摘要
文章讨论了如何优化机床隔振,针对目前机床隔振系统参数不可实时调整的问题,在机床隔振中引入磁敏技术,并对利用该技术如何在不同工况下调整刚度、阻尼参数更有利于隔振进行了详细的分析。与此同时,在ANSYS工作台中建立振动模型,对理论分析进行动力学分析验证。结果表明,通过这种磁敏技术实时调整机床隔振系统的刚度和阻尼值,能更多的耗散振动能量,有效的提高了隔振性能,达到精确的隔振效果。
This paper discusses how to optimize the vibration isolation of machine tools. Aiming at the problem that the parameters of the vibration isolation system of machine tools can not be adjusted in real time, magnetic sensing technology is introduced into the vibration isolation of machine tools,and how to adjust stiffness and damping parameters under different working conditions is analyzed in detail.At the same time, the vibration model is established in ANSYS workbench,and theoretical analysis is verified by dynamic analysis.The results show that by adjusting the stiffness and damping of the vibration isolation system in real time, the vibration energy can be dissipated more, the vibration isolation performance can be effectively improved, and the accurate vibration isolation effect can be achieved.
引文
[1] 夏洪春,李晓燕,尹训强.某高精密设备平台基础隔振措施分析[J].地震工程学报,2018,40(1):159-165.
[2] 茅玉泉.环境振动影响和防治[J].工程建设与设计,2002 (1):19-25.
[3] 韩志华,罗学科.机床加工过程中的振动实验研究[J].机床与液压,2007,35(2):76-79.
[4] 王正浩,张杜鹃.基于Ansys Workbench的CJ190Z4机床主轴实验模型振动力学分析[J].沈阳建筑大学学报(自然科学版),2018,34(1):141-149.
[5] 黄雪涛,王海霞,顾亮.高速压力机隔振技术研究及橡胶隔振器设计[J].机床与液压,2017,45(16):43-45.
[6] 李锐.基于磁流变液悬置的发动机隔振方法与试验研究[D].重庆:重庆大学,2009.
[7] 凌永成,于京诺.汽车电子控制技术[M].北京:北京大学出版社,2011.
[8] 靳伍银,王安,剡昌锋.机床基础振动的动力性特性[J].兰州理工大学学报,2008,34(1):37-39.
[9] 刘延柱,杨兴海,朱本华.理论力学[M].北京:高等教育出版社,2005.
[10] 刘延柱,陈立群,陈文良.振动力学[M].北京:高等教育出版社,2011.
[11] 朱大林,唐瑞,詹腾,等.随机激励下四自由度机床隔振系统的主动控制研究[J].三峡大学学报(自然科学版),2013,35(2):77-80.
[12] 胡均平,郑聪,李科军,等.精密机床的模糊PID主动隔振系统研究[J].噪音与振动控制,2015,35(4):193-197.
[13] 陈以磊,邱志慧,郭俊康,等.概念设计阶段机床基础大件质量的优化方法[J].西安交通大学学报,2017,51(7):105-114.
[14] 王加春,董申,李旦.精密机床的主动隔振系统研究[J].振动与冲击,2000,19(3):54-56.
[15] 张毅牟思惠陈怀军.并联运动机床运动学和动力学分析与仿真[J].重庆大学学报,2011,34(12):16-22.