注射成型和注射压缩成型PET瓶坯性能对比分析
|
摘要
采用注射成型和注射压缩成型的方法分别成型聚对苯二甲酸乙二醇酯(PET)瓶坯,并对PET瓶坯性能进行表征。对比研究了2种不同成型方法对透明PET瓶坯的外观形貌、瓶口尺寸、坯壁厚度、同心度、乙醛含量、黏度降和应力线分布状况的影响。结果表明,采用注射压缩成型方法制备的PET瓶坯具有良好的表面质量,其瓶口尺寸、坯壁厚度和同心度均满足标准;与注射成型方法相比,采用注射压缩成型方法制备的PET瓶坯的乙醛含量和黏度降更低,应力分布更为均匀,制品的残余应力更低。该工作为PET瓶坯的加工提供了一种新型、有效的成型方法。
Polyethylene terephthalate(PET)preforms are prepared by injection molding and injection compression molding,respectively.The properties of PET preforms are characterized,and the effects of the two different forming methods on the appearance,bottle size,bottle wall thickness,concentricity,AA value,IV drop and stress line distribution of PET preforms are studied.The results show that the PET preforms prepared by injection compression molding has good surface quality with the bottle size,bottle wall thickness and concentricity meeting the standards.Compared with the PET preforms prepared by injection molding method,the PET preforms prepared by injection compression molding has lower AA value and IV drop,more uniform stress distribution and lower residual stress.This work provides a new and effective molding method for PET preforms processing.
Polyethylene terephthalate(PET)preforms are prepared by injection molding and injection compression molding,respectively.The properties of PET preforms are characterized,and the effects of the two different forming methods on the appearance,bottle size,bottle wall thickness,concentricity,AA value,IV drop and stress line distribution of PET preforms are studied.The results show that the PET preforms prepared by injection compression molding has good surface quality with the bottle size,bottle wall thickness and concentricity meeting the standards.Compared with the PET preforms prepared by injection molding method,the PET preforms prepared by injection compression molding has lower AA value and IV drop,more uniform stress distribution and lower residual stress.This work provides a new and effective molding method for PET preforms processing.
引文
[1]刘方辉,钱心远,张杰.注塑成型新技术的发展概况[J].塑料科技,2009,37(3):83-88.
[2]张友根.我国注塑机的特点及发展方向[J].上海塑料,2004(1):4-8.
[3]滕秀才.高效节能注塑机关键技术分析研究[D].广州:广东工业大学,2014.
[4]赵攀峰.二板式全液压型注塑机关键技术研究[D].杭州:浙江大学,2012.
[5]注射压缩成型技术——注塑工艺的新发展[J].化工文摘,2001(2):33.
[6]邱庆军.微透镜阵列注射压缩成型工艺及双折射研究[D].长沙:中南大学,2012.
[7]许菲.注射压缩精密成型原理研究[D].北京:北京化工大学,2010.
[8]费春红.塑料注射—压缩精密成型技术及成型装置的研究[D].长春:吉林大学,2004.
[9]陈宇宏,袁渊,刘小艳,等.注射成型和注射压缩成型透明件的光学性能对比与分析[J].航空材料学报,2011,31(2):55-60.
[2]张友根.我国注塑机的特点及发展方向[J].上海塑料,2004(1):4-8.
[3]滕秀才.高效节能注塑机关键技术分析研究[D].广州:广东工业大学,2014.
[4]赵攀峰.二板式全液压型注塑机关键技术研究[D].杭州:浙江大学,2012.
[5]注射压缩成型技术——注塑工艺的新发展[J].化工文摘,2001(2):33.
[6]邱庆军.微透镜阵列注射压缩成型工艺及双折射研究[D].长沙:中南大学,2012.
[7]许菲.注射压缩精密成型原理研究[D].北京:北京化工大学,2010.
[8]费春红.塑料注射—压缩精密成型技术及成型装置的研究[D].长春:吉林大学,2004.
[9]陈宇宏,袁渊,刘小艳,等.注射成型和注射压缩成型透明件的光学性能对比与分析[J].航空材料学报,2011,31(2):55-60.