一种可循环利用卷烟包装箱的设计与试验
|
摘要
针对卷烟包装纸箱在循环利用过程中存在循环利用次数少、消耗大、易损坏等问题,研究设计了一种可多次循环利用的卷烟包装箱。通过试制与试验,确定了包装箱选用材质、结构尺寸与定型工艺;并对10个试制周转箱连续进行条烟装封箱试验,装封箱成功率为100%,循环装箱次数可达30次。试验结果表明,该卷烟包装箱具有可循环利用次数多、损耗小等优点,可用于卷烟装封箱工序中。
In view of the problems of less use,large consumption,easy damage,etc. in the recycling process of cigarette packing carton,a kind of cigarette packing box which can be re-used repeatedly was studied and designed. Through trial manufacture and experiment,the material,structure dimensions and molding process of the packing box were determined;The continuous case packing and sealing test was conducted on 10 trialmanufactured turnover boxes,the results showed that the success rate of packing and sealing was 100%,and the number of cycle packing can reach 30 times.The test results show that the cigarette packing box has the advantages of more number of cyclic utilization,less consumption,etc.,and can be used in the process of cigarette packing and sealing.
In view of the problems of less use,large consumption,easy damage,etc. in the recycling process of cigarette packing carton,a kind of cigarette packing box which can be re-used repeatedly was studied and designed. Through trial manufacture and experiment,the material,structure dimensions and molding process of the packing box were determined;The continuous case packing and sealing test was conducted on 10 trialmanufactured turnover boxes,the results showed that the success rate of packing and sealing was 100%,and the number of cycle packing can reach 30 times.The test results show that the cigarette packing box has the advantages of more number of cyclic utilization,less consumption,etc.,and can be used in the process of cigarette packing and sealing.
引文
[1]孔垂武,张磊.卷烟包装箱回收利用的实践与探索[C].武汉:中国烟草学会2013年学术年会论文集.2013:449-454.
[2]李菁,张霖.卷烟包装箱循环利用应用研究[C].武汉:中国烟草学会2013年学术年会论文集.2013:461-467.
[3]欧阳雄波.卷烟包装箱循环利用课题研究与实操分析[J].湖南烟草,2014(3):50-52.
[4]欧阳雄波.卷烟包装箱循环利用关键环节分析及提高循环利用率的对策研究[J].湖南烟草,2013(5):55-58.
[5]田润娴.构建卷烟包装箱循环利用流程提升回收利用效率[J].中国包装,2015(7):50-57.
[6]李坤,胡森,赵刚,等.装封箱机推烟装置控制系统改进[J].包装与食品机械,2017,35(1):66-68.
[7]戴晓春,常学森,李传奇,等.蝶式缓冲止回阀的结构分析及优化设计[J].流体机械,2015,43(12):41-43.
[8]张锐之,丁浩,傅栋林,等.平接型双材料的载荷位移特征与界面失效机理研究[J].机电工程,2017,34(6):567-572.
[9]宋延鹤,田张全.浅析卷烟包装箱YP11型封箱机改造[J].科技创新与应用,2015(17):116-117.
[2]李菁,张霖.卷烟包装箱循环利用应用研究[C].武汉:中国烟草学会2013年学术年会论文集.2013:461-467.
[3]欧阳雄波.卷烟包装箱循环利用课题研究与实操分析[J].湖南烟草,2014(3):50-52.
[4]欧阳雄波.卷烟包装箱循环利用关键环节分析及提高循环利用率的对策研究[J].湖南烟草,2013(5):55-58.
[5]田润娴.构建卷烟包装箱循环利用流程提升回收利用效率[J].中国包装,2015(7):50-57.
[6]李坤,胡森,赵刚,等.装封箱机推烟装置控制系统改进[J].包装与食品机械,2017,35(1):66-68.
[7]戴晓春,常学森,李传奇,等.蝶式缓冲止回阀的结构分析及优化设计[J].流体机械,2015,43(12):41-43.
[8]张锐之,丁浩,傅栋林,等.平接型双材料的载荷位移特征与界面失效机理研究[J].机电工程,2017,34(6):567-572.
[9]宋延鹤,田张全.浅析卷烟包装箱YP11型封箱机改造[J].科技创新与应用,2015(17):116-117.