摘要
采用热分解法、溶胶-凝胶法、沉淀法和水热法制备了CeO_2载体,SEM、XRD表征、N_2低温吸脱附和氢气程序升温还原(H2-TPR)实验和结果分析显示,溶胶-凝胶法制备样品具有更优的比表面积、孔容、孔径和氧化还原性能,故选择溶胶-凝胶法制备Ti_(0.5)Ce_(0.5)O_2混合氧化物催化载体。使用XRD、SEM、N2低温吸脱附、H2-TPR等分析手段对产物的物相特征、吸附性能和氧化还原性能进行了表征。Ti_(0.5)Ce_(0.5)O_2的H2-TPR在261、529和749℃处出现耗氢峰,分别归属于表面吸附氧的还原、表面晶格氧的还原和体相晶格氧的还原,TEM结果表明Ti4+离子进入CeO_2晶格形成TiO_2-CeO_2填隙固溶体,固溶体的形成有利于载体氧化还原能力的增强。
The CeO_2 carriers were prepared by thermal decomposition,sol-gel,precipitation and hydrothermal methods.The results of XRD and SEM analysis,N_2 adsorption-desorption isotherms and H_2-temperature-programmed reduction( H_2-TPR) patterns showed that the CeO_2 particles obtained by sol-gel method possess good specific surface area,pore volume,pore diameter,and redox performance. Therefore,The mixed oxide catalyst carrier Ce_(0.5)Ti_(0.5)O_2 was prepared by sol-gel method. The phase analysis,adsorption and redox properties of samples were investigated. The positions of hydrogen consumption peak of Ce_(0.5)Ti_(0.5)O_2H_2-TPR pattern were 261,529 and 749 ℃,attributed to adsorbed oxygen redox on the surface,lattice oxygen redox on the surface and the body phase lattice oxygen redox, respectively. The result of TEM showed that Ti~(4+)entered into the CeO_2 lattice and formed interstitial solid solution,it not only reduced the reduction temperature of CeO_2 and TiO_2,but also enhanced the redox property.
引文
[1] Teraoka Y,Kanada K,Kagawa S. Applied Catalysis B:Environmental[J],2001,34(1):73-78.
[2] Qi G S,Yang R T. Journal of Catalysis[J],2003,217(2):434-441.
[3] Atribak I,Bueno-Lopez A,Garcia-Garcia A. Journal of Catalysis[J],2008,259(1):123-132.
[4] Pengpanish S,Meeyoo V,Rirksomboon T,et al. Applied Catalysis A:General[J],2002,234(1-2):221-233.
[5] Fu Q,Weber A,Flytzani-Stephanopoulos M. Catalysis Letters[J],2001,77(1-3):87-95.
[6] Dai Q G,Wang X Y,Lu G Z. Applied Catalysis B:Environmental[J],2008,81(3):192-202.
[7] Li H F,Lu G C,Dai Q G,et al. Applied Catalysis B:Environmental[J],2011,102(3-4):475-483.
[8] Li Y X,Guo Y H,Xue B. Fuel Process Technology[J],2009,90(5):652-656.
[9] Thaicharoensutcharitham S,Meeyoo V,Kitiyanan B,et al. Catalysis Communications[J],2009,10(5):673-677.
[10] Jiang Y,Bao C Z,Liu S J,et al. Aerosol and Air Quality Research[J],2018,18:2121-2130.
[11] Vieira G B,JoséH J,Peterson M,et al. Journal of Photochemistry Photobiology A:Chemistry[J],2018,353(15):325-336.
[12] Deng X Y,Zhang H X,Guo R N,et al. Separation and Purification Technology[J],2018,193(20):264-273.
[13] Manibalan G,Murugadoss G,Thangamuthu R,et al. Journal of Alloys and Compounds[J],2019,773(30):449-461.
[14] Liu Nan(刘楠). Thesis for Doctorate(博士论文)[D]. Tianjin:Tianjin University,2014.
[15] Berger-Karin C,Sebek M,Pohl M,et al. Chem Cat Chem[J],2012,4(9):1368-1375.
[16] Schffer J,Kondratenko V A,Steinfeldt N,et al. Journal of Catalysis[J],2013,301(5):210-216.
[17] Rico-Francés S,Jardim E O,Wezendonk T. A,et al. Applied Catalysis B:Environmental[J],2016,180:169-178.
[18]近藤精一,石川达熊,安部郁夫.吸附科学[M]. Translated by Li Guoxi(李国希译). Beijing:Chemical Industry Press,2006.
[19] Sanchez M G,Gazquez J L. Journal of Catalysis[J],1987,104(1):120-135.
[20] Xu A W,Gao Y,Liu H Q. Journal of Catalysis[J],2002,207(2):151-157.
[21] Zhu Huaqing(朱华青),Qin Zhangfeng(秦张峰),Wang Jiangguo(王建国). Chinnese Journal of Catalysis(催化学报)[J],2005,26(5):377-382.
[22] Yao H C,Yu Yao Y F. Journal of Catalysis[J],1984,86(2):254-265.
[23] Li Junfeng(李俊峰). Thesis for Doctorate(博士论文)[D]. Shanghai:East China University of Science and Technology,2012:45.