摘要
针对复杂边界油气藏中分支水平井的产能预测问题进行了深入研究。将圆形油气藏径向等分,即将齐成伟建立的圆形油气藏中辐射状分支水平井拟三维产能公式中的Q替换为nQ后,得到了扇形油气藏中水平井的拟三维产能公式。将带形油气藏纵向等分,即将齐成伟建立的带形油气藏中横向水平井拟三维产能公式中的b替换为2b、L替换为2L、Q替换为2Q后,得到了带形油气藏中顶壁横向水平井的拟三维产能公式。将带形油气藏横向等分,即将齐成伟建立的带形油气藏中纵向双分支水平井拟三维产能公式中的Q替换为2Q后,得到了半带形油气藏中离壁纵向水平井的拟三维产能公式;进一步将si替换为0、so替换为L/2后,得到了半带形油气藏中顶壁纵向水平井的拟三维产能公式。
This paper presents an in-depth analysis of productivity prediction of multi-lateral horizontal wells in fault block reservoir.By radially sectioning circular oil or gas reservoir into sectors of equal magnitude,i.e.by substituting nQ for Q in Qi Chengwei's pseudo-3-D productivity formula for radial multi-lateral horizontal well in circular oil or gas reservoir,a pseudo-3-D productivity formula for horizontal well along the angle bisector in sectoral oil or gas reservoir can be derived.By longitudinally sectioning ribbony oil or gas reservoir into two equal parts,that is,by substituting 2b for b,2L for L and 2Q for Q in Qi Chengwei's pseudo-3-D productivity formula for transverse horizontal well in ribbony oil or gas reservoir,a pseudo-3-D productivity formula for transverse horizontal well to-the-side-wall in ribbony oil or gas reservoir can be derived.By transversely sectioning ribbony oil and gas reservoir into two equal parts,that is,by substituting 2Q for Q in Qi Chengwei's pseudo-3-D productivity formula for longitudinal bilateral horizontal well in ribbony oil or gas reservoir,a pseudo-3-D productivity formula for longitudinal horizontal well off-the-middle-wall in half ribbony oil or gas reservoir can be derived.Further substituting 0 for si and L /2 for so,a pseudo-3-D productivity formula for longitudinal horizontal well to-the-middle-wall in half ribbony oil or gas reservoir can be derived.
引文
[1]叶双江,姜汉桥,孙传宗,等.断块油藏水平井产能研究及断层封堵影响分析[J].西南石油大学学报(自然科学版),2011,33(5):131-135.
[2]李晓军,张琪,路智勇.断块油藏水平井与直井组合井网渗流解析解及其应用[J].中国石油大学学报(自然科学版),2010,34(3):84-88.
[3]Табаков.平面地层分支水平井产量公式[C].全苏石油天然气科学研究院采油科技文集,1961,13:61-65.
[4]梁峰,孟维龙,刘晓辉.分支水平井产能方程式研究进展[J].石油钻采工艺,2010,32(05):64-68.
[5]齐成伟.环形裂缝群激发的渗流场之复分析[J].内蒙古石油化工,2009,35(21):39-40.
[6]齐成伟.水平井渗流场的进一步探讨[J].内蒙古石油化工,2009,35(24):192-195.
[7]齐成伟.环形井群激发的渗流场之复分析[J].内蒙古石油化工,2010,36(2):32-35.
[8]齐成伟.裂缝激发的渗流场之运动学分析[J].内蒙古石油化工,2010,36(6):35-36.
[9]Qi Chengwei,Wang Lilei,Li Bin.Several questions about multi lateral horizontal well productivity formulae[J].Applied Mechanics and Materials.2011,(71-78):4953-4957.
[10]齐成伟,龙芝辉,汪志明.水平井流入剖面的简捷计算方法[J].石油钻探技术,2011,39(4):90-94.
[11]齐成伟,龙芝辉,汪志明,等.带形地层中裂缝激发的渗流场之复分析[J].内蒙古石油化工,2010,36(22):38-39.
[12]陈德民,崔一平,高立超,等.分支水平井产能公式的精度分析[J].油气田地面工程,2011,30(3):15-17.
[13]陈元千,范子菲,冯文光,等.带状低渗气藏中横向水平井的产能公式[A].谢文彦,张方礼.第五届全国特种油气藏技术研讨会优秀论文集[C].沈阳:辽宁科学技术出版社,2012:528-531.
[14]张烈辉,熊友明,陈军,等.带状低渗透油气藏中纵向双分支水平井在不同完井方式下的产能公式[J].科学技术与工程,2012,12(25):6454-6457.
[15]游支云,吕劲,郭柏云,等.带形油气藏中水平井方向优选研究[J].石油天然气学报,2012,34(5):103-106.