基于Deform-3D旋锻轴径向进给参数仿真

详细信息    查看全文 | 推荐本文 |

英文篇名：Simulation of Radial Feed Parameters Based on Deform-3D Swaging Shaft 作者：刘杨 英文作者：Liu Yang;University of Shanghai for Science and Technology; 关键词：径向进给 ; Deform-3D ; 有限元仿真 ; 中间轴 英文关键词：Radial feed;;Deform-3D;;FEM;;Intermediate shaft 中文刊名：SDLG 英文刊名：Agricultural Equipment & Vehicle Engineering 机构：上海理工大学; 出版日期：2019-06-10 出版单位：农业装备与车辆工程 年：2019 期：v.57;No.335 语种：中文; 页：SDLG201906022 页数：4 CN：06 ISSN：37-1433/TH 分类号：86-89

摘要

以某轿车等速万向传动中间轴为研究对象,通过Deform-3D有限元仿真,研究避免旋锻缺陷产生的关键工艺参数:径向进给,仿真在不同径向进给量(0.3,0.5,0.65,0.8,1.0 mm)下,等速万向传动中间轴不同应力、应变的情况,为避免中间轴造成严重损伤,保证产品质量,从而确定最佳径向进给量为0.65 mm。
        Taking the intermediate shaft of constant velocity and universal transmission of a car as the research object, Deform-3D finite element simulation, To study the key process parameters for avoiding rotary forging defects-radial feed, Simulation at different radial feed rates(0.3, 0.5, 0.65, 0.8, 1.0 mm), Different stress and strain conditions on the intermediate shaft of constant velocity universal transmission, To avoid serious damage to the intermediate shaft, Guarantee product quality, In order to determine the best radial feed is 0.65 mm.

引文

[1]肖生发.汽车构造[M].北京:北京大学出版社, 2012.
    [2]韩星会,华林,胡亚民.轴类零件径向锻造压入量研究[J].锻压装备与制造技术, 2006, 41(6):75-78.
    [3]张琦,母东,靳凯强,等.旋转锻造成形技术研究现状[J].锻压技术, 2015, 40(1):1-6.
    [4]Domblesky J P, Shivpuri R, Painter B. Application of the finiteelement method to the radial forging of large diameter tubes[J].Journal of Materials Processing Technology, 1995,49(1-2):57-74.
    [5]胡建军. DEFORM-3D塑性成形CAE应用教程[M].北京:北京大学出版社, 2011.
    [6]李继光.高速铁路用空心车轴径向锻造工艺的模拟研究[D].太原:太原科技大学, 2007.
    [7]Kegg R L. Mechanics of the Rotary Swaging Process[J]. Journal of Manufacturing Science&Engineering, 1964, 86(4):317-324.