摘要
近年来,多种口腔修复用的CAD/CAM系统问世,一门新兴的口腔修复工艺已形成。本文就CAD/CAM技术的发展历史和组成、成熟椅旁CAD/CAM系统和修复材料、临床应用及存在的问题等方面作一综述。
In recent years,a variety of dental CAD/CAM systems have come out,which reflects the formation of an emerging prosthodontics technology. This article aims to review the development history and component of CAD/CAM technology,the mature chairside CAD/CAM systems as well as the prosthodontic materials,the clinical applications and the existing problems of chairside CAD/CAM technology.
引文
[1]Duret F,Preston JD.CAD/CAM imaging in dentistry[J].Curr Opin Dent,1991,1(2):150-154.
[2]Mormann WH,Brandestini M,Lutz F,et al.Chair side computer-aided direct ceramic inlays[J].Quintessence Int,1989,20(5):329-339.
[3]刘一帆,郑秀丽,于海,等.数字化印模技术在口腔修复中的应用[J].实用口腔医学杂志,2016,32(6):879-885.
[4]Sannino G,Germano F,Arcuri L,et al.CEREC CAD/CAM chairside system[J].Oral&Implantol,2014,7(3):57-70.
[5]Galhano P,Pellizzer,Mazaro Q.Optical impression systems for CAD-CAM restorations[J].J Craniofac Surg,2012,23(6):e575-e579.
[6]Bohne L,Neto T,Ahmed S,et al.CEREC chairside system to register and design the occlusion in restorative dentistry:A systematic literature review[J].J Esthet Restor Dent,2016,28(4):208-220.
[7]刘一帆,郑秀丽,王伟娜,等.数字化设计技术在口腔修复中的应用[J].实用口腔医学杂志,2017,33(1):129-133.
[8]Renne W,Ludlow M,Fryml J,et al.Evaluation of the accuracy of7 digital scanners:An in vitro analysis based on 3-dimensional comparisons[J].J Prosthet Dent,2017,118(1):36-42.
[9]Bindl A,Luthy H,Mormann WH.Fracture load of CAD/CAM-generated slot-inlay FPDs[J].Int J Prosthodont,2003,16(6):653-660.
[10]Giordano R.Materials for chairside CAD/CAM-produced restorations[J].J Am Dent Assoc,2006,137(Suppl):14S-21S.
[11]Li R,Wai K,Chow TW,et al.Ceramic dental biomaterials and CAD/CAM technology:state of the art[J].J Prosthodont Res,2014,58(4):208-216.
[12]刘诗铭,刘峰.椅旁CAD/CAM修复材料分类和新进展[J].口腔医学,2017,37(8):673-677.
[13]陈曦,章非敏,胡建.两种不同厚度椅旁CAD/CAM全瓷材料断裂强度的实验研究[J].南京医科大学学报(自然科学版),2015,35(11):1632-1636.
[14]Magne P,Schlichting LH,Maia HP,et al.In vitro fatigue resistance of CAD/CAM composite resin and ceramic posterior occlusal veneers[J].J Prosthet Dent,2010,104(3):149-157.
[15]魏冬豪,田杰华,邸萍.椅旁数字化系统在种植修复中的应用与发展[J].口腔颌面修复学杂志,2017,18(1):55-59.
[16]王林虎,张昀,陈晓建,等.CEREC 3制作全瓷贴面修复前牙的临床观察[J].口腔颌面修复学杂志,2016,17(1):27-30.
[17]Otto T.Up to 27-years clinical long-term results of chairside Cerec1 CAD/CAM inlays and onlays[J].Int J Comput Dent,2017,20(3):315-329.
[18]李蓉,蒋滔,王贻宁,等.Cerec CAD/CAM全瓷嵌体和高嵌体3年临床研究[J].口腔医学研究,2005(6):664-666.
[19]程为,韩彦峰,蒋瑞芳,等.椅旁CAD/CAM系统与技工室制作全锆冠的临床比较研究[J].口腔颌面修复学杂志,2016,17(4):232-234.
[20]Fages M,Raynal J,Tramini P,et al.Chairside computer-aided sesign/computer-aided manufacture all-ceramic crown and endocrown restorations:a 7 year survival rate study[J].Int JProsthodont,2017,30(6):556-560.
[21]Otto T,M9rmann WH.Clinical performance of chairside CAD/CAM feldspathic ceramic posterior shoulder crowns and endocrowns up to 12 years[J].Int J Comput Dent,2015,18(2):147-161.
[22]Fasbinder J,Dennison B,Heys D,et al.A clinical evaluation of chairside lithium disilicate CAD/CAM crowns:a two-year report[J].J Am Dent Assoc,2010,141(2):10-14.
[23]Mostafa Z,Ruse D,Ford L,et al.Marginal fit of lithium disilicate crowns fabricated using conventional and digital methodology:a three-dimensional analysis[J].J Prosthodont,2017,1(9):1-8.
[24]Skramstad M,Fasbinder J.Full-contour zirconia fixed partial dentures as chairside applications:a case report[J].Compend Contin Educ Dent,2016,37(9):648-654.
[25]柳正明,余青,周峰,等.计算机辅助设计与制作复杂固定桥[J].实用口腔医学杂志,2011,27(5):658-662.
[26]Joda T,Brgger U.Time-efficiency analysis comparing digital and conventional workflows for implant crowns:a prospective clinical crossover trial[J].Int J Oral Maxillofac Implants,2015,30(5):1047-1053.
[27]Joda T,Brgger U.Digital vs.conventional implant prosthetic workflows:a cost/time analysis[J].Clin Oral Implants Res,2015,26(12):1430-1435.
[28]Nejatidanesh F,Shakibamehr AH,Savabi O.Comparison of marginal and internal adaptation of CAD/CAM and conventional cement retained implant-supported single crowns[J].Implant Dent,2015,25(1):103-108.
[29]Basaki K,Alkumru H,De Souza G,et al.Accuracy of digital vs.conventional implant impression approach:a three-dimensional comparative in vitro analysis[J].Int J Oral Maxillofac Implants,2017,32(4):792-799.
[30]曹怡雯,雷文涛.椅旁CAD/CAM修复系统在前牙种植美学修复中的应用[J].中国口腔种植学杂志,2013,18(2):66.
[31]王勇.口内数字印模技术[J].口腔医学,2015,35(9):705-709+743.
[32]朱国慧,孙迎春,高平.口腔数字化印模精度的研究与进展[J].口腔颌面修复学杂志,2017,18(2):125-128.
[33]苏庭舒,孙健,陈丽萍.口内数字化印模扫描重复性的研究[J].口腔颌面修复学杂,2014,15(5):291-296.
[34]Imburgia M,Logozzo S,Hauschild U,et al.Accuracy of four intraoral scanners in oral implantology:a comparativein vitro study[J].BMC Oral Health,2017,17(1):92-105.
[35]Baroudi K,Ibraheem SN.Assessment of chair-side computer-aided design and computer-aided manufacturing restorations:a review of the literature[J].J Int Oral Health,2015,7(4):96-104.