):129-132.
[9]邹明虎,闫军,万里波,等.基于嵌入式计算机的雷达数字拖动设备检测仪[J].兵工自动化,2017,36(10):24-28.
[10]王洪庆.基于单片机控制的煤气表密封水试自动检测仪[J].安徽电子信息职业技术学院学报,2017,16(2):8-10.
[11]周岳斌,王冬,杨凯.便携式甲醛及PM2.5检测仪设计[J].机械管理开发,2015(3):19-21.
[12]杨帅,熊德智,李建新.基于载波通信的低压用户串户检测仪的设计[J].计算机应用,2016(4):56-58.
[13]徐志刚,赵祥模,宋焕生,等.多功能混凝土超声波检测仪软件设计与实现[J].计算机应用与软件,2008,25(1):276-279.
[14]吴向臣,吴茂林,吴作栋.基于Arduino的通用型通路与绝缘性检测仪设计[J].舰船电子工程,2016,36(3):126-129.
[15]王大鹏,范惠林,陈丹强,等.基于ARM-WinCE的某型航空发动机温控盒检测仪设计[J].电子技术应用,2013,39(5):8-11.
[16]钱平,于宝成,杜玉立.基于LabVIEW的某型光电雷达随动电子部件检测仪软件设计[J].软件导刊,2017,16(9):117-119.
[17]闫保中,孟庆丹,邹银红.基于Linux Qt的无损信号检测仪人机界面软件的设计与实现[J].化工自动化及仪表,2014,41(2):134-137.
[18]张万良.基于嵌入式处理器的瓦斯检测仪设计[J].煤炭技术,2017,36(2):244-245.
[19]黄辉,张跃.脉搏血氧检测仪软件设计优化[J].计算机工程与设计,2013,34(8):2737-2742.
[20]杨珂,宋国堃,赵世平.基于多线程技术的测控系统软件设计[J].电子设计工程,2016,24(16):89-91.
[21]徐熠刚,李青,吴轶,等.远程地下水COD在线检测仪设计[J].计算机测量与控制,2017,25(11):311-315.
[22]武孝勇,张维忠,袁翠梅,等.一种基于TOF相机的人头检测算法研究[J].青岛大学学报:工程技术版,2017,32(4):42-45.
[23]邓嵘,曹恩国,王萌,等.便携式食品检测仪设计[J].机械设计,2015,32(12):126-128.
[24]蔡宇宏,王田刚,李正清,等.一种新型低温容器综合性能检测仪设计及应用[J].低温工程,2016(2):32-37.