摘要
本文结合高速公路的实际情况,明确了高速公路服务区污水排放执行标准和排污系统主要的设计参数。通过对重庆地区部分已建服务区排污系统运行现状的调查,对服务区常用的几种污水处理工艺进行了比较和分析,得出最适合服务区的污水处理工艺。同时针对目前服务区排污系统的管理存在的问题,提出了相应的建议。通过上述探讨以求对高速公路服务区排污系统的设计与管理工作的系统化、规范化具有一定的现实意义。
Based on the actual conditions of the expressway, this paper clarifies the implementation standards of sewage discharge in the expressway service area and the main design parameters of the sewerage system Through the investigation of the status quo of the sewage system operation in some established service areas in Chongqing, several kinds of commonly used sewage treatment processes in the service area were compared and analyzed, and the sewage treatment process most suitable for the service area was obtained. At the same time, in response to the existing problems in the management of the sewerage system in service areas, corresponding recommendations are put forward. Through the above discussion, we will seek to promote the systematization and standardization of the design and management of the sewerage system in the expressway service area.
引文
[1]GB8978-1996,污水综合排放标准[S].
[2]GB18918-2002,城镇污水处理厂污染物排放标准[S].
[3]GB50015-2003,建筑给水排水设计规范(09版)[S].
[4]胡博,何霞,张晓宁,等.高速公路服务区污水水质水量特征调查[J].净水技术,2010,29(5):46-49.
[5]陈肖飞,林新斌.高速公路服务区污水处理现状及对策[J].现代交通技术,2007,4(1):88-91.
[6]班福忱,李亚峰,程琳,等.高速公路服务区污水处理工程[J].中国给水排水,2008,24(16):75-77.
[7]田伟,何娟,杨志敏,等.重庆高速公路服务区污水特征及处理工艺遴选[J].环境科学与技术,2012,35(3):90-93.