线缆虚拟装配关键技术研究现状及其发展
|
摘要
线缆布线与安装是复杂机电产品设计中带有普遍性的难题,线缆的敷设质量已成为衡量产品整机性能和可靠性的一个重要指标。介绍了线缆虚拟装配的内涵和主要研究内容,重点对线缆虚拟装配涉及到的关键技术及其特点进行了分析,对比分析了国内外线缆虚拟装配的研究现状,分析和指出了线缆虚拟装配存在的问题以及发展趋势。最后对增强现实技术在线缆装配领域中的应用进行了展望。
Cable harness wiring and installation were the universal problems in the design of complex mechatronic products.The wiring quality of cable harness became an important indicator to measure the product performance and reliability.Firstly,the connotation and main research contents of cable harness virtual assembly were introduced herein.Then the key technologies and its characteristics involved to cable harness virtual assembly were analyzed especially,and a comparative analysis of research status at home and abroad was also given.The existing problems and future development trends were also presented and analyzed.Finally,the applications of augmented reality in the field of cable harness assembly were discussed.
Cable harness wiring and installation were the universal problems in the design of complex mechatronic products.The wiring quality of cable harness became an important indicator to measure the product performance and reliability.Firstly,the connotation and main research contents of cable harness virtual assembly were introduced herein.Then the key technologies and its characteristics involved to cable harness virtual assembly were analyzed especially,and a comparative analysis of research status at home and abroad was also given.The existing problems and future development trends were also presented and analyzed.Finally,the applications of augmented reality in the field of cable harness assembly were discussed.
引文
[1]Bruno A,Michel T.Design of Wire Harnesses for Mass Customization[C]//Proceedings of the 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering.Clermont-Ferrand,France,2002:1-10.
[2]刘佳顺,刘检华,王志斌,等.虚拟环境下复杂线缆的集成信息模型[J].计算机集成制造系统,2013,19(5):964-971.Liu Jiashun,Liu Jianhua,Wang Zhibin,et al.Integrated Information Model of Complex Cable Harness in Virtual Environment[J].Computer Integrated Manufacturing Systems,2013,19(5):964-971.
[3]孔瑞莲.航空发动机可靠性工程[M].北京:航空工业出版社,2006.
[4]刘检华,万毕乐,宁汝新.虚拟环境下基于离散控制点的线缆装配规划技术[J].机械工程学报,2006,42(8):125-130.Liu Jianhua,Wan Bile,Ning Ruxin.Realization Technology of Cable Harness Process Planning in Virtual Environment Based on Discrete Control Point Modeling Method[J].Chinese Journal of Mechanical Engineering,2006,42(8):125-130.
[5]Ardelean E V,Babuska V,Goodding J C,et al.Cable Effects Study:Tangents,Rabbit Holes,Dead Ends and Valuable Results[J].Journal of Spacecraft and Rockets,2012,52(2):569-583.
[6]万毕乐.虚拟环境下线缆的布线设计与装配工艺规划技术研究[D].北京:北京理工大学,2007.
[7]王金芳.基于Pro/E的线缆装配规划系统的研究与设计[D].南京:南京航空航天大学,2008.
[8]宁汝新,郑轶.虚拟装配技术的研究进展及发展趋势分析[J].中国机械工程,2005,16(15):1398-1404.Ning Ruxin,Zheng Yi.Analysis on Recent Study Progresses and Trends of Virtual Assembly Technology[J].China Mechanical Engineering,2005,16(15):1398-1404.
[9]刘检华,万毕乐,孙刚,等.线缆虚拟布线与敷设过程仿真技术[J].计算机集成制造系统,2012,18(4):787-795.Liu Jianhua,Wan Bile,Sun Gang,et al.Cable Harness Virtual Wiring and Assembly Process Simulation Technology[J].Computer Integrated Manufacturing Systems,2012,18(4):787-795.
[10]Zhu D,Latombe J C.Pipe Routing=Path Planning(with Many Constraints)[C]//Proceedings of the 1991IEEE International Conference on Robotics and Automation.Sacramento,1991:1940-1947.
[11]Conru A B.A Genetic Approach to the Cable Harness Routing Problem[C]//Proceedings of the IEEE Conference on Evolutionary Computation.Orlando,1994:200-205.
[12]Andrew B,Conru,Cutkosky M R.Computational Support for Interactive Cable Harness Routing and Design[C]//Proceedings of the 19th Annual ASME Design Automation Conference.Albuquerque,USA,1993:551-558.
[13]Ilknur K,Russell G,Ming L,et al.Cable Route Planning in Complex Environments Using Constrained Sampling[C]//2007 ACM Solid and Physical Modeling Symposium(SPM’2007).New York,2007:395-402.
[14]吴银锋,吴兆华,李春泉.电子整机三维自动布线技术研究[J].电讯技术,2005(2):76-81.Wu Yinfeng,Wu Zhaohua,Li Chunquan.3D Autorouting Technology of Electronic Equipment[J].Telecommunication Engineering,2005(2):76-81.
[15]付宜利,封海波,孙建勋,等.基于混沌算法的机电产品管线自动敷设研究[J].计算机集成制造系统,2007,13(3):497-501.Fu Yili,Feng Haibo,Sun Jianxun,et al.Auto-routing of Electromechanical Products Based on Chaos Algorithm[J].Computer Integrated Manufacturing Systems,2007,13(3):497-501.
[16]韩明晶.基于A*算法的电子制造装备布线研究[D].武汉:华中科技大学,2009.
[17]刘振宇,周德俭,吴兆华,等.一种面向电子整机的三维布线算法研究与实现[J].电子工艺技术,2010,31(1):6-8.Liu Zhenyu,Zhou Dejian,Wu Zhaohua,et al.Study and Implementation of the Three-dimensional(3D)Wiring Algorithm of Electronic Complete Machine[J].Electronics Process Technology,2010,31(1):6-8.
[18]Robinson G,Ritchie J M,Day P N,et al.System Design and User Evaluation of Co-Star:An Immersive Stereoscopic System for Cable Harness Design[J].Computer-Aided Design,2007,39(4):245-257.
[19]原彬,熊伟,王祖温.电缆虚拟装配的关键技术及其发展[J].机械科学与技术,2010,29(5):695-700.Yuan Bin,Xiong Wei,Wang Zuwen.A Review of the Key Techniques of Virtual Assembly for Cable Harness[J].Mechanical Science and Technology for Aerospace Engineering,2010,29(5):695-700.
[20]Carmigniani J,Furht B,Anisetti M,et al.Augmented Reality Technologies,Systems and Applications[J].Multimedia Tools and Applications,2011,51(1):341-377.
[21]Caudell T P,Mizell D W.Augmented Reality:an Application of Heads-up Display Technology to Manual Manufacturing Processes[C]//Proceedings of the Twenty-fifth Hawaii International Conference on System Sciences.Washington D.C.,1992:659-669.
[22]Hisup P,Lee S H,Mark R,et al.Computational Support for Concurrent Engineering of Cable Harnesses[C]//Proceedings of the 1992ASME International Computers in Engineering Conference and Exposition.New York,1992:261-268.
[23]Catherine C,Aline C,Xavier B,et al.A Decision Support System for a Concurrent Design of Cable Harnesses:Conceptual Approach and Implementation[J].Concurrent Engineering:Research and Applications,1998,6(1):43-52.
[24]Ng F M,Ritchie J M,Simmons J E L,et al.Designing Cable Harness Assemblies in Virtual Environments[J].Journal of Materials Processing Technology,2000,107:37-43.
[25]Holt P O’B,Ritchie J M,Day P N,et al.Immersive Virtual Reality in Cable and Pipe Routing:Design Metaphors and Cognitive Ergonomics[J].Journal of Computing and Information Science in Engineering,2004,4:161-170.
[26]万毕乐,宁汝新,刘检华,等.虚拟环境中线缆建模及布线的研究与实现[J].中国机械工程,2006,17(20):2135-2139.Wan Bile,Ning Ruxin,Liu Jianhua,et al.Research and Realization on Cable Harness Modeling and Route Planning in Virtual Environment[J].China Mechanical Engineering,2006,17(20):2135-2139.
[27]高纪开达,刘检华,宁汝新,等.虚拟环境下线缆建模及装配规划技术的研究[J].系统仿真学报,2005,17(4):933-935.Gao Jikaida,Liu Jianhua,Ning Ruxin,et al.Research on Cable Harness Modeling and Assembly Planning in Virtual Environment[J].Journal of System Simulation,2005,17(4):933-935.
[28]魏发远.基于虚拟样机和粒子系统仿真技术的虚拟布线方法[J].工程设计学报,2005,12(4):208-212.Wei Fayuan.Virtual Wiring of Cables Based on Virtual Prototyping and Particle System Simulation[J].Journal of Engineering Design,2005,12(4):208-212.
[29]魏发远,陈新发,王峰军.电缆虚拟布线及其逆运动学仿真[J].计算机辅助设计与图形学学报,2006,18(10):1623-1627.Wei Fayuan,Chen Xinfa,Wang Fengjun.Virtual Wiring and Simulation of Cable Layout with Inverse Kinematics[J].Journal of Computer-Aided Design&Computer Graphics,2006,18(10):1623-1627.
[30]高曙,陈定方.基于多Agent的分布式虚拟设计/制造系统研究[J].计算机工程与应用,2002,38(22):227-228.Gao Shu,Chen Dingfang.The Research on the Distributed Virtual Design/manufacture System Based on the Multi-agent[J].Computer Engineering and Applications,2002,38(22):227-228.
[31]有人,陈定方.虚拟现实环境中的物理模拟及物理引擎应用的研究[J].湖北工业大学学报,2008,23(2):7-9,22.You Ren,Chen Dingfang.Research on Physical Simulation and Application of Physical Engine in Virtual Environment[J].Journal of Hubei University of Technology,2008,23(2):7-9,22.
[32]唐秋华,陈定方,孔建益,等.基于WTK的虚拟装配系统研究[J].武汉理工大学学报(交通科学与工程版),2005,29(2):323-326.Tang Qiuhua,Chen Dingfang,Kong Jianyi,et al.Research on Virtual Assembly System Based on WTK[J].Journal of Wuhan University of Technology(Transportation Science&Engineering),2005,29(2):323-326.
[33]陈定方.五彩缤纷的虚拟现实世界[M].北京:中国水利水电出版社,2015.
[34]陈定方,罗亚波.虚拟设计[M].2版.北京:机械工业出版社,2007.
[35]Michel C,Ying Y,Nadia M T,et al.Dressing Animated Synthetic Actors with Complex Deformable Clothes[J].Computer Graphics,1992,26(2):99-104.
[36]Hidehiko O,Haruki I,Takako T,et al.Three Dimensional Apparel CAD System[J].Computer Graphics,1992,26(2):105-110.
[37]Wolter J,Kpoll E.Toward Assembly Sequence Planning with Flexible Parts[C]//IEEE International Conference on Robotics and Automation.Minneapolis,1996:1517-1524.
[38]Loock A,Schomer E.Physically Based Cables for Assembly Simulation in Virtual Reality[C]//Proceedings of the 13th European Simulation Symposium 2001.Ghent,Belgium,2001:294-297.
[39]Hergenrother E,Dahne P.Real-time Virtual Cables Based on Kinematics Simulation[C]//Proceedings of the WSCG 2000.Pilzěn,Czech Republic,2000:402-409.
[40]Demetri T,John P,Alan B,et al.Elastically Deformable Models[J].Computer Graphics,1987,21(4):205-214.
[41]Klimowicz A N F,Mihajlovic M D.Modelling 3D Semi-deformable Tubes in Real Time[J].Applied Mathematics and Computation,2007,184:52-62.
[42]Andreu A,Gil L,Roca P.A New Deformable Catenary Element for the Analysis of Cable Net Structures[J].Computers and Structures(S0045-7949),2006,84(8):1882-1890.
[43]Yang M G,Chen Z Q,Hua X G.A New Twonode Catenary Cable Element for the Geometrically Non-linear Analysis of Cable-supported Structures[J].Journal of Mechanical Engineering Science(S0954-4062),2009,224(10):1173-1183.
[44]Yang Y B,Tsay J Y.Geometric Nonlinear Analysis of Cable Structures with a Two-node Cable Element by Generalized Displacement Control Method[J].International Journal of Structural Stability and Dynamics,2007,7(4):571-588.
[45]Nikitin I,Nikitina L,Frolov P,et al.Real-time Simulation of Elastic Objects in Virtual Environments Using Finite Element Method and Precomputed Green’s Functions[C]//Proceedings of the Workshop on Virtual Environments,Eurographics Association.Aire-la-Ville,Switzerland,2002:47-52.
[46]Kaufmann P,Martin S,Botsch M,et al.Flexible Simulation of Deformable Models Using Discontinuous Galerkin FEM[J].Graphical Models,2009,71(4):153-167.
[47]Terzopoulos D,Qin H.Dynamic NURBS with Geometric Constraints for Interactive Sculpting[J].ACM Transactions on Graphics,1994,13(2):103-136.
[48]王志斌.虚拟环境下基于物理属性的线缆布局与装配仿真技术[D].北京:北京理工大学,2014.
[49]朱心雄.自由曲线曲面造型技术[M].北京:科学出版社,2000.
[50]刘延柱,薛纭.基于精确Cosserat模型的螺旋杆稳定性分析[J].应用数学和力学,2011,32(5):570-578.Liu Yanzhu,Xue Yun.Stability Analysis of a Helical Rod Based on Exact Cosserat’s Model[J].Applied Mathematics and Mechanics,2011,32(5):570-578.
[51]薛纭,刘延柱,陈立群.Kirchhoff弹性杆动力学建模的分析力学方法[J].物理学报,2006,55(8):3845-3851.Xue Yun,Liu Yanzhu,Chen Liqun.Methods of Analytical Mechanics for Dynamics of the Kirchhoff Elastic Rod[J].Acta Physica Sinica,2006,55(8):3845-3851.
[52]Spillmann J,Teschner M.CoRdE:Cosserat Rod Elements for the Dynamic Simulation of One-dimensional Elastic Objects[C]//Proceedings of the2007ACM SIGGRAPH/Eurographics Symposium on Computer Animation.Aire-la-Ville,Switzerland,2007:63-72.
[53]Bergou M,Wardetzky M,Robinson S,et al.Discrete Elastic Rods[J].ACM Transactions on Graphics(TOG),2008,27(3):63.
[54]刘检华,赵涛,王春生,等.虚拟环境下的活动线缆物理特性建模与运动仿真技术[J].机械工程学报,2011,47(9):117-124.Liu Jianhua,Zhao Tao,Wang Chunsheng,et al.Motional Cable Harness Physical Characteristic Oriented Modeling and Kinetic Simulation Technology in Virtual Environment[J].Journal of Mechanical Engineering,2011,47(9):117-124.
[55]杨琳,朱元昌,邸彦强.基于Virtools的柔性线缆建模及其运动仿真[J].微电子学与计算机,2009,26(9):153-156.Yang Lin,Zhu Yuanchuang,Di Yanqiang.Flexible Cable Modeling and Movement Emulation Based on Virtools[J].Microelectronics&Computer,2009,26(9):153-156.
[56]张永涛,闫静,左敦稳,等.悬挂约束下线缆装配仿真建模[J].系统仿真学报,2013,25(7):1513-1517.Zhang Yongtao,Yan Jing,Zuo Dunwen,et al.Cable Assembly Simulation Modeling under Suspended Condition[J].Journal of System Simulation,2013,25(7):1513-1517.
[57]魏迎梅,王涌,吴泉源,等.碰撞检测中的固定方向凸包包围盒的研究[J].软件学报,2001,12(7):1056-1063.Wei Yingmei,Wang Yong,Wu Quanyuan,et al.Research on Fixed Direction Hull Bounding Volume in Collision Detection[J].Journal of Software,2001,12(7):1056-1063.
[58]邹益胜,丁国富,许明恒,等.实时碰撞检测算法综述[J].计算机应用研究,2008,25(1):8-12.Zou Yisheng,Ding Guofu,Xu Mingheng,et al.Survey on Real-time Collision Detection Algorithms[J].Application Research of Computers,2008,25(1):8-12.
[59]王志强,洪嘉振,杨辉.碰撞检测问题研究综述[J].软件学报,1999,5(10):545-551.Wang Zhiqiang,Hong Jiazhen,Yang Hui.A Survey of Collision Detection Problem[J].Journal of Software,1999,5(10):545-551.
[60]Jimenez P,Thomas F,Torras C.3DCollision Detection:a Survey[J].Computers and Graphics,2001,25(2):269-285.
[61]刘晓平,翁晓毅,陈皓,等.运用改进的八叉树算法实现精确碰撞检测[J].计算机辅助设计与图形学学报,2005,17(12):2631-2635.Liu Xiaoping,Weng Xiaoyi,Chen Hao,et al.An Improved Algorithm for Octree-based Exact Collision Detection[J].Journal of Computer-Aided Design&Computer Graphics,2005,17(12):2631-2635.
[62]Naylor B,Amatodes J A,Thibault W.Merging BSP Trees Yields Polyhedral Set Operations[C]//Proceedings of the 17th Annual Conference on Computer Graphics and Interactive Techniques.New York,1990:115-124.
[63]Jonathan D C,Ming C L,Dinesh M,et al.I-COLLIDE:An Interactive and Exact Collision Detection System for Large Scale Environments[C]//Proceedings of the 1995Symposium on Interactive3DGraphics.New York,1995:189-196.
[64]范昭炜.实时碰撞检测技术研究[D].杭州:浙江大学,2003.
[65]Stephhen J,Adelson,Larry F,et al.Generating Exact Ray-traced Animation Frames by Reprojection[J].IEEE Computer Graphics and Application,1995,15(3):43-52.
[66]Goldsmith J,Salmon J.Automatic Creation of Object Hierarchies for Ray Tracing[J].IEEE Computer Graphics and Application,1987,11(1):14-20.
[67]魏迎梅,王涌,吴泉源,等.碰撞检测中的层次包围盒方法[J].计算机应用,2000,20(增):241-244.Wei Yinghai,Wang Yong,Wu Quanyuan,et al.A Hierarchical Bounding Box Method of Collision Detection[J].Computer Applications,2000,20(S):241-244.
[68]邹益胜,丁国富,周晓莉,等.一种基于图像空间的碰撞检测算法[J].系统仿真学报,2011,23(5):944-949.Zou Yisheng,Ding Guofu,Zhou Xiaoli,et al.Collision Detection Algorithm Based on Image Space[J].Journal of System Simulation,2011,23(5):944-949.
[69]万毕乐,宁汝新,刘检华,等.虚拟环境下的线缆装配建模技术研究[J].系统仿真学报,2006,18(增1):267-270.Wan Bile,Ning Ruxin,Liu Jianhua,et al.Research on Cable Harness Assembly Modeling Technology in Virtual Environment[J].Journal of System Simulation,2006,18(S1):267-270.
[70]李蕴奇.基于可变形物体的碰撞检测算法[J].吉林大学学报(信息科学版),2012,30(3):321-326.Li Yunqi.Collision Detection Algorithm for Deformable Objects[J].Journal of Jilin University(Information Science Edition),2012,30(3):321-326.
[71]谢世富,马立元,刘鹏远,等.可变形线性体仿真中的碰撞检测算法研究与实现[J].系统仿真学报,2013,25(9):2177-2183.Xie Shifu,Ma Liyuan,Liu Pengyuan,et al.Research and Realization of Collision Detection Method Used in Deformable Linear Object Simulation[J].Journal of System Simulation,2013,25(9):2177-2183.
[72]刘翊.刚柔混合产品的装配工艺规划技术与应用研究[D].武汉:华中科技大学,2014.
[73]刘检华,宁汝新,万毕乐,等.面向虚拟装配的复杂产品装配路径规划技术研究[J].系统仿真学报,2007,19(9):2003-2007.Liu Jianhua,Ning Ruxin,Wan Bile,et al.Research on Complex Product Assembly Path Planning in Virtual Assembly[J].Journal of System Simulation,2007,19(9):2003-2007.
[74]张丹.航天产品虚拟装配工艺设计技术及其应用基础研究[D].南京:南京航空航天大学,2010.
[75]Shang W,Liu J H,Ning R X,et al.Computational Path Planner for Product Assembly in Complex Environment[J].Chinese Journal of Mechanical Engineering,2013,26(2):282-292.
[76]王志斌,刘检华,刘佳顺,等.面向电缆虚拟装配仿真的多分支弹簧质点模型[J].机械工程学报,2014,50(3):174-183.Wang Zhibin,Liu Jianhua,Liu Jiashun,et al.A Multi-branch Mass-spring Model for Virtual Assembly of Cable Harness[J].Journal of Mechanical Engineering,2014,50(3):174-183.
[77]Grigore B,Philippe C.Review:Virtual Reality Technology[M].2nd ed.Malden,Massachusetts,USA:Wiley-IEEE Press,2003.
[78]彭涛,李世其,王峻峰,等.基于增强人机交互技术的虚拟装配[J].计算机辅助设计与图形学学报,2009,21(3):354-361.Peng Tao,Li Shiqi,Wang Junfeng,et al.Virtual Assembly Based on Augmented Human-computer Interaction Technology[J].Journal of ComputerAided Design&Computer Graphics,2009,21(3):354-361.
[2]刘佳顺,刘检华,王志斌,等.虚拟环境下复杂线缆的集成信息模型[J].计算机集成制造系统,2013,19(5):964-971.Liu Jiashun,Liu Jianhua,Wang Zhibin,et al.Integrated Information Model of Complex Cable Harness in Virtual Environment[J].Computer Integrated Manufacturing Systems,2013,19(5):964-971.
[3]孔瑞莲.航空发动机可靠性工程[M].北京:航空工业出版社,2006.
[4]刘检华,万毕乐,宁汝新.虚拟环境下基于离散控制点的线缆装配规划技术[J].机械工程学报,2006,42(8):125-130.Liu Jianhua,Wan Bile,Ning Ruxin.Realization Technology of Cable Harness Process Planning in Virtual Environment Based on Discrete Control Point Modeling Method[J].Chinese Journal of Mechanical Engineering,2006,42(8):125-130.
[5]Ardelean E V,Babuska V,Goodding J C,et al.Cable Effects Study:Tangents,Rabbit Holes,Dead Ends and Valuable Results[J].Journal of Spacecraft and Rockets,2012,52(2):569-583.
[6]万毕乐.虚拟环境下线缆的布线设计与装配工艺规划技术研究[D].北京:北京理工大学,2007.
[7]王金芳.基于Pro/E的线缆装配规划系统的研究与设计[D].南京:南京航空航天大学,2008.
[8]宁汝新,郑轶.虚拟装配技术的研究进展及发展趋势分析[J].中国机械工程,2005,16(15):1398-1404.Ning Ruxin,Zheng Yi.Analysis on Recent Study Progresses and Trends of Virtual Assembly Technology[J].China Mechanical Engineering,2005,16(15):1398-1404.
[9]刘检华,万毕乐,孙刚,等.线缆虚拟布线与敷设过程仿真技术[J].计算机集成制造系统,2012,18(4):787-795.Liu Jianhua,Wan Bile,Sun Gang,et al.Cable Harness Virtual Wiring and Assembly Process Simulation Technology[J].Computer Integrated Manufacturing Systems,2012,18(4):787-795.
[10]Zhu D,Latombe J C.Pipe Routing=Path Planning(with Many Constraints)[C]//Proceedings of the 1991IEEE International Conference on Robotics and Automation.Sacramento,1991:1940-1947.
[11]Conru A B.A Genetic Approach to the Cable Harness Routing Problem[C]//Proceedings of the IEEE Conference on Evolutionary Computation.Orlando,1994:200-205.
[12]Andrew B,Conru,Cutkosky M R.Computational Support for Interactive Cable Harness Routing and Design[C]//Proceedings of the 19th Annual ASME Design Automation Conference.Albuquerque,USA,1993:551-558.
[13]Ilknur K,Russell G,Ming L,et al.Cable Route Planning in Complex Environments Using Constrained Sampling[C]//2007 ACM Solid and Physical Modeling Symposium(SPM’2007).New York,2007:395-402.
[14]吴银锋,吴兆华,李春泉.电子整机三维自动布线技术研究[J].电讯技术,2005(2):76-81.Wu Yinfeng,Wu Zhaohua,Li Chunquan.3D Autorouting Technology of Electronic Equipment[J].Telecommunication Engineering,2005(2):76-81.
[15]付宜利,封海波,孙建勋,等.基于混沌算法的机电产品管线自动敷设研究[J].计算机集成制造系统,2007,13(3):497-501.Fu Yili,Feng Haibo,Sun Jianxun,et al.Auto-routing of Electromechanical Products Based on Chaos Algorithm[J].Computer Integrated Manufacturing Systems,2007,13(3):497-501.
[16]韩明晶.基于A*算法的电子制造装备布线研究[D].武汉:华中科技大学,2009.
[17]刘振宇,周德俭,吴兆华,等.一种面向电子整机的三维布线算法研究与实现[J].电子工艺技术,2010,31(1):6-8.Liu Zhenyu,Zhou Dejian,Wu Zhaohua,et al.Study and Implementation of the Three-dimensional(3D)Wiring Algorithm of Electronic Complete Machine[J].Electronics Process Technology,2010,31(1):6-8.
[18]Robinson G,Ritchie J M,Day P N,et al.System Design and User Evaluation of Co-Star:An Immersive Stereoscopic System for Cable Harness Design[J].Computer-Aided Design,2007,39(4):245-257.
[19]原彬,熊伟,王祖温.电缆虚拟装配的关键技术及其发展[J].机械科学与技术,2010,29(5):695-700.Yuan Bin,Xiong Wei,Wang Zuwen.A Review of the Key Techniques of Virtual Assembly for Cable Harness[J].Mechanical Science and Technology for Aerospace Engineering,2010,29(5):695-700.
[20]Carmigniani J,Furht B,Anisetti M,et al.Augmented Reality Technologies,Systems and Applications[J].Multimedia Tools and Applications,2011,51(1):341-377.
[21]Caudell T P,Mizell D W.Augmented Reality:an Application of Heads-up Display Technology to Manual Manufacturing Processes[C]//Proceedings of the Twenty-fifth Hawaii International Conference on System Sciences.Washington D.C.,1992:659-669.
[22]Hisup P,Lee S H,Mark R,et al.Computational Support for Concurrent Engineering of Cable Harnesses[C]//Proceedings of the 1992ASME International Computers in Engineering Conference and Exposition.New York,1992:261-268.
[23]Catherine C,Aline C,Xavier B,et al.A Decision Support System for a Concurrent Design of Cable Harnesses:Conceptual Approach and Implementation[J].Concurrent Engineering:Research and Applications,1998,6(1):43-52.
[24]Ng F M,Ritchie J M,Simmons J E L,et al.Designing Cable Harness Assemblies in Virtual Environments[J].Journal of Materials Processing Technology,2000,107:37-43.
[25]Holt P O’B,Ritchie J M,Day P N,et al.Immersive Virtual Reality in Cable and Pipe Routing:Design Metaphors and Cognitive Ergonomics[J].Journal of Computing and Information Science in Engineering,2004,4:161-170.
[26]万毕乐,宁汝新,刘检华,等.虚拟环境中线缆建模及布线的研究与实现[J].中国机械工程,2006,17(20):2135-2139.Wan Bile,Ning Ruxin,Liu Jianhua,et al.Research and Realization on Cable Harness Modeling and Route Planning in Virtual Environment[J].China Mechanical Engineering,2006,17(20):2135-2139.
[27]高纪开达,刘检华,宁汝新,等.虚拟环境下线缆建模及装配规划技术的研究[J].系统仿真学报,2005,17(4):933-935.Gao Jikaida,Liu Jianhua,Ning Ruxin,et al.Research on Cable Harness Modeling and Assembly Planning in Virtual Environment[J].Journal of System Simulation,2005,17(4):933-935.
[28]魏发远.基于虚拟样机和粒子系统仿真技术的虚拟布线方法[J].工程设计学报,2005,12(4):208-212.Wei Fayuan.Virtual Wiring of Cables Based on Virtual Prototyping and Particle System Simulation[J].Journal of Engineering Design,2005,12(4):208-212.
[29]魏发远,陈新发,王峰军.电缆虚拟布线及其逆运动学仿真[J].计算机辅助设计与图形学学报,2006,18(10):1623-1627.Wei Fayuan,Chen Xinfa,Wang Fengjun.Virtual Wiring and Simulation of Cable Layout with Inverse Kinematics[J].Journal of Computer-Aided Design&Computer Graphics,2006,18(10):1623-1627.
[30]高曙,陈定方.基于多Agent的分布式虚拟设计/制造系统研究[J].计算机工程与应用,2002,38(22):227-228.Gao Shu,Chen Dingfang.The Research on the Distributed Virtual Design/manufacture System Based on the Multi-agent[J].Computer Engineering and Applications,2002,38(22):227-228.
[31]有人,陈定方.虚拟现实环境中的物理模拟及物理引擎应用的研究[J].湖北工业大学学报,2008,23(2):7-9,22.You Ren,Chen Dingfang.Research on Physical Simulation and Application of Physical Engine in Virtual Environment[J].Journal of Hubei University of Technology,2008,23(2):7-9,22.
[32]唐秋华,陈定方,孔建益,等.基于WTK的虚拟装配系统研究[J].武汉理工大学学报(交通科学与工程版),2005,29(2):323-326.Tang Qiuhua,Chen Dingfang,Kong Jianyi,et al.Research on Virtual Assembly System Based on WTK[J].Journal of Wuhan University of Technology(Transportation Science&Engineering),2005,29(2):323-326.
[33]陈定方.五彩缤纷的虚拟现实世界[M].北京:中国水利水电出版社,2015.
[34]陈定方,罗亚波.虚拟设计[M].2版.北京:机械工业出版社,2007.
[35]Michel C,Ying Y,Nadia M T,et al.Dressing Animated Synthetic Actors with Complex Deformable Clothes[J].Computer Graphics,1992,26(2):99-104.
[36]Hidehiko O,Haruki I,Takako T,et al.Three Dimensional Apparel CAD System[J].Computer Graphics,1992,26(2):105-110.
[37]Wolter J,Kpoll E.Toward Assembly Sequence Planning with Flexible Parts[C]//IEEE International Conference on Robotics and Automation.Minneapolis,1996:1517-1524.
[38]Loock A,Schomer E.Physically Based Cables for Assembly Simulation in Virtual Reality[C]//Proceedings of the 13th European Simulation Symposium 2001.Ghent,Belgium,2001:294-297.
[39]Hergenrother E,Dahne P.Real-time Virtual Cables Based on Kinematics Simulation[C]//Proceedings of the WSCG 2000.Pilzěn,Czech Republic,2000:402-409.
[40]Demetri T,John P,Alan B,et al.Elastically Deformable Models[J].Computer Graphics,1987,21(4):205-214.
[41]Klimowicz A N F,Mihajlovic M D.Modelling 3D Semi-deformable Tubes in Real Time[J].Applied Mathematics and Computation,2007,184:52-62.
[42]Andreu A,Gil L,Roca P.A New Deformable Catenary Element for the Analysis of Cable Net Structures[J].Computers and Structures(S0045-7949),2006,84(8):1882-1890.
[43]Yang M G,Chen Z Q,Hua X G.A New Twonode Catenary Cable Element for the Geometrically Non-linear Analysis of Cable-supported Structures[J].Journal of Mechanical Engineering Science(S0954-4062),2009,224(10):1173-1183.
[44]Yang Y B,Tsay J Y.Geometric Nonlinear Analysis of Cable Structures with a Two-node Cable Element by Generalized Displacement Control Method[J].International Journal of Structural Stability and Dynamics,2007,7(4):571-588.
[45]Nikitin I,Nikitina L,Frolov P,et al.Real-time Simulation of Elastic Objects in Virtual Environments Using Finite Element Method and Precomputed Green’s Functions[C]//Proceedings of the Workshop on Virtual Environments,Eurographics Association.Aire-la-Ville,Switzerland,2002:47-52.
[46]Kaufmann P,Martin S,Botsch M,et al.Flexible Simulation of Deformable Models Using Discontinuous Galerkin FEM[J].Graphical Models,2009,71(4):153-167.
[47]Terzopoulos D,Qin H.Dynamic NURBS with Geometric Constraints for Interactive Sculpting[J].ACM Transactions on Graphics,1994,13(2):103-136.
[48]王志斌.虚拟环境下基于物理属性的线缆布局与装配仿真技术[D].北京:北京理工大学,2014.
[49]朱心雄.自由曲线曲面造型技术[M].北京:科学出版社,2000.
[50]刘延柱,薛纭.基于精确Cosserat模型的螺旋杆稳定性分析[J].应用数学和力学,2011,32(5):570-578.Liu Yanzhu,Xue Yun.Stability Analysis of a Helical Rod Based on Exact Cosserat’s Model[J].Applied Mathematics and Mechanics,2011,32(5):570-578.
[51]薛纭,刘延柱,陈立群.Kirchhoff弹性杆动力学建模的分析力学方法[J].物理学报,2006,55(8):3845-3851.Xue Yun,Liu Yanzhu,Chen Liqun.Methods of Analytical Mechanics for Dynamics of the Kirchhoff Elastic Rod[J].Acta Physica Sinica,2006,55(8):3845-3851.
[52]Spillmann J,Teschner M.CoRdE:Cosserat Rod Elements for the Dynamic Simulation of One-dimensional Elastic Objects[C]//Proceedings of the2007ACM SIGGRAPH/Eurographics Symposium on Computer Animation.Aire-la-Ville,Switzerland,2007:63-72.
[53]Bergou M,Wardetzky M,Robinson S,et al.Discrete Elastic Rods[J].ACM Transactions on Graphics(TOG),2008,27(3):63.
[54]刘检华,赵涛,王春生,等.虚拟环境下的活动线缆物理特性建模与运动仿真技术[J].机械工程学报,2011,47(9):117-124.Liu Jianhua,Zhao Tao,Wang Chunsheng,et al.Motional Cable Harness Physical Characteristic Oriented Modeling and Kinetic Simulation Technology in Virtual Environment[J].Journal of Mechanical Engineering,2011,47(9):117-124.
[55]杨琳,朱元昌,邸彦强.基于Virtools的柔性线缆建模及其运动仿真[J].微电子学与计算机,2009,26(9):153-156.Yang Lin,Zhu Yuanchuang,Di Yanqiang.Flexible Cable Modeling and Movement Emulation Based on Virtools[J].Microelectronics&Computer,2009,26(9):153-156.
[56]张永涛,闫静,左敦稳,等.悬挂约束下线缆装配仿真建模[J].系统仿真学报,2013,25(7):1513-1517.Zhang Yongtao,Yan Jing,Zuo Dunwen,et al.Cable Assembly Simulation Modeling under Suspended Condition[J].Journal of System Simulation,2013,25(7):1513-1517.
[57]魏迎梅,王涌,吴泉源,等.碰撞检测中的固定方向凸包包围盒的研究[J].软件学报,2001,12(7):1056-1063.Wei Yingmei,Wang Yong,Wu Quanyuan,et al.Research on Fixed Direction Hull Bounding Volume in Collision Detection[J].Journal of Software,2001,12(7):1056-1063.
[58]邹益胜,丁国富,许明恒,等.实时碰撞检测算法综述[J].计算机应用研究,2008,25(1):8-12.Zou Yisheng,Ding Guofu,Xu Mingheng,et al.Survey on Real-time Collision Detection Algorithms[J].Application Research of Computers,2008,25(1):8-12.
[59]王志强,洪嘉振,杨辉.碰撞检测问题研究综述[J].软件学报,1999,5(10):545-551.Wang Zhiqiang,Hong Jiazhen,Yang Hui.A Survey of Collision Detection Problem[J].Journal of Software,1999,5(10):545-551.
[60]Jimenez P,Thomas F,Torras C.3DCollision Detection:a Survey[J].Computers and Graphics,2001,25(2):269-285.
[61]刘晓平,翁晓毅,陈皓,等.运用改进的八叉树算法实现精确碰撞检测[J].计算机辅助设计与图形学学报,2005,17(12):2631-2635.Liu Xiaoping,Weng Xiaoyi,Chen Hao,et al.An Improved Algorithm for Octree-based Exact Collision Detection[J].Journal of Computer-Aided Design&Computer Graphics,2005,17(12):2631-2635.
[62]Naylor B,Amatodes J A,Thibault W.Merging BSP Trees Yields Polyhedral Set Operations[C]//Proceedings of the 17th Annual Conference on Computer Graphics and Interactive Techniques.New York,1990:115-124.
[63]Jonathan D C,Ming C L,Dinesh M,et al.I-COLLIDE:An Interactive and Exact Collision Detection System for Large Scale Environments[C]//Proceedings of the 1995Symposium on Interactive3DGraphics.New York,1995:189-196.
[64]范昭炜.实时碰撞检测技术研究[D].杭州:浙江大学,2003.
[65]Stephhen J,Adelson,Larry F,et al.Generating Exact Ray-traced Animation Frames by Reprojection[J].IEEE Computer Graphics and Application,1995,15(3):43-52.
[66]Goldsmith J,Salmon J.Automatic Creation of Object Hierarchies for Ray Tracing[J].IEEE Computer Graphics and Application,1987,11(1):14-20.
[67]魏迎梅,王涌,吴泉源,等.碰撞检测中的层次包围盒方法[J].计算机应用,2000,20(增):241-244.Wei Yinghai,Wang Yong,Wu Quanyuan,et al.A Hierarchical Bounding Box Method of Collision Detection[J].Computer Applications,2000,20(S):241-244.
[68]邹益胜,丁国富,周晓莉,等.一种基于图像空间的碰撞检测算法[J].系统仿真学报,2011,23(5):944-949.Zou Yisheng,Ding Guofu,Zhou Xiaoli,et al.Collision Detection Algorithm Based on Image Space[J].Journal of System Simulation,2011,23(5):944-949.
[69]万毕乐,宁汝新,刘检华,等.虚拟环境下的线缆装配建模技术研究[J].系统仿真学报,2006,18(增1):267-270.Wan Bile,Ning Ruxin,Liu Jianhua,et al.Research on Cable Harness Assembly Modeling Technology in Virtual Environment[J].Journal of System Simulation,2006,18(S1):267-270.
[70]李蕴奇.基于可变形物体的碰撞检测算法[J].吉林大学学报(信息科学版),2012,30(3):321-326.Li Yunqi.Collision Detection Algorithm for Deformable Objects[J].Journal of Jilin University(Information Science Edition),2012,30(3):321-326.
[71]谢世富,马立元,刘鹏远,等.可变形线性体仿真中的碰撞检测算法研究与实现[J].系统仿真学报,2013,25(9):2177-2183.Xie Shifu,Ma Liyuan,Liu Pengyuan,et al.Research and Realization of Collision Detection Method Used in Deformable Linear Object Simulation[J].Journal of System Simulation,2013,25(9):2177-2183.
[72]刘翊.刚柔混合产品的装配工艺规划技术与应用研究[D].武汉:华中科技大学,2014.
[73]刘检华,宁汝新,万毕乐,等.面向虚拟装配的复杂产品装配路径规划技术研究[J].系统仿真学报,2007,19(9):2003-2007.Liu Jianhua,Ning Ruxin,Wan Bile,et al.Research on Complex Product Assembly Path Planning in Virtual Assembly[J].Journal of System Simulation,2007,19(9):2003-2007.
[74]张丹.航天产品虚拟装配工艺设计技术及其应用基础研究[D].南京:南京航空航天大学,2010.
[75]Shang W,Liu J H,Ning R X,et al.Computational Path Planner for Product Assembly in Complex Environment[J].Chinese Journal of Mechanical Engineering,2013,26(2):282-292.
[76]王志斌,刘检华,刘佳顺,等.面向电缆虚拟装配仿真的多分支弹簧质点模型[J].机械工程学报,2014,50(3):174-183.Wang Zhibin,Liu Jianhua,Liu Jiashun,et al.A Multi-branch Mass-spring Model for Virtual Assembly of Cable Harness[J].Journal of Mechanical Engineering,2014,50(3):174-183.
[77]Grigore B,Philippe C.Review:Virtual Reality Technology[M].2nd ed.Malden,Massachusetts,USA:Wiley-IEEE Press,2003.
[78]彭涛,李世其,王峻峰,等.基于增强人机交互技术的虚拟装配[J].计算机辅助设计与图形学学报,2009,21(3):354-361.Peng Tao,Li Shiqi,Wang Junfeng,et al.Virtual Assembly Based on Augmented Human-computer Interaction Technology[J].Journal of ComputerAided Design&Computer Graphics,2009,21(3):354-361.